Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - > Members Area > Off-topic Discussions

Thread Tools
Old 04-17-2012, 09:24 PM   #1

Caddyroger's Avatar
Drives: 2011 RJT Camaro LT2 RS auto shift
Join Date: Dec 2011
Location: Washington state
Posts: 1,861
Increasing voltage

I do not know if this belongs here or elsewhere. I installed a electronic oil pressure gauge today. I used the factory oil pressue signal wire because the way the Camaro it would be pain to install the after market sending. This is where it gets not a camaro.
The pressure is reading 105 at idle, 150 at about 1700 rpm.
I put a 460k resistor in the sender wire. It went to 150 at idle. This seems like it need more voltage to decrease pressure reading.
Now what need to know is there a electronic way to increase the voltage with the increase of oil pressure.
If there are a web site where I can research this let me know.
Caddyroger is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:32 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.