04-05-2013, 02:48 PM | #1 |
Drives: 2013 1LT Crystal Red/Beige Manual Join Date: Nov 2008
Location: Stoneham, MA
Posts: 735
|
2010-2013 Headlight Difference?
So back when I got my 2010 non-RS, I bought a pair of 2010 RS lights and an adapter harness. It worked great for three years. I pulled them out and just tried installing them in my 2013. All the connectors were right, it slid in there just as easy as in the 2010. But alas, they lights are not coming on. They are a simple adapter that goes between the factory connector and the connector on the light. Any ideas I can try now before I put it back together? The plugs are the same, so I figure the only thing that could have caused this, would be if they used the same connectors on the 2013 ights but changed the pin outs, which seems unlikely????
|
04-05-2013, 03:20 PM | #2 |
Drives: 2013 1LT Crystal Red/Beige Manual Join Date: Nov 2008
Location: Stoneham, MA
Posts: 735
|
False alarm Internet! The e brake was killing the DRLs, which are regular low beam HIDs with this kit. Hence no lights. All good and look great.
|
|
|
|
|