You are browsing camaro5 
 |
|
04-02-2016, 09:18 PM
|
#1 |
 Drives: 2010 camaro zl427 Join Date: Oct 2014
Location: alabama
Posts: 2
|
stock bottom end
how good is a l99 bottom end. I have a whipple pushing 12 psi with 50 shot of nitro with methane injection. dyno 740 flywheel with auto trans breaking down to 626 to the wheel. does anyone know what the max maybe???
|
|
|
|
04-04-2016, 09:12 PM
|
#2 |
 
Drives: 2013 White ZL1 coupe 682hp/672tq Join Date: Sep 2015
Location: Isle of Wight VA
Posts: 134
|
With a good tune your probably there right now
|
|
|
|
|
04-05-2016, 04:23 PM
|
#3 |
  Drives: 2015 Camaro SS 1LE, 2001 Camaro SS Join Date: Jun 2015
Location: Miami
Posts: 836
|
The L99 bottom end is just as strong as an LS3 bottom end. Several boosted applications making 700-900+ to the wheels on the stock bottom end and holding up just fine over time (meaning they didn't do just two pulls on the dyno and then put in a safer tune after). Personally I think 750 is the most I'd want to play with, but it's up to you if you want to put your engine to the test. You should have no issues whatsoever at your current level if it's set up and tuned well.
__________________
2017 GMC Canyon All Terrain- daily driver/dirt bike hauler
2015 Camaro SS 1LE- sold 2001 Camaro SS SOM M6- sold 1999 Firebird Formula A4- sold |
|
|
|
|
04-11-2016, 11:31 PM
|
#4 |
|
Resident nomad
Drives: 2014 Summit White 1SS/1LE Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 1,765
|
It should hold stock, but a safe bet would be ARP studs for the main caps over the OEM bolts, and ARP head bolts. Cheap insurance. I'd say your getting close to numbers that would warrant forged rods.
__________________
Sold:
2007 Z06 2002 Viper GTS/ACR 2003 Z06 1965 FFR Cobra 2012 Nissan 370Z ADM LSA Stage II, Roto-Fab CAI, Kooks LTH/HFC's, Phastek CC, ported TB, Mishimoto radiator and oil cooler, BC Racing ER Series CO's, JPSS 32mm Black Magic rear bar, JPSS front inserts, R1 Concepts Premier slotted rotors/Goodrich SS lines, Schroth ASM harness, MGW flatstick, Brey-Krause HB, Tuned by NicD, at Cordes Performance Racing. |
|
|
|
|
04-12-2016, 03:56 PM
|
#5 |
   
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,524
|
bottom end will hold more than your trans will
|
|
|
|
|
04-12-2016, 04:16 PM
|
#6 | |
|
|
Quote:
2OP: I think for the A6 tranny you're very close to hit the limit! 
|
|
|
|
|
|
04-12-2016, 09:40 PM
|
#7 |
 
Drives: 2011 SS Super Charged 636RWHP Meth Join Date: Apr 2015
Location: Midland Texas
Posts: 57
|
Trans is issue. I am at 636 wrhp just had trans rebuilt.
|
|
|
|
|
|
|
|
 |
|
|
