MRT V2 Installed on my 2011 Camaro LT1/RS/M6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blkonblk17 · 10-19-2010, 11:54 AM

Here are some pics. My initial response upon starting it up was "wow, this sounds awesome" I can't agree more. It sounds amazing!! My only complaint is even though I bolted both clamps the same and made sure they were tight the right side seems to move upon driving causing the exhaust tip to un-align. I'm planning to get it welded today. For anyone thinking about it and are on that point that you are contemplating it, don't think just do it! You will not be disappointed. Any questions just ask.

ron10 · 10-19-2010, 12:09 PM

very nice.

devildoc · 10-19-2010, 12:17 PM

scrming · 10-19-2010, 12:18 PM

Very cool!

I did notice one thing... You need to slide the clamp more towards the end of then pipe. In fact the clamp should overlap the stock pipe and the new pipe a little bit... You may want to give that a try...

Edge.128 · 10-19-2010, 12:40 PM

Quote:

Originally Posted by scrming

Very cool!

I did notice one thing... You need to slide the clamp more towards the end of then pipe. In fact the clamp should overlap the stock pipe and the new pipe a little bit... You may want to give that a try...

good advice as always!!

OP nice pictures!!

I can't wait to install mine

Blkonblk17 · 10-19-2010, 05:09 PM

I was able to take a quick video, Enjoy!

PS: Remember, you can watch HD

rtcat600man · 10-19-2010, 07:45 PM

Quote:

Originally Posted by Blkonblk17

Here are some pics. My initial response upon starting it up was "wow, this sounds awesome" I can't agree more. It sounds amazing!! My only complaint is even though I bolted both clamps the same and made sure they were tight the right side seems to move upon driving causing the exhaust tip to un-align. I'm planning to get it welded today. For anyone thinking about it and are on that point that you are contemplating it, don't think just do it! You will not be disappointed. Any questions just ask.

That is exactly the same issue I experienced. I was able to install the left one in 5 minutes no problems. The left one however I fought with for a very long time. Finally concluded I was going to need to have them welded. I went right to the source (MRT) to have the welding done. This way I could talk to Scott (the owner) and his team about the issue we are experiencing with the left one still moving around after installing.

Wouldn't have done anything different. Absolutely love the sound these produce.

2010 SSRS · 10-19-2010, 07:53 PM

looks great

CamaroDood · 10-19-2010, 10:06 PM

looks sick!! gonna order mine as soon as the wallet can handle a weight loss haha

bossbunny · 10-19-2010, 10:17 PM

Awesome!! Glad you like it, I love my MRT 2 (but I cut my resonatos off as well)!!

Sevn86 · 10-19-2010, 11:53 PM

Quote:

Originally Posted by badgebunny

Awesome!! Glad you like it, I love my MRT 2 (but I cut my resonatos off as well)!!

Hows that sound? is it louder and what about drone?

whamslam3 · 10-20-2010, 04:22 AM

Quote:

Originally Posted by badgebunny

Awesome!! Glad you like it, I love my MRT 2 (but I cut my resonatos off as well)!!

can u make a vid of that plz?

newagemuscle · 10-20-2010, 05:20 AM

Is your car a one of a kind? I notice you have an LT1 in the car based on the title. I hope that s a typo.

xpanda305x · 10-20-2010, 05:36 AM

see you went MRT v2.0

glad you got an exhaust. idunno the 2.0 isnt for me

did you put the SS tips or ??? lmk!

10-19-2010, 11:54 AM	#1
Blkonblk17 Drives: 2011 Camaro RS Join Date: Oct 2010 Location: Miami Posts: 80	MRT V2 Installed on my 2011 Camaro LT1/RS/M6 Here are some pics. My initial response upon starting it up was "wow, this sounds awesome" I can't agree more. It sounds amazing!! My only complaint is even though I bolted both clamps the same and made sure they were tight the right side seems to move upon driving causing the exhaust tip to un-align. I'm planning to get it welded today. For anyone thinking about it and are on that point that you are contemplating it, don't think just do it! You will not be disappointed. Any questions just ask.

10-19-2010, 12:17 PM	#3
devildoc Drives: '12 Toyota Tacoma Dbl Join Date: Sep 2009 Location: Beaufort, SC Posts: 1,275 View My Garage	__________________ MRT V2\|Trifecta Tune\|Airaid\|ARH LTs\|Eibach Sways STANDING 1/4MI: 13.948@99.87 6600RPM HP/TQ Gains - 30.54HP/24.3TQ (NOT PEAK)

10-19-2010, 12:18 PM	#4
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,745	Very cool! I did notice one thing... You need to slide the clamp more towards the end of then pipe. In fact the clamp should overlap the stock pipe and the new pipe a little bit... You may want to give that a try... __________________ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

10-19-2010, 07:53 PM	#8
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	looks great __________________ Jannetty Racing JRE Street Package

10-20-2010, 05:20 AM	#13
newagemuscle Philippians 4:13 Drives: SLP Supercharged LS3 Join Date: Aug 2009 Location: The Motor City - Michigan Posts: 2,902 View My Garage	Is your car a one of a kind? I notice you have an LT1 in the car based on the title. I hope that s a typo. __________________

10-19-2010, 12:09 PM	#2
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	very nice.

10-19-2010, 10:06 PM	#9
CamaroDood Drives: 2011 Camaro 2Lt/RS Join Date: Aug 2010 Location: Phoenix,Az. Posts: 106	looks sick!! gonna order mine as soon as the wallet can handle a weight loss haha

10-19-2010, 10:17 PM	#10
bossbunny Mrs. Bunny to you Drives: Not a Camaro Join Date: May 2009 Location: Cut 'N Shoot Texas Posts: 24,336	Awesome!! Glad you like it, I love my MRT 2 (but I cut my resonatos off as well)!!

10-20-2010, 05:36 AM	#14
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	see you went MRT v2.0 glad you got an exhaust. idunno the 2.0 isnt for me did you put the SS tips or ??? lmk!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT5 Camaro pics	brantley847	Camaro Photos \| Spyshots \| Video \| Media Gallery	93	05-27-2013 08:35 PM
Over 230 Satisfied 2010 Camaro Customers! Paddock Chevrolet has 40 in stock NOW	camarojoe	Dealer Camaros for Sale	2	05-24-2010 05:58 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 10:29 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM