Professionally Painted Quad Exhaust Rear Diffuser - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sour DeeZ · 01-24-2012, 06:09 PM

NEW PRICE

I purchased this diffuser from a sponsor here on the forum. After receiving it, I had it professionally shaped, and smoothed more. As well as a professional paint job. I have a 3" exhaust and cannot find the right pair of dual exhaust tips with a 3" inlet of my liking, so I have no use for this. It has been wrapped up since I picked it up. It has never even been put on the car.

I am asking for $450, shipped. Legitimate trades welcome.

Needs to sell

Thanks

ArmoSS · 01-24-2012, 10:51 PM

Just curious...why so much? Because of the paint? Generally the main forum sponsor on here that makes these sells them for $350 unused.

Infern0 · 01-25-2012, 01:22 PM

3" inlet:

http://banditexhaust.com/catalog/sta...l?currency=USD

Sour DeeZ · 01-25-2012, 03:07 PM

Quote:

Originally Posted by ArmoSS

Just curious...why so much? Because of the paint? Generally the main forum sponsor on here that makes these sells them for $350 unused.

When I ordered it, I asked for it to be painted, for extra. When it arrived at my door, the bumper was very unshaped, and looked it unfinished. While the paint was spray paint. I had to bring it to my shop, and have the sand it down, reshape it so it looks factory, and prime,paint etc. I'm not bashing the vendor, I never even made a post about it.

The diffuser looks excellent now. I am open to offers.

Sour DeeZ · 01-25-2012, 03:10 PM

Quote:

Originally Posted by Infern0

3" inlet:

http://banditexhaust.com/catalog/sta...l?currency=USD

I should have been more specific. I am not looking for angle cut, or for it to have a companies logo that I do not have.

Thanks

Sour DeeZ · 01-25-2012, 07:19 PM

bump

Sour DeeZ · 01-26-2012, 07:49 PM

bump

FINALLYSATISFIED · 01-26-2012, 10:24 PM

I would have had to see it on a Camaro. The 2 exhaust holes look way too big even for quad tips.

mrkout · 01-27-2012, 12:09 AM

Quote:

Originally Posted by MY1STCAMAR0

I would have had to see it on a Camaro. The 2 exhaust holes look way too big even for quad tips.

the diffuser sits at about a 45 degree angle when its on the car so they will look much smaller when installed.
check out this thread (page 2), there is a guys thats running this diffuser with the stock exhaust to give an idea of how large the holes are

http://www.camaro5.com/forums/showth...iffuser&page=2

Just trying to help

Free midnight bump! for the OP

Sour DeeZ · 01-27-2012, 03:33 PM

Sour DeeZ · 01-28-2012, 01:13 PM

Needs to go!

Sour DeeZ · 01-31-2012, 08:22 PM

new price

Sour DeeZ · 02-01-2012, 07:22 AM

bumpo

srzaver · 02-01-2012, 08:28 AM

I have 2 diffusers right now, one for a v8 and one for v6 if you want either for a trade? I also have a quad one thats on my car currently, and im interested in the one youre selling. PM me?

01-24-2012, 06:09 PM	#1
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	Professionally Painted Quad Exhaust Rear Diffuser NEW PRICE I purchased this diffuser from a sponsor here on the forum. After receiving it, I had it professionally shaped, and smoothed more. As well as a professional paint job. I have a 3" exhaust and cannot find the right pair of dual exhaust tips with a 3" inlet of my liking, so I have no use for this. It has been wrapped up since I picked it up. It has never even been put on the car. I am asking for $450, shipped. Legitimate trades welcome. Needs to sell Thanks __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6. Last edited by Sour DeeZ; 02-12-2012 at 06:43 AM.

01-25-2012, 01:22 PM	#3
Infern0 Bring It Drives: In Between Join Date: Sep 2009 Location: San Antonio, TX Posts: 2,929 View My Garage	3" inlet: http://banditexhaust.com/catalog/sta...l?currency=USD __________________ 2017 Camaro ZL1 M6 - Everything but the sunroof - Sold 2010 Camaro SS - 650RWHP Daily Driver - Traded

01-25-2012, 07:19 PM	#6
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	bump __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

01-26-2012, 07:49 PM	#7
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	bump __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

01-27-2012, 03:33 PM	#10
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	__________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

01-24-2012, 10:51 PM	#2
ArmoSS Drives: 2011 Camaro SS Join Date: Feb 2011 Location: Burbank, CA Posts: 506	Just curious...why so much? Because of the paint? Generally the main forum sponsor on here that makes these sells them for $350 unused.

01-26-2012, 10:24 PM	#8
FINALLYSATISFIED Est.1775 Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009 Location: SoCal Posts: 5,502	I would have had to see it on a Camaro. The 2 exhaust holes look way too big even for quad tips.

01-28-2012, 01:13 PM	#11
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	Needs to go! __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

01-31-2012, 08:22 PM	#12
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	new price __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

02-01-2012, 07:22 AM	#13
Sour DeeZ Drives: 2011 IOM 2SS RS M6 Join Date: Feb 2010 Location: SoCal Posts: 692	bumpo __________________ 2011 SS/RS IOM M6 --- Kooks 1 7/8" Long Tube Headers Coated, Kooks 3" HFC, Kooks X-pipe, Kooks 3" Cat-back, Cold Air Inductions CAI, Custom Quad Exhaust & Diffuser, Custom Tuned at Jannetty Racing. (2) 10" JL Audio w6's. Rockford Fosgate Power T500-1. Cache COE6.

02-01-2012, 08:28 AM	#14
srzaver Drives: 2010 Black Camaro RS Join Date: Oct 2010 Location: Sugar Land, TX Posts: 26 View My Garage	I have 2 diffusers right now, one for a v8 and one for v6 if you want either for a trade? I also have a quad one thats on my car currently, and im interested in the one youre selling. PM me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	66	04-22-2024 11:41 AM
DIY : Rear Diffuser Removal	AUS10BMX	Camaro DIY & HOW-TO instructions & discussions	107	09-17-2018 08:14 PM
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Quad exhaust tip diffuser?	UNDsioux	Cosmetics and Lighting Modification Discussions	3	09-14-2011 12:11 AM
REAR DIFFUSER EXHAUST......	2010_5thgen	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	44	01-31-2011 01:41 PM