![]() |
|
|
#1 |
![]() ![]() ![]() Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,063
|
2010 camaro spoiler removal
so i got my zta spoiler and I am attempting to install it. I have all the bolts and clips removed, but there also seems to be foam tap under the stock spoiler. I really dont want to use a plastic pry tool and ding or scratch the deck lid. Anyone have any tips on getting that spoiler off? No videos show double sided foam tape.
__________________
Apex VS-5RS Forged Wheels,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 103mm TB, Dr Phil Tune,Borla Atak...955rwhp/967rwtq
|
|
|
|
|
|
#2 |
|
'Maro
Drives: 2015 SS 6.2L Auto 2SS Join Date: Sep 2016
Location: US
Posts: 867
|
Are you quite certain the foam tape is sticky on both sides? There is a plastic push pin near the middle of the spoiler that holds it on pretty good even when all the bolts are out. Just grab both sides close to Center and give it a good firm yank upwards
__________________
2015 SS 2SS Auto 93 SCT Perf, Kooks LTH & HFC MBRP Axleback Muffler Delete "Z/28" Spoiler and Grille OEM ZL1 wheels 285/305/35R20 BFG G-force Pro Comp 2
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,063
|
poitive....the white push pin is out....i can see the foam tape. Now the car has stripes....I bought it brand new....maybe the dealer put on the tape if they removed the spoiler and added the strips? i bought this in April of 2010....maybe the early models had it?
__________________
Apex VS-5RS Forged Wheels,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 103mm TB, Dr Phil Tune,Borla Atak...955rwhp/967rwtq
|
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() Drives: 2011 2SS Join Date: Mar 2015
Location: Arlington, Texas
Posts: 1,333
|
Quote:
It’s double sided tape. Try using slight heat from a heat gun and dental floss
__________________
2011 SS L99
LSA Supercharger, BTR Stage 3 PDS Cam, Yank 3200SS, Weapon X Stage 2 intake, LSA Heads, Flex Fuel, Ported throttle body, Speed Engineering Headers, NOWEEDS, ZL1 fuel pump, DSX AUX Pump, ID-1050X injectors, 3” pipe to NPP mufflers, 3.91 gears |
|
|
|
|
|
|
#5 |
![]() ![]() ![]() Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,063
|
Fishing line did the trick. Then it was just a pita to get off the residual. Thanks
__________________
Apex VS-5RS Forged Wheels,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 103mm TB, Dr Phil Tune,Borla Atak...955rwhp/967rwtq
|
|
|
|
|
|
#6 |
|
'Maro
Drives: 2015 SS 6.2L Auto 2SS Join Date: Sep 2016
Location: US
Posts: 867
|
Nice job let's see pics of the new one installed!
__________________
2015 SS 2SS Auto 93 SCT Perf, Kooks LTH & HFC MBRP Axleback Muffler Delete "Z/28" Spoiler and Grille OEM ZL1 wheels 285/305/35R20 BFG G-force Pro Comp 2
|
|
|
|
|
|
|
|
![]() |
|
|