![]() |
![]() |
#1 |
Quit being a pu$$y
|
Rear view camera and LCD mirror install on my vert.
Not really sure where to post this, but it looks like there might be some differences between the coupe and vert for this, so I will post it here.
The ZL1 will have a back up camera and what sucks is that our cars already have the reverse wire going to the mirror and there is a spot blocked off by the license plate that looks like the location where the camera will be. Ok, first off the parts you will need are: 1. rear view camera 2. rear view mirror with LCD screen (i used one out of an 2011 GM truck) 3. a harness to connect the mirror to your stock connector (you can also wire it up yourself, I was going to do this, but 2SSRS had a great price on a ready to go harness) This whole process took about a couple hours since this is the first time I have taken apart the interior of a 5th gen. I has very impressed at how well the interior pieces came off and snapped back in. First thing I did was take off the A pillar covers, these just unsnap at the top and then you just slide the bottom out of the dash. BE CAREFUL, with the drivers side one, it has what looks like a microphone attached on the inside of it. This pops right out of the clip. Next you will be taking off the top trim on the very top of the windsdield (the part that the convertible top attaches to). This part has a bunch of clips that you just pull on straight up. Next you will remove the stock mirror. Pull off the little plastic cover that houses the connector. The mirror's mount has a torx screw that locks it in place. Loosen this screw and just pull the mirror up and out. Also disconect the connector. You can go a head and mount the new mirror. Next you will be pulling off the trim piece that has the sun visors, interior lamp and garage door/vert top buttons. This piece has 4 Torx 15 screws holding it in. these screws are covered by the sun visors and little removable tabs. You remove these tabs with a thin flat head screw driver from the outer most side (I almost broke mine trying to remove them from the inner most side, but luckily they are VERY flexible. I will post the pictures in order from drivers side to passenger). After removing the little covers unscrew the 4 trorx screws and then pull down on the trim piece where it meets the windshield (it will only come loose on the front) after you undo all of these clips you will pull the whole piece back toward the rear of the car. There are a couple connectors on either end I left plugged in so it will hold the trim piece. You can now plug in the new adapter harness and run all the wires along the top trim piece and down the a pillar. Next up you will take off the side dash panel, kick panel and rocker trim panel on the driver's side. Also pull off the rear trim panel right above the rear sail panel, then the rear sail panel (be sure to unplug the rear speaker that is attached to the sail panel). You can also pull out the rear seat bottom by just pulling up on it and making sure it doesn't get caught on the seat belt receivers. Now you have to pull off the rear license plate and pretty much all the panels out of the trunk (you have to do this part with the top up). These panels are pretty easy to pull out. BE CAREFULL with the sensor attached to the side molded carpet panel. Now you can look at my picture so you can see where to run the cable through. I used a coat hanger to snake my cable through this little opening. Now all you have to do is mount whatever camera you have, drill a hole for the wire, run the wires and put all the trim pieces back on.
__________________
Last edited by SUX2BU; 03-23-2011 at 12:48 AM. |
![]() |
![]() |
![]() |
#2 |
![]() |
Great post, I could not do this but I am impressed with those that can!
__________________
|
![]() |
![]() |
![]() |
#3 |
Quit being a pu$$y
|
A side note: the video quality has some interference. I'm thinking bunching up the excess wire like that and putting it right next to the battery wasn't the best idea. I will fix it tomorrow.
__________________
|
![]() |
![]() |
![]() |
#4 |
NorCal Camaro➎ Member
|
how much in parts??
__________________
|
![]() |
![]() |
![]() |
#5 |
Quit being a pu$$y
|
I spent about $380, but there are better deals on mirrors out there (I jumped on the first one I saw) so you could get this really close to about $300.
Almost forgot to comment on the actual mod itself! LOL The mirror is HUGE. It borders on the line of almost too big, but I like it. With the top down it looks like I am looking at my 58" plasma screen out of the back of my car. You can see EVERYTHING. It actually sits up pretty high so the top 3/8 inch or so is useless because it is blocked by the upper console but I like it. I still have to adjust the actual tilt of the camera to see what I like.
__________________
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 2SS RS SIM Litho # 193 Join Date: Jun 2007
Location: West Hills, CA
Posts: 5,085
|
Nice job
__________________
|
![]() |
![]() |
![]() |
#7 |
Old '71 Owner
Drives: 11 Camaro Vert;97 Malibu;03 Venture Join Date: Apr 2010
Location: Tacoma, WA
Posts: 396
|
That's a fantastic job, thanks for the great how-to. A rear camera is HIGH on my list of priorities.
With the 2012 having the option for a rear view camera designed for the car itself, I wonder if waiting for a couple of months wouldn't result in a camera designed specifically for the car with the guide lines and all. I'll be keeping an eye out on this topic to be sure. Tib |
![]() |
![]() |
![]() |
#8 |
![]() Drives: "11 2SS/RS VR vert BG/BG SW stripes Join Date: Nov 2010
Location: Northern NJ
Posts: 385
|
Great job!, waaaay beyond my abilities but great idea.
|
![]() |
![]() |
![]() |
#9 |
Top Down Fun
Drives: 11 2SS/RS IOM Vert Join Date: Jun 2009
Location: Washington Twp, MI
Posts: 457
|
I agree with Tiberious and am going to wait a little bit, but I am spoiled by this feature in my other vehicles and can't wait to add it.
__________________
2011 Chevrolet Camaro Convertible 2SS RS M6 IOM Vert! IO Interior, Factory Hurst, Painted GFX, Black Rally Stripes, Front/Rear/Bowtie Blackouts, QTP Cutouts, Extra Cupholders!
LED Tails, LED DRL's (always on!), Ghosted "Concept" LED Side Markers, LED Tag Lights, Tinted LED Reverse Lights, Chrome Front Turn Signal Bulbs! My Build Thread Daily Driver: 2016 Ford Fusion Titanium with 2 car seats in the back! |
![]() |
![]() |
![]() |
#10 |
![]() Drives: 2011 Camaro pace car Join Date: Mar 2011
Location: IL
Posts: 99
|
Nice work, It seems a bit easier for me to just turn my head and look like I've been doing for the last 35 years, but hats off to you on the great job!
|
![]() |
![]() |
![]() |
#11 |
EMERALD COAST CAMAROS
Drives: None Join Date: Feb 2010
Location: Cridersvile, OHIO
Posts: 2,973
|
Nice job on the mod but how long did you have your Camaro when you started this mod? I mean I would at least driven it a awhile and enjoyed driving it before I started disassembling it. But to each his own.
![]()
__________________
|
![]() |
![]() |
![]() |
#12 |
Quit being a pu$$y
|
4 days. You should see the room full of parts I have waiting to go on. The only thing I am waiting on to start tearing her apart is the 1/4 mile track to be open so I can get my bone stock 1/4 mile times and dyno numbers. If the track was open the night I got it I would have been there that night and had her apart the next morning!
__________________
|
![]() |
![]() |
![]() |
#13 |
Savant
|
I have a mirror from brandmotion (OEM supposedly) being installed today. I didn't have the nerve to try it myself. Not cheap, but apparently meant for the 2010+ camaro. Supposedly mine will be the first vert install.
__________________
2011 Vert 2SS/RS Cyber Gray
11/29/2010 - (1100) Order Placed 01/28/2011 - (3800) Order produced 03/01/2011 - (4200) Shipped 03/16/2011 - DELIVERED View my Garage Last edited by Starminder; 03-23-2011 at 02:16 PM. Reason: corrected vendor name |
![]() |
![]() |
![]() |
#14 |
Old '71 Owner
Drives: 11 Camaro Vert;97 Malibu;03 Venture Join Date: Apr 2010
Location: Tacoma, WA
Posts: 396
|
If it's intended for the Camaro, will it have guide lines or just the image? I'll take any help I can get keeping from hitting hidden objects....and yes, I look too!
Tib |
![]() |
![]() |
|
|
![]() |
Thread Tools | |
|
|