09-17-2012, 12:02 PM | #1 |
Drives: 2013 Camaro 2SS Join Date: Aug 2012
Location: Chicago, IL
Posts: 143
|
2013 SS, O2 Sensor's Impacted Issue
I just wanted to see if anyone else got new headers and came across this issue. Apparently the stock o2 sensors; 2 front and 2 rear; were so impacted in that when taking them out it strips the actual o2 sensor threading. Has anyone else heard or has had this issue on their 2013?
|
09-17-2012, 01:14 PM | #2 |
Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009
Location: Mich
Posts: 4,482
|
Follow the service manual instructions, only remove O2's when hot and they won't strip out. Cold, the pipe will have a death grip on the threads. Either drive the car, or heat the pipe bung up with a torch.
|
09-17-2012, 02:10 PM | #3 |
Drives: 2011 Camaro SS/RS LS3 Join Date: Aug 2010
Location: Texas
Posts: 1,630
|
when I put my high flow cats in I was able to get the one stubborn one out by simple rocking the wrench back and forth, took a minute but it did come out without stripping anything.
__________________
Yeah, I'll get around to it...
|
|
|
|
|