05-30-2012, 09:02 AM | #1 |
Drives: 2010 v6 black ls Join Date: Apr 2012
Location: vermont
Posts: 26
|
any of these parts being made for the camaro
1. v6 camshafts
2. throttle body spacer anyone help thanks |
05-30-2012, 09:08 AM | #2 |
Engineer in Training
Drives: IBM 2010 Camaro LS Join Date: Nov 2011
Location: Alabama
Posts: 292
|
Cams are in the works, and the TB spacers exist, but everyone says that they're a waaste of money. I'd try a porter TB, or some of the manifold insulators.
__________________
K&N Aircharger CAI, BBK LT's, VMAX black ICE, Trifecta tuned
|
06-02-2012, 08:54 AM | #3 |
Drives: SRT Yugo GT Super Sport with Manual Join Date: Mar 2012
Location: va
Posts: 1,536
|
Probably dont even need a cam unless you are racing and dont care about voiding your warranty? Currently there are enough bolt on stuff to get you 360hp or more at the crank/300+ rwhp and thats without a tune or turbos.
|
06-02-2012, 08:21 PM | #4 |
Drives: 2011 Camaro LS Join Date: Feb 2011
Location: Southern California
Posts: 2,920
|
wanna make a list?
__________________
|
06-02-2012, 10:06 PM | #5 |
Slow v6
|
Mods: Note all of the hp numbers are from stock, they don't add up!
Exhaust: Cat/Axle= no Hp gain, only for sound Headers: Long tube= 20hp avg / Shorty= 10hp Avg Tune" Hypertech=6hp/ Trifecta=12 off peak but 20 in mid range Ported Tb= 6hp gain but no lag anymore Insulators= Blackice= 15/20hp / Mace 25mm= 20hp but more torque Cai= Varamra/Injen Lt most gains of 10/15hp. pm if you need more help, and there are too many mods to list. I just got tired! Here ya go! http://www.camaro5.com/forums/showthread.php?t=16893
__________________
Full bolt on 2lt/Rs. Any questions? always a pm away!
Obx/Mace/Rx/Mrt/Vararam/Bcam/4.11 Gears/SS Brakes USAF. Stationed in TX |
06-02-2012, 10:56 PM | #6 | |
Drives: SRT Yugo GT Super Sport with Manual Join Date: Mar 2012
Location: va
Posts: 1,536
|
Quote:
|
|
|
|
|
|