05-03-2012, 09:59 AM | #1 |
Cantafordit
Drives: 2010 2SS/RS Join Date: Mar 2010
Location: Picayune, MS/Covington, LA
Posts: 282
|
Manual Bump Shifter
Is there such an animal for the 2010 Camaro
__________________
Down, But Not Out 610.7 RWHP/553.8 RWTQ
|
05-03-2012, 10:13 AM | #2 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
You mean like paddle shifters?
|
05-03-2012, 10:54 AM | #3 |
Cantafordit
Drives: 2010 2SS/RS Join Date: Mar 2010
Location: Picayune, MS/Covington, LA
Posts: 282
|
No. A straight line bump shifter that mounts where the original shifter goes...FOR MANUAL TRANSMISSIONS
__________________
Down, But Not Out 610.7 RWHP/553.8 RWTQ
|
05-03-2012, 10:56 AM | #4 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
sequential shifter?
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
05-03-2012, 11:36 AM | #5 |
Cantafordit
Drives: 2010 2SS/RS Join Date: Mar 2010
Location: Picayune, MS/Covington, LA
Posts: 282
|
Yes that is what I am looking for
__________________
Down, But Not Out 610.7 RWHP/553.8 RWTQ
|
05-03-2012, 11:41 AM | #6 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Im guessing your looking for no-lift shifting? There are kits that mimic the sequential shifters but a full conversion is going to get expensive.
Holinger makes the SG3 http://www.holinger.com.au/sg3.php
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
|
|
|