Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -
sjm autoprod
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - > Other Generations > 4th Generation Camaros > 4th Gen Marketplace

Thread Tools
Old 05-20-2012, 11:30 PM   #1
pincushin3819's Avatar
Drives: 11 AGP TT SS, 14 ECS C7
Join Date: May 2012
Location: Anderson, SC
Posts: 352
TSP 418 LS2/L92 conversion

LS2/L92 conversion package: LS2 front cover w/cam sensor, LS2 valley cover, LS2 single roller timing set, cam & knock sensor extension harness, LS2 lifter trays, GM L92 aluminum block, 4.065 factory bore size, Eagle LS1 4.00inch stroke crankshaft, 24x tooth reluctor, Eagle LS1 6.125 h-beam connecting rod set w/upgraded ARP 2000 rod bolts, 2.100 crank journal, .927 wrist pin, Dimond Racing 418 L92 stroker piston set, 4.080 bore, 4.000 stroke, 6.125 rod length, flat top -4cc valve reliefs, setup for L92 chamber, TSP total seal ring set, 4.080"+.005", 1.5mm plasma moly top, 1.5mm napier 2nd, camshaft bearing set for LS2 & 2nd gen LS1 engine block, 8 Clevite LS1 h-rod bearing, Clevite h main bearing set, full block work & preparation, vat block, line bore, install new cam bearings, bore/hone w/torque plate, blalance rotating assy., line hone, 10 GM bolt LS2 side main cap & rear cover, GM LS1 oil restrictor, GM LS1 oil galley core plug, GM LS1 large coolant plug, 3 GM engine block small coolant plug, GM engine oil supplement, assemble short-block, Precision Race Components CNC ported L92 heads, fully assembled w/PRC dual valve spring kit & hollow stem 2,16/1.59 valves, Comp cams custom camshaft, TSP chromemoly 7.40 pushrods, 2 cometic L92/LS3 4.085 bore .040 thickness cylinder head gasket, 2 GM cylinder head bolts, 4 GM LS1 lifer tray bolts, GM camshaft retainer plate, 4 GM cam retainer plate bolt, GM LS1/LS2 rear main seal housing gasket, GM LS2 timming cover gasket, GM LS2 valley cover gasket, GM oil pump o-ring, GM LS1 balancer pulley bolt, 2 LS1 exhaust manifold gasket, GM LS1 oil pan gasket, 2 GM LS1 water pump gasket, GM LSX rear main seal, GM LS1 front crankshaft seal, 4 GM engine block dowel pin, 8 GM L92 intake rocker arm 1.7:1 ratio, 8 GM Exhaust rocker arm 1.7:1, 16 GM LS1 rocker arm bolt, 2 GM L92 rocker arm pedestal, assemble long block, GM bare L76 intake manifold, GM L76 fuel rail, 8 FAST fuel injectors, 4 GM L76 fuel rail bolt, PTM 92mm throttle body, 10 GM L76 intake manifold bolt, GM L76 throttle cable bracket manifold.
Asking price $10,000 + shipping
pincushin3819 is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:33 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.