07-25-2013, 07:11 PM | #15 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
Wish I had bought these.
|
07-25-2013, 07:59 PM | #16 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
|
07-31-2013, 12:42 AM | #17 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
Bump!
|
07-31-2013, 02:14 AM | #18 |
Drives: 2013 Camaro 1SS Join Date: Jun 2013
Location: Waterloo
Posts: 41
|
Where in IL are you located? I'll be driving down to Chicago towards the end of August. Would I be able to pick these up if they're still available?
|
07-31-2013, 10:38 AM | #19 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
I'm located in Libertyville, IL, which is about 40 minutes northwest of Chicago. If these are still available, you would be able to pick them up.
|
08-05-2013, 09:04 AM | #20 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
Bump.
These are still available. |
08-09-2013, 08:49 AM | #21 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
bump
|
08-09-2013, 01:57 PM | #22 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
It's been 25 days since I listed these wheels, and somehow, they have not sold yet. They are taking up too much space, and I want them out of my garage.
As such, I have lowered the price to $1,375 shipped. $1,375 gets you a set of brand new, unopened, untouched gloss black Forgestar CF5V's in a small fraction of the time it would take from any vendor. Somebody take advantage of this. |
08-09-2013, 05:09 PM | #23 |
SparkyDL75
|
PM sent.
Could you verify the offsets and weights of these wheels? I am running Pedders XA coilovers and ZL1 upgrade rear sway bars. I want to make sure nothing will rub.
__________________
2010 CGM 2SS/RS M6 LS3 Black/Gray
Exterior American Racing BLVD Black w/Machined(20x10) Mickey Thompson Street Comps(275/40 & 305/35) Suspension Pedders Pace Car Pkg w/ZL1 Upgrade; Pedders Upper & Lower Control Arm, Steering, & Differential Mount Bushings; Pedders SS Brake Lines; Pedders Dual Bearing Camber Plates; ZL1 Toe Link; Hawk Performance Ceramic brake pads Drivetrain Maggie2300(8psi-3.4pulley); CompCam; 85lb injectors; ZL1 fuel pump; ZR1 MAP; Centerforce DYAD Twin Disc clutch; Stainless Works LT headers; QTP Cutouts; Rotofab intake; RX catch can; Mike Norris tune 643rwhp 598 rwtq |
08-09-2013, 10:57 PM | #24 | |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
Quote:
The front wheels have a +35 offset, and the rears have a +39 offset. I don't have the weights of these particular sizes, but I know that the 19x8.5 size of this wheel weighs 19.8lbs. The offsets were chosen by Forgestar with the Pedders coilovers in mind (I sold mine). They should clear everything. |
|
08-10-2013, 07:37 AM | #25 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
Better turn in with reduced weight, less stress on the power steering pump and rack as well as the wheel bearings and the list goes on and on. No wonder GM went to 19" for the Z28. 19x11 weighs 24lbs and 19x10 weighs 23.7lbs. On a UPS scale. Nice indeed and looks freaking killer on my car, even better than the TSW Nurbs. Looks like black jewelry.
Last edited by L99CAMA2011; 08-24-2013 at 04:46 PM. |
08-10-2013, 07:50 AM | #26 |
Quit being a pu$$y
|
Too bad it's not a square set up.
__________________
|
08-13-2013, 08:36 AM | #27 |
Drives: none Join Date: Jan 2013
Location: none
Posts: 81
|
Bump.
|
08-14-2013, 05:52 PM | #28 |
Supercharged LSX
Drives: 2011 2SS/RS Black/Carbon Fiber Join Date: Dec 2010
Location: City of Angels
Posts: 6,741
|
Let me see if I get my 22" sold and ill jump on these for track wheels.
__________________
|
|
|
|
|