Powder Coating companies in the Barrie, Ontario area?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CaughtHerEyes · 02-23-2011, 03:23 PM

Hey guys,
I'm looking to get my stock 20" rims powder coated flat black but I've been a little unsuccessful in finding any companies in my area that provide this service. If I have to go to the GTA I will, for the right price

I've tried calling Norcoat but that number brings up an answering service for some Realty company. I've also tried MC Laserwerks in Barrie but they have apparently gone out of business as of January.

Any help would be appreciated guys!
Thanks!

CDN SS · 02-23-2011, 03:39 PM

I've had work done by this company but they are located in St. Catharines.

http://www.ppc-f.com/

Burnt_RS · 02-23-2011, 06:33 PM

I have talked to the guys from Afterburner Coatings, in Bradford. They had a booth last fall at the Toronto Snowmobile Show. They had lots of pictures and samples on hand. It was nice to see what the quality level was, up close. I will use them for my next powder coating project. Their website doesn't work at the moment, but maybe try their phone:

905-775-5222

(side note: I'm from the Barrie area, bring down your SW to one of the cruise nights / shows this summer, It'd be nice to see another 1LT/RS in the area.)

2010victoryredss_ron · 02-23-2011, 09:12 PM

i am looking to get a set done in flat black as well. i may have a guy that will do them, but havent persued it to heavy yet... i will hopefully ask him next week.. but im in Kitchener/Waterloo area..

CanadianCamaro · 02-24-2011, 01:45 PM

Ask Dennis (TJ91)

Matster · 02-24-2011, 04:04 PM

I haven't used these guys so I can't tell you anything about the quality of their work. I did talk to them about a year ago when I was looking to have my exhaust ports ceramic coated. Seem like decent guys. http://www.fireballcoatings.com/inde...tpage&Itemid=1 They are located in Erin but also have a drop off depot in Mississauga, I believe it was at 1814 Drew Road.

Burnt_RS · 02-24-2011, 06:07 PM

Quote:

Originally Posted by Matster

I haven't used these guys so I can't tell you anything about the quality of their work. I did talk to them about a year ago when I was looking to have my exhaust ports ceramic coated. Seem like decent guys. http://www.fireballcoatings.com/inde...tpage&Itemid=1 They are located in Erin but also have a drop off depot in Mississauga, I believe it was at 1814 Drew Road.

I forgot about them!

They also do loads of p.coating for the snowmobile industry. From everything I've seen and read on a snowmobile forum, they do top notch work.

2010victoryredss_ron · 02-24-2011, 06:42 PM

i just emailed them for a quote, i do some work in erin, i should drop by and check them out....

CaughtHerEyes · 02-27-2011, 02:40 PM

Thanks for the info guys! I'll make a few calls and see where it goes from there!

Quote:

Originally Posted by Burnt_RS

I have talked to the guys from Afterburner Coatings, in Bradford. They had a booth last fall at the Toronto Snowmobile Show. They had lots of pictures and samples on hand. It was nice to see what the quality level was, up close. I will use them for my next powder coating project. Their website doesn't work at the moment, but maybe try their phone:

905-775-5222

(side note: I'm from the Barrie area, bring down your SW to one of the cruise nights / shows this summer, It'd be nice to see another 1LT/RS in the area.)

I'd love to come out to some cruise nights and or shows. Didn't get a chance last summer.

2010victoryredss_ron · 03-03-2011, 10:35 PM

got a reply from "fireball coatings" in erin.
they quote:

:Budget $75.00 per rim for any standard colour. That price includes all stripping, minor repairs and prep required. We sandblast in house removing the existing finish so the new powder adheres directly to clean etched metal which improves adhession and chip resistance.Turn around is 4-5 days right now

Matster · 03-04-2011, 05:39 AM

Quote:

Originally Posted by 2010victoryredss_ron

got a reply from "fireball coatings" in erin.
they quote:

:Budget $75.00 per rim for any standard colour. That price includes all stripping, minor repairs and prep required. We sandblast in house removing the existing finish so the new powder adheres directly to clean etched metal which improves adhession and chip resistance.Turn around is 4-5 days right now

That seems pretty reasonable.

02-23-2011, 03:23 PM	#1
CaughtHerEyes Drives: Summit White 1LT RS w/sunroof Join Date: Apr 2010 Location: Orillia, Ontario Posts: 68	Powder Coating companies in the Barrie, Ontario area?? Hey guys, I'm looking to get my stock 20" rims powder coated flat black but I've been a little unsuccessful in finding any companies in my area that provide this service. If I have to go to the GTA I will, for the right price I've tried calling Norcoat but that number brings up an answering service for some Realty company. I've also tried MC Laserwerks in Barrie but they have apparently gone out of business as of January. Any help would be appreciated guys! Thanks!

02-23-2011, 03:39 PM	#2
CDN SS Steve from Canada. Drives: 2010 SW SS/RS with Inferno package. Join Date: Mar 2009 Location: Niagara Ontario Canada Posts: 1,969 View My Garage	I've had work done by this company but they are located in St. Catharines. http://www.ppc-f.com/ __________________

02-23-2011, 09:12 PM	#4
2010victoryredss_ron Born: August 27, 2009 Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009 Location: Waterloo, Ontario, Canada Posts: 866 View My Garage	i am looking to get a set done in flat black as well. i may have a guy that will do them, but havent persued it to heavy yet... i will hopefully ask him next week.. but im in Kitchener/Waterloo area.. __________________ Victory Red 2SS/RS Vin# A9130145

02-24-2011, 01:45 PM	#5
CanadianCamaro Drives: 2SS/RS IOM - A.K.A. DA ;) Join Date: Jan 2009 Location: Ontario Canada Posts: 2,046	Ask Dennis (TJ91) __________________ "BBOMG - More than just a car show.... It's an experience!"

02-24-2011, 04:04 PM	#6
Matster Drives: 2010 2SS/RS IOM/IOM #3625 Join Date: Jun 2008 Location: Greater Toronto Area Posts: 1,902 View My Garage	I haven't used these guys so I can't tell you anything about the quality of their work. I did talk to them about a year ago when I was looking to have my exhaust ports ceramic coated. Seem like decent guys. http://www.fireballcoatings.com/inde...tpage&Itemid=1 They are located in Erin but also have a drop off depot in Mississauga, I believe it was at 1814 Drew Road. __________________ 666 EVIL RWHP BUILT AND TUNED BY SHIFTED PERCEPTIONS INC.(SPi) 416 Forged Stroker, E-Force Supercharger, Blower Cam, Rotofab CAI, Stainless Works 2" LT Headers and 3" Exhaust, LPE ZR1 Twin Disc Clutch, DSS 1400 HP Axles, Pfadt Performance Kit Stage 3.

02-23-2011, 06:33 PM	#3
Burnt_RS Drives: '10 1LT/RS Join Date: Apr 2010 Location: Canada Posts: 610	I have talked to the guys from Afterburner Coatings, in Bradford. They had a booth last fall at the Toronto Snowmobile Show. They had lots of pictures and samples on hand. It was nice to see what the quality level was, up close. I will use them for my next powder coating project. Their website doesn't work at the moment, but maybe try their phone: 905-775-5222 (side note: I'm from the Barrie area, bring down your SW to one of the cruise nights / shows this summer, It'd be nice to see another 1LT/RS in the area.)

02-24-2011, 06:42 PM	#8
2010victoryredss_ron Born: August 27, 2009 Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009 Location: Waterloo, Ontario, Canada Posts: 866 View My Garage	i just emailed them for a quote, i do some work in erin, i should drop by and check them out.... __________________ Victory Red 2SS/RS Vin# A9130145

03-03-2011, 10:35 PM	#10
2010victoryredss_ron Born: August 27, 2009 Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009 Location: Waterloo, Ontario, Canada Posts: 866 View My Garage	got a reply from "fireball coatings" in erin. they quote: :Budget $75.00 per rim for any standard colour. That price includes all stripping, minor repairs and prep required. We sandblast in house removing the existing finish so the new powder adheres directly to clean etched metal which improves adhession and chip resistance.Turn around is 4-5 days right now __________________ Victory Red 2SS/RS Vin# A9130145

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ceramic coating in the DFW area?	caverman	USA - Texas	8	07-01-2010 10:15 PM
Any Barrie, Ontario Camaros?	Burnt_RS	Canada	5	06-09-2010 06:56 AM
League City/Dickinson Texas Powder Coating	thebrander	USA - Texas	9	04-04-2010 09:33 AM
POWDER COATED WHEEL EXCHANGE PROGRAM !! L@@k !!	ProdigyCoatings	Wheels / Tires	8	01-31-2010 09:17 AM
Clear Bra installed in the Mississippi area.....any recommended companies?	DCJ	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	3	08-24-2009 09:38 PM