You are browsing camaro5 
 |
|
04-22-2013, 12:03 AM
|
#1 |
 
Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013
Location: San Antonio, TX
Posts: 628
|
Starting Problem
The problem I'm having is starting after just a few miles of driving. Cold starts, no problem. Hot starts after 10 or more miles of driving, no problem. Yesterday I started the car (2SS/RS, Manual trans) for the first time that day and drove just a few miles to the gas station for a drink. I came out and cranked it up and the car sputters and spits for a few seconds then returns to a normal idle. It's done this a few times the past month since I added my CAI cold air intake. The only other mod I have is a muffler delete. Any ideas?.
__________________
 U.S. Army Retired |
|
|
|
04-22-2013, 12:21 AM
|
#2 |
|
Account Suspended
Drives: 2010 SS 426 V8 M/T Join Date: Aug 2012
Location: Scottsdale AZ
Posts: 1,376
|
No gas ?
|
|
|
|
|
04-22-2013, 02:01 AM
|
#3 |
 
Drives: 2011 LT Black Join Date: Nov 2011
Location: Calgary, Alberta, Canada
Posts: 406
|
Bad gas maybe.
|
|
|
|
|
04-22-2013, 02:58 AM
|
#4 |
    |
Prolly that time again to cleaner the injectors.
|
|
|
|
|
04-22-2013, 07:19 AM
|
#5 |
|
Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013
Location: San Antonio, TX
Posts: 628
|
Plenty of gas in the tank and I only run 93 octane. Any recommendation on injector cleaner? I've heard good stuff about BG injector cleaning service.
__________________
U.S. Army Retired |
|
|
|
|
04-22-2013, 07:21 AM
|
#6 |
Drives: 2011 Black SS M6 Join Date: Oct 2010
Location: Harpers Ferry, WV
Posts: 1,116
|
If the CIA has an oiled filter, I'd check the MAF sensor. If the MAF gets coated in oil, the car runs/starts like crap.
|
|
|
|
|
04-22-2013, 07:30 AM
|
#7 | |
|
Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013
Location: San Antonio, TX
Posts: 628
|
Quote:
__________________
U.S. Army Retired |
|
|
|
|
|
04-22-2013, 07:45 AM
|
#8 |
   
Drives: ABM SS2/RS M6 Join Date: Apr 2011
Location: Lafayette,LA
Posts: 2,306
 |
Maybe a little carb cleaner on the MAF? Then let it sit and dry thoroughly. Might help.
__________________
 Life is short, drive it like you stole it!  |
|
|
|
|
04-22-2013, 08:28 PM
|
#9 |
|
Account Suspended
|
MAF is cleanable, they sale a cleaner specifically for MAF sensors at auto Stores,
|
|
|
|
|
04-22-2013, 10:10 PM
|
#10 |
 
Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011
Location: 87114
Posts: 3,501
|
Do you let the injectors prime prior to cranking it?
__________________
Power is worthless without control. The 2nd protects the 1st.
BMR sub frame brace, BMR tunnel brace, LSR sways, LSR CM ca & tl, Sphon ExD el, GM tower brace, Megan EZ Streets, Goodridge Stainless Steel Braided brake lines, PowerStop D/S rotors & pads, Doug Thorty Ceramic Shorties, Magnaflow x-pipe, MRT V2.0, KICKER PowerStage sub & amp, Infinity speakers & tweeters, Viteese Throttle Controller, Viteese Paddle Shifters, ACS T2 Splitter, ACS T2 Ports/Quad LED lights, VDI kit, Havoc diffuser, IPF ECU/TRANS tuned, IPF/KPE Supercharged. 364RWHP/297RWTQ |
|
|
|
|
04-23-2013, 06:48 AM
|
#11 | |
|
Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013
Location: San Antonio, TX
Posts: 628
|
Quote:
__________________
U.S. Army Retired |
|
|
|
|
|
04-23-2013, 09:31 AM
|
#12 |
|
Drives: 2011 Race Red GT500 w/ SVT Perf Pkg Join Date: Mar 2009
Location: eastern CO
Posts: 578
|
If after cleaning the MAF sensor, and there is no change, I would try reinstalling the original intake, and see if the sputtering goes away. That might be the fastest way to help diagnose the trouble.
|
|
|
|
|
04-23-2013, 09:51 AM
|
#13 |
  
Drives: 2012 ZL1 - #670 Join Date: Jun 2009
Location: Seminole, Fl.
Posts: 8,009
|
What intake did you put on, K&N is known for issues.
__________________
 |
|
|
|
|
04-23-2013, 10:31 AM
|
#14 |
|
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,046
|
Stupid question , but did you re-install the MAF with the arrow pointing in the right direction?
|
|
|
|
|
|
|
|
 |
|
|
