dash and door fit.

2SSRS@Gen5diy · 02-03-2016, 07:28 PM

Any one have a bad fit with the dash and doors? here is my drivers and passenger let me know what your looks like.

suzook · 02-03-2016, 09:09 PM

Mines not as bad as your drivers side, but it definitely not perfect. Gm has issues with the dash and doors lining up. It is the same on my wife's 2014 impala.

Sledgehammer70 · 02-03-2016, 10:37 PM

My passenger side is perfect, driver side has a gap.

Driski · 02-04-2016, 04:14 AM

I will certainly look for this when my car comes in. Is this something the dealer can and should adjust or will they only screw it up? I know I need to go over the car with a fine tooth comb... would you not accept delivery for something like this?

laynlo15 · 02-04-2016, 05:38 AM

I didn't really look at mine, I will when it gets back from the tint shop

2SSRS@Gen5diy · 02-04-2016, 08:00 AM

Quote:

Originally Posted by Driski

I will certainly look for this when my car comes in. Is this something the dealer can and should adjust or will they only screw it up? I know I need to go over the car with a fine tooth comb... would you not accept delivery for something like this?

Its up to you what you can live with, hope dealer can fix this, going to drop car off on Monday for that and the not going over 85MPH.

leadfoot93 · 02-04-2016, 09:16 AM

Quote:

Originally Posted by Sledgehammer70

My passenger side is perfect, driver side has a gap.

Mine is the same but the drivers gap really isn't that big. I never noticed it until you posted that pic and I looked last night.

MikeyCamaro · 02-04-2016, 11:16 AM

Wow. Are the pictures misleading? That gap between the front dash pod and the sides looks almost big enough to lose a small cell phone in there! Almost looks like the dash pod wasn't made to fit the sides.

Mike

Glen e · 02-04-2016, 11:45 AM

Mine are ok, better than the 14 Vette.....

2SSRS@Gen5diy · 02-04-2016, 11:46 AM

Quote:

Originally Posted by MikeyCamaro

Wow. Are the pictures misleading? That gap between the front dash pod and the sides looks almost big enough to lose a small cell phone in there! Almost looks like the dash pod wasn't made to fit the sides.

Mike

Passenger side is .110, drivers is .326, or per there 1 mm panel fit clams, this one has a 5.75 mm differences, so yes you can but a small phone,

have a friend with a car built one week newer then this car and that panel fit is grate, but the front door rubes on the fender.

suzook · 02-04-2016, 01:26 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Passenger side is .110, drivers is .326, or per there 1 mm panel fit clams, this one has a 5.75 mm differences, so yes you can but a small phone,

have a friend with a car built one week newer then this car and that panel fit is grate, but the front door rubes on the fender.

Wow! Those new plant workers are doing a bang up job. Let's bring the camaro back to Oshawa

KaBoom1701 · 02-04-2016, 02:17 PM

Ouch....

MikeyCamaro · 02-04-2016, 02:37 PM

Maybe it's for weight savings. If they extended the dash all the way in the corners, that could add 5 ounces.

Mike

2SSRS@Gen5diy · 02-04-2016, 04:11 PM

You think that's bad looks like the inside door panels are not the same size on my car, or the car was built out of square, i can stick my fingers in the gap, don't know how there going to get this right.

02-03-2016, 07:28 PM	#1
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	dash and door fit. Any one have a bad fit with the dash and doors? here is my drivers and passenger let me know what your looks like. Attached Images

02-03-2016, 09:09 PM	#2
suzook Drives: camaro Join Date: May 2013 Location: Stony Brook,NY Posts: 1,756	Mines not as bad as your drivers side, but it definitely not perfect. Gm has issues with the dash and doors lining up. It is the same on my wife's 2014 impala. __________________ 2016 2SS,A8,NAV,NPP,MAG Ride,Sunroof Hyperblue/JetBlack

02-03-2016, 10:37 PM	#3
Sledgehammer70 Lethal Camaro Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013 Location: Temecula, CA Posts: 3,855 View My Garage	My passenger side is perfect, driver side has a gap. __________________ Thanks My Build Thread \| Lethal Garage YouTube \| Lethal Camaro IG \|

02-04-2016, 04:14 AM	#4
Driski Drives: 2016 Camaro Convertible 2SS Join Date: Jan 2016 Location: Mass Posts: 756	I will certainly look for this when my car comes in. Is this something the dealer can and should adjust or will they only screw it up? I know I need to go over the car with a fine tooth comb... would you not accept delivery for something like this? __________________ 2SS Convertible, MRC, NPP, A8, Garnet Red, Blk Bowties GM CAI, Ported TB, Kooks Headers, E85

02-04-2016, 05:38 AM	#5
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I didn't really look at mine, I will when it gets back from the tint shop __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-04-2016, 11:16 AM	#8
MikeyCamaro Drives: 2015 Challenger SRT Join Date: Jan 2016 Location: West Florida Posts: 147	Wow. Are the pictures misleading? That gap between the front dash pod and the sides looks almost big enough to lose a small cell phone in there! Almost looks like the dash pod wasn't made to fit the sides. Mike

02-04-2016, 11:45 AM	#9
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	Mine are ok, better than the 14 Vette..... __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

02-04-2016, 02:17 PM	#12
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Ouch.... __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

02-04-2016, 02:37 PM	#13
MikeyCamaro Drives: 2015 Challenger SRT Join Date: Jan 2016 Location: West Florida Posts: 147	Maybe it's for weight savings. If they extended the dash all the way in the corners, that could add 5 ounces. Mike

02-04-2016, 04:11 PM	#14
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	You think that's bad looks like the inside door panels are not the same size on my car, or the car was built out of square, i can stick my fingers in the gap, don't know how there going to get this right.

User Name		Remember Me?
Password