08-31-2012, 07:01 PM | #1 |
|
CENTER CONSOLE
Anyone ever had the center console embroidered ? easy? hard to do? thanks
|
08-31-2012, 07:08 PM | #2 |
Drives: 2012 45 Anniversary Vert Join Date: Apr 2012
Location: atlanta
Posts: 2,511
|
I find myself curious on how you embroider plastic? Is it different than cloth or leather or the same process?
|
08-31-2012, 07:15 PM | #3 |
Drives: 2012 2SS/RS Convertible Join Date: Aug 2012
Location: SoCal Baby...
Posts: 2,530
|
probably have to have it wrapped first, one would think..
|
08-31-2012, 07:16 PM | #4 |
|
i may have not splained myself,,,its a leather center console that i am referring to.
|
08-31-2012, 07:26 PM | #5 |
I would like to actually embroider my center console as well. I have the black leather and would like to embroider the SS in orange. I'm going to look into it. If I have luck, I'll let you know!
|
|
08-31-2012, 10:39 PM | #6 |
Drives: 2012 45 Anniversary Vert Join Date: Apr 2012
Location: atlanta
Posts: 2,511
|
|
08-31-2012, 10:44 PM | #7 |
|
maybe a dremel tool rhyder..?
|
08-31-2012, 11:20 PM | #8 |
Drives: '12 IOM LT 'vert Join Date: Jun 2011
Location: NEPA
Posts: 646
|
I still don't know what the hell he's talking about.
|
09-02-2012, 01:29 PM | #9 |
Drives: 2012 45 Anniversary Vert Join Date: Apr 2012
Location: atlanta
Posts: 2,511
|
I was imagining something like the 45th embrodery on the seats, but on the side panels, that was the way I took it.
The dremmel tool got me to thinking, would there be a place that could maybe etch into it designs? |
09-02-2012, 10:00 PM | #10 |
Drives: 2012 2SS/RS Convertible Join Date: Aug 2012
Location: SoCal Baby...
Posts: 2,530
|
|
09-27-2012, 04:02 PM | #11 |
|
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
09-27-2012, 04:12 PM | #12 |
it's hers...
Drives: 2011 Camaro 2SS/RS Convertible Join Date: Jun 2012
Location: katy, tx
Posts: 1,202
|
Look up Lupe on here, he has a guy that covers the center console in ultra leather, the sides too.
|
10-23-2012, 09:52 AM | #13 |
Drives: Black RS2SS Join Date: Feb 2012
Location: Columbus Ga
Posts: 39
|
My wife has an embroidery machine and Im thinking of taking the leather off the console and embroidering the SS logo on it. Ill let you know how it goes, I may try this tonight
|
10-24-2012, 08:06 AM | #14 |
Drives: Black RS2SS Join Date: Feb 2012
Location: Columbus Ga
Posts: 39
|
Ok I spent quite a bit of time digitizeing this font and editing it to look like the SS logo, Please let me know what you think. I tested it out on a piece of pleather to do some tweaking as I go. I did unwrap my console lid and have the leather ready to embroider but want to make sure the font is right before I make a final attempt, I used green so that I could see the detail better but I will be going with a light grey/silver on my leather to match the car.
|
|
|
|
|