04-04-2015, 09:29 AM | #1 |
Drives: 2015 Camaro SS/RS Convertible 6M Join Date: Mar 2015
Location: Toronto Canada (GTA)
Posts: 8
|
2014/15 RS front end de-chrome
Honestly, the refresh didn't impress me.
Although at this point I'm living with it (will be soon , production date Apr/13/15) The new front fascia - actually liking now New tail lights - Meh Chrome strip on the RS - why would they take parts of a '76 Plymouth and install them on the Camaro The chrome was almost a deal breaker for me. For real! My sales guy suggested carbon fiber tape. Anyone with other suggestions? If I'm flogged a dead horse - I apologize |
04-05-2015, 12:22 AM | #2 |
Drives: 2014 Chevy Camaro 2SS Join Date: Sep 2014
Location: Atlanta, Georgia
Posts: 324
|
I have removed my Chrome on mine when I replaced the Upper Grille with the Z/28 Grille and flotie. I also removed the ones over the Headlights, but you will have a slight hole where the chrome snaps into the bumper cover. I simple used some Matte Black Vinyl Cut to the indent under the headlight to do two things, hide the clip hole and give the Headlights a little brake in the solid gloss black.
__________________
G5carbon.com-SS Carbon fiber Trunk Filler Panels**Carbon fiber Heat Extractor **Z/28 Carbon Fiber Spoiler (Comming Soon)**Z/28 Carbon Fiber Rear Defuser (Comming Soon)**SS Carbon Fiber Lower Grill (Coming Soon)**Z/28 Carbon fiber Side Skirts (Coming soon)**SS Carbon fiber Cooling Plate (Coming Soon)**Camber/Caster Plates (Coming Soon)
Westcoastcamaros.com-Carbon Fiber Engine Cover (Ordered) |
04-05-2015, 10:54 AM | #3 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
I plastiddiped mine matte black by myself, wasn't hard at all.
|
04-05-2015, 11:09 AM | #4 |
Drives: 2010 Camaro 2SS/RS Join Date: Oct 2013
Location: Oxnard California
Posts: 83
|
plasti dip i did that with my chome tail light bezel on my 2010 and it works great had it for 2 years already and hasnt come off
|
04-05-2015, 01:20 PM | #5 |
Drives: 2015 Camaro SS/RS Convertible 6M Join Date: Mar 2015
Location: Toronto Canada (GTA)
Posts: 8
|
did you remove the trim or just paint it on?
|
04-05-2015, 01:24 PM | #6 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
|
04-05-2015, 01:44 PM | #7 |
|
I used black out tape, sold at most auto parts stores. Took about 30 minutes and looks great ! No mess, no masking etc.
__________________
'14 1LE, Recaro, Cammed, Headers, Hi Flows, CAI, Tuned, 486 RWHP
https://www.youtube.com/watch?v=H57UfKCO0EY&feature=youtu.be |
04-05-2015, 04:07 PM | #8 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
No, I didn't take the chrome strip neither the front bumper, headlights etc off.. Just masked off the area to avoid overspraying, and then started plastidipping it. After 5-6 coats and 30-45 mins to have it completely dry (easier to peel), I removed the tapes and everything, and started with the peeling. And there is it.
|
|
|
Thread Tools | |
|
|