MRT V2.0 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jayscamaro · 03-15-2012, 03:22 PM

hello guys im saving up for an MRT 2.0 exhaust i just wanted to know how much does it cost to install also i had a question about body kit, by my high school there is quite a few amount of speed bumps. is there any options to avoid damage to my kit when i get one?

BowtieBelle · 03-15-2012, 03:25 PM

Quote:

Originally Posted by jayscamaro

hello guys im saving up for an MRT 2.0 exhaust i just wanted to know how much does it cost to install also i had a question about body kit, by my high school there is quite a few amount of speed bumps. is there any options to avoid damage to my kit when i get one?

A reputable shop should charge you no more than $50 to install the MRT; that's how much I was charged. It's just cutting off the old one and clamping on the new one. Comes with terrific, expensive band clamps like the ones we used to use on our race car. To get it welded may be a bit more. I wanted to do it myself, but it was cheaper to pay someone rather than buy a sawzall, etc.... and I had no lift!

I can't answer the question on the body kit because I don't have or want one-- but of course to each their own!

Enjoy!

jayscamaro · 03-15-2012, 03:27 PM

okay thanks for clearing that up for me. 50 bucks is not a bad price at all so the total project will run me about 550. nice. also does anyone know where sells the exhaust the cheapest?

BowtieBelle · 03-15-2012, 03:29 PM

Quote:

Originally Posted by jayscamaro

okay thanks for clearing that up for me. 50 bucks is not a bad price at all so the total project will run me about 550. nice. also does anyone know where sells the exhaust the cheapest?

Auto Agenda! Check the sponsors classified marketplace. They got it to me SO fast, I was blown away-- and it was a GREAT price, best I found! AutoAgenda.com

jayscamaro · 03-15-2012, 03:33 PM

okay thanks for fast replies lol have a good day

Schmidty · 03-15-2012, 03:40 PM

I paid closer to $100 in California...but everything is more expensive here. Check out the Vendor sponsored classifieds as well. They have a couple good deals on the MRTv2 with CAI and scoop if you're interested. Nice choice by the way!

deryk · 03-15-2012, 03:44 PM

I ordered mine from Auto Agenda as well. Great customer service, and free shipping too! Don't forget those coupon codes!

austin · 03-15-2012, 05:09 PM

Quote:

Originally Posted by deryk

I ordered mine from Auto Agenda as well. Great customer service, and free shipping too! Don't forget those coupon codes!

Do you have a current coupon code for them?

deryk · 03-15-2012, 05:15 PM

Quote:

Originally Posted by austin

Do you have a current coupon code for them?

I believe it was "MRT" or some variant of that. I found it on these forums and it still worked when I tried it yesterday.

Dolla Bill · 03-15-2012, 06:06 PM

Good choice on the MRT 2.0. Just got mine installed this past tuesday and holy S**T does it sound amazing! I live in Chicago though and paid $80, but that included the guy doing some spot welding to minimize movement over time. Plus I found it much nicer having someone do it instead of me messing it up

Dolla Bill · 03-15-2012, 06:09 PM

You don't need to get it welded though, the clamps work just fine. However there were some gaps by the clamps when my guy did mine, that's where the welding came into play just to be safe. Did not pay anymore for the welding. $50-80 sounds fair

Apex Motorsports · 03-15-2012, 07:05 PM

Just a heads up, Apex just added MRT.

HULK10 · 03-15-2012, 08:32 PM

Whats the price for the MRT at Apex???

Apex Motorsports · 03-15-2012, 08:38 PM

Quote:

Originally Posted by HULK10

Whats the price for the MRT at Apex???

PMed.

03-15-2012, 03:22 PM	#1
jayscamaro Banned Drives: 2012 camaro 1LT Join Date: Nov 2011 Location: queens new york Posts: 349	MRT V2.0 hello guys im saving up for an MRT 2.0 exhaust i just wanted to know how much does it cost to install also i had a question about body kit, by my high school there is quite a few amount of speed bumps. is there any options to avoid damage to my kit when i get one?

03-15-2012, 03:40 PM	#6
Schmidty Facebook.com/SoCalCamaro5 Drives: 2011 CGM 2SS/RS Join Date: May 2011 Location: San Diego Posts: 1,133	I paid closer to $100 in California...but everything is more expensive here. Check out the Vendor sponsored classifieds as well. They have a couple good deals on the MRTv2 with CAI and scoop if you're interested. Nice choice by the way! __________________

03-15-2012, 03:44 PM	#7
deryk Cruisin the Golden State! Drives: 2011 Victory Red Camaro Convertible Join Date: Mar 2012 Location: Pleasanton, CA Posts: 108	I ordered mine from Auto Agenda as well. Great customer service, and free shipping too! Don't forget those coupon codes! __________________

03-15-2012, 08:32 PM	#13
HULK10 Driving like a Maniac??? Drives: 2010 SGM Camaro Join Date: Sep 2011 Location: Windy City IL Posts: 136	Whats the price for the MRT at Apex??? __________________ "SHE" hates my CAMARO

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MRT V1.0 or V2.0 Say you what will it be	Ir0nM4n	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	47	05-08-2013 05:20 PM
MRT 3.6L \| BLACK FRIDAY SALE to ÜBER CYBER MONDAY \| MRT Axle-Back V1.0 & MRT V2.0	AutoAgenda	V6 Bolt-Ons & Tunes	12	11-30-2011 03:37 PM
MRT V2.0 with different tips?	XRIDER105	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	23	06-29-2011 10:43 AM
MRT Exhaust v2.0 burning my bodykit	smokay	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	7	02-08-2011 05:15 PM
ARH Longtubes,Trifecta Tune and MRT V2.0	Blade	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	36	05-01-2010 06:11 PM

03-15-2012, 03:27 PM	#3
jayscamaro Banned Drives: 2012 camaro 1LT Join Date: Nov 2011 Location: queens new york Posts: 349	okay thanks for clearing that up for me. 50 bucks is not a bad price at all so the total project will run me about 550. nice. also does anyone know where sells the exhaust the cheapest?

03-15-2012, 03:33 PM	#5
jayscamaro Banned Drives: 2012 camaro 1LT Join Date: Nov 2011 Location: queens new york Posts: 349	okay thanks for fast replies lol have a good day

03-15-2012, 06:06 PM	#10
Dolla Bill Drives: 2010 Camaro 1LT Join Date: Mar 2012 Location: Chicago Posts: 24	Good choice on the MRT 2.0. Just got mine installed this past tuesday and holy S**T does it sound amazing! I live in Chicago though and paid $80, but that included the guy doing some spot welding to minimize movement over time. Plus I found it much nicer having someone do it instead of me messing it up

03-15-2012, 06:09 PM	#11
Dolla Bill Drives: 2010 Camaro 1LT Join Date: Mar 2012 Location: Chicago Posts: 24	You don't need to get it welded though, the clamps work just fine. However there were some gaps by the clamps when my guy did mine, that's where the welding came into play just to be safe. Did not pay anymore for the welding. $50-80 sounds fair

03-15-2012, 07:05 PM	#12
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Just a heads up, Apex just added MRT.