Interior Stitching Color Choice. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Scarrzz · 11-21-2011, 12:57 PM

.

Does anyone think there might be a choice of color on the interior stitching - before the cut off date for order changes?

Red is great on a red car. OK on black, gray, or white, but not so much on blue or orange.

With instant communication, how much would it cost to get them to change thread color on some of the seats?

I would pay to have matching color. Considering the current palate, I think a choice of red, white, blue, and orange would suffice.

While we're on the subject of color matching, engine cover too, plz.

------------

Edit, accidental omission of Yellow, which would be iffy with red stitching, depending on the customer's taste.

closs2sx · 11-21-2011, 01:06 PM

how bout an interior color choice as well

IOMZL1 · 11-21-2011, 01:06 PM

I second everything stated by Scarrzz. I'm ready to pay for these features.

Shurenuff · 11-21-2011, 01:07 PM

I agree with you but I think it's going to be what you see is what you get. I don't think the red accent color will look too bad on the IBM. After all red is going to be on the ZL1 badging, and everyone knows there's no shortage of those on the exterior

So you'll match there.

I think the two colors where it'll really clash is IOM and yellow. I personally like it, but I'm getting a more neutral color in AGM.

Shellza · 11-21-2011, 01:13 PM

My first post so forgive me.
Have a copy of my 1EY37 order, allocation group CAM, order # QBB---, just curious if this looks right for "first build" allocation?

Scarrzz · 11-21-2011, 01:31 PM

Quote:

Originally Posted by Shellza

My first post so forgive me.
Have a copy of my 1EY37 order, allocation group CAM, order # QBB---, just curious if this looks right for "first build" allocation?

Welcome to Camaro5.

We have an allocations thread where this question would fit nicely. It's in the stickies at the top, but here is a link.

If I knew the answer I would tell Ya, but someone there may have some insight. Just go to the last page and try it there, and we'll also add you to our list of people who have ordered.

Congrats, ZL1 is so gonna rock.

http://www.camaro5.com/forums/showthread.php?t=178692

GoldenBear · 11-21-2011, 01:34 PM

Quote:

Originally Posted by Shurenuff

I agree with you but I think it's going to be what you see is what you get.

Unfortunately, I think one can get any interior color one wants as long as it's black with red stitching. I'm not wild about black interiors, and I'd prefer a nice saddle, but I understand that in order to help keep the cost down on the ZL1, it is black with red stitching.

hognutz · 11-21-2011, 02:15 PM

Nope in chevy's world the higher end cars seem to get less options. It is to keep the cost down but I have always wonder by how much?

54,995 is base without interior option what would base be if they had gray or tan as options???

they somehow keep the base corvette cost competitive with interior choices.

JLambCWU · 11-21-2011, 02:27 PM

I second Scarz, just flew out LA to check out the ZL1 in person for the first time. I didn't like the orange stitching in the online pictures, and I REALLY do NOT like how it looks in person. I would pay a premium for grey stitching to match Ashen grey exterior.

1BADZL1 · 11-21-2011, 03:33 PM

www.notgonnahappen.com

Pappa Joe · 11-21-2011, 05:38 PM

Quote:

Originally Posted by JLambCWU

I second Scarz, just flew out LA to check out the ZL1 in person for the first time. I didn't like the orange stitching in the online pictures, and I REALLY do NOT like how it looks in person. I would pay a premium for grey stitching to match Ashen grey exterior.

With my blacked out windows,nobody will see the stitching !

Although imo yellow and red look good together.Ill use my bike as an example

Z4me · 11-21-2011, 07:02 PM

I guese they had to make a choice as to what color to make the stitching. Probably used a panel of people like they did the colors. Just wear some shades, crank up the music and enjoy the view of passing mustangs to your left and right of you.

mmarx82 · 11-21-2011, 07:21 PM

Quote:

Originally Posted by Z4me

I guese they hadto make a choice as to what color to make the stitching. Probably used a panel of people like they did the colors. Just wear some shades, crank up the music and enjoy the view of passing mustangs to your left and right of you.

There will be no mustangs passing me left and right...

just messing with you, I know what you meant.

Z4me · 11-21-2011, 08:11 PM

Quote:

Originally Posted by mmarx82

There will be no mustangs passing me left and right...

just messing with you, I know what you meant.

11-21-2011, 12:57 PM	#1
Scarrzz No Fear-No Limits- Camaro Drives: '13 ZL1 or Suzuki Hayabusa Join Date: Jul 2009 Location: Louisiana, CO, GA, TX, etc. Posts: 2,033 View My Garage	Interior Stitching Color Choice. . Does anyone think there might be a choice of color on the interior stitching - before the cut off date for order changes? Red is great on a red car. OK on black, gray, or white, but not so much on blue or orange. With instant communication, how much would it cost to get them to change thread color on some of the seats? I would pay to have matching color. Considering the current palate, I think a choice of red, white, blue, and orange would suffice. While we're on the subject of color matching, engine cover too, plz. ------------ Edit, accidental omission of Yellow, which would be iffy with red stitching, depending on the customer's taste. __________________ . __________________________________ ................................................The Faithful are Watching. Last edited by Scarrzz; 11-22-2011 at 09:54 AM.

11-21-2011, 01:06 PM	#3
IOMZL1 Drives: 2015 Z/28 \| 2017 Viper ACR Extreme Join Date: Aug 2011 Location: Brownsburg Posts: 1,009	I second everything stated by Scarrzz. I'm ready to pay for these features. __________________ dougshelbyengineering.com www.facebook.com/dougshelbyengineering www.instagram.com/dougshelbyengineering

11-21-2011, 01:07 PM	#4
Shurenuff Drives: 2002 Nissan Altima Join Date: Jul 2008 Location: Chicago, IL Posts: 2,048	I agree with you but I think it's going to be what you see is what you get. I don't think the red accent color will look too bad on the IBM. After all red is going to be on the ZL1 badging, and everyone knows there's no shortage of those on the exterior So you'll match there. I think the two colors where it'll really clash is IOM and yellow. I personally like it, but I'm getting a more neutral color in AGM. __________________ Factory Badassery

11-21-2011, 02:15 PM	#8
hognutz Drives: 2013 ZL1 Join Date: Oct 2011 Location: tangent or Posts: 2,984	Nope in chevy's world the higher end cars seem to get less options. It is to keep the cost down but I have always wonder by how much? 54,995 is base without interior option what would base be if they had gray or tan as options??? they somehow keep the base corvette cost competitive with interior choices. __________________ shopping for 2017+1le or zl1 2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned

11-21-2011, 03:33 PM	#10
1BADZL1 THE CAMARO KING Drives: 2012 Camaro ZL1 on order #PZSD7S Join Date: Aug 2006 Location: Out Somewhere Driving My 'BADZL1' Posts: 2,284	www.notgonnahappen.com __________________ 2012 Camaro ZL1 Car Name: Bruce ZL1, LSA, MN6/MG9, DSX, RTQ, VR, Current Status: 2030 1000 Initial Order 11/11/2011 Chevyland 1100 Order accepted at dealer: 11/11/2011 - PZSD7S 2000 Order accepted by GM: 12/14/2011 3000 Accepted By Production Control: 00/00/2011 - TPW 00/00/2011 3100 Sequenced: 00/00/2011 3300 Scheduled For Production:0/0/2012 3400 Broadcast: 0/0/2012 3800 Produced: 0/0/2012 4000 Available To Ship: 0/0/2012 4200 Shipped: 0/0/2012 5000 Delivered To The Dealer: 0/0/2012 6000 Delivered To Customer:0/0/2012

11-21-2011, 01:06 PM	#2
closs2sx Drives: 1970 chevelle Join Date: Aug 2011 Location: Central NH Posts: 1,427	how bout an interior color choice as well

11-21-2011, 01:13 PM	#5
Shellza Where's my ZL1 Drives: F350 4X4, 2011 800 ETEC Join Date: Nov 2011 Location: ALASKA Posts: 2	My first post so forgive me. Have a copy of my 1EY37 order, allocation group CAM, order # QBB---, just curious if this looks right for "first build" allocation?

11-21-2011, 02:27 PM	#9
JLambCWU JET JOCK Drives: 2013 AGM ZL-1, Dakota 4x4 Ext Cab Join Date: May 2011 Location: Salt Lake City, UT Posts: 66	I second Scarz, just flew out LA to check out the ZL1 in person for the first time. I didn't like the orange stitching in the online pictures, and I REALLY do NOT like how it looks in person. I would pay a premium for grey stitching to match Ashen grey exterior.

11-21-2011, 07:02 PM	#12
Z4me Drives: 2013 ZL1 IOM Vin #169 Join Date: Jan 2011 Location: Maryland Posts: 1,953	I guese they had to make a choice as to what color to make the stitching. Probably used a panel of people like they did the colors. Just wear some shades, crank up the music and enjoy the view of passing mustangs to your left and right of you. __________________ Last edited by Z4me; 11-22-2011 at 01:26 PM.