11-26-2016, 08:38 AM | #1 |
Drives: 2015 ss camaro, 2015 c7 Join Date: Nov 2016
Location: St Augustine fl
Posts: 3
|
Parting out a 2014 Camaro and a 2014 ZO6 Corvette
Both run perfect camaro drives but is totalled.corvette runs perfect also cannot drive due to spindle being broke
All remaining parts up for grabs |
11-26-2016, 08:43 AM | #2 |
Account Suspended
Drives: 2010 2SS & 2013 ZL1 Vert Join Date: Mar 2015
Location: Watching Airplanes Takeoff
Posts: 348
|
Poor cars...
|
11-26-2016, 08:58 AM | #3 |
Drives: 2015 ss camaro, 2015 c7 Join Date: Nov 2016
Location: St Augustine fl
Posts: 3
|
Ya they were on the list to be crushed so I bought them I figured that there was somebody out there that could use the parts to do a swap out from a 6 to 8
|
11-26-2016, 09:09 AM | #4 | |
Account Suspended
Drives: 2010 2SS & 2013 ZL1 Vert Join Date: Mar 2015
Location: Watching Airplanes Takeoff
Posts: 348
|
Quote:
I wonder if the tech screen with the backup camera could be installed in my 10'? Probably a stupid question, I'm a little more old school I guess. |
|
11-26-2016, 09:13 AM | #5 |
|
Isn't that a 2016 Camaro?
__________________
2013 VR Camaro 2SS/RS LS3
Small, but effective mod list: Roto-Fab Intake, TSP 2" Long tubes, TSP catless mids, MSD spark plug wires, stock catback, Elite Catch Can, APEX washer relocation and scoop, VMAX throttle body, Diablo InTune-Tuned by Matt@FSP, and a JacFab license plate bracket. |
11-26-2016, 09:25 AM | #6 |
Drives: 2013 LS Join Date: May 2013
Location: Nashville
Posts: 679
|
Yeah I was thinking the same thing. That's definitely at a minimum at 16. No big deal, but this might be better suited for the camaro6 forum. You would be able to sell the parts faster.
__________________
|
11-26-2016, 10:10 AM | #7 |
Drives: 2015 ss camaro, 2015 c7 Join Date: Nov 2016
Location: St Augustine fl
Posts: 3
|
Trying to delete it
Trying to delete it soon as I figure out it will be gone
|
11-26-2016, 11:23 AM | #8 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Front brakes from the Z06???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
11-26-2016, 11:27 AM | #9 |
Not a z06....or a 14 Camaro....
This whole post is suspect... Sent from my iPhone using Tapatalk |
|
11-26-2016, 02:40 PM | #10 |
Drives: 2017 Jaguar F Type R Tuned 498awhp Join Date: Apr 2013
Location: Canada
Posts: 871
|
You have no clue what cars you are parting out. Delete this thread please.
__________________
JRE cammed w.full bolt ons 444rwhp/422rwtq SOLD
2017 Jaguar F Type R ''Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.'' - F. Bueller |
11-29-2016, 11:08 PM | #11 |
Drives: 2011 SS2 inferno orange Join Date: Nov 2013
Location: CA
Posts: 184
|
List to be crushed? Omg this couldn't be more fake. Both those cars would be sold in a hot minute
|
11-30-2016, 06:04 PM | #12 |
im guessing he only accepts money order and wire transfer lol
__________________
LR NightFury Cam, 2" American Racing Headers w/ 3" ARH Catback, Cold Air Inductions Intake,
ZL1 6 Piston Brake Upgrade, Pedderized |
|
11-30-2016, 07:17 PM | #13 |
Started#gottalovethatblue
|
Neither vehicle is a '14 and the Corvette isn't a Z06. Can you say scam?
__________________
|
11-30-2016, 08:00 PM | #14 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
|
|
|
|