01-16-2018, 06:50 PM | #1 |
Drives: 2010 SS and 2005 Acura TL Join Date: Jul 2015
Location: West Palm Beach Fl.
Posts: 30
|
DRL stopped working, looking for wiring diagram
2010 SS/RS.....
My DRL/fog lights have stopped working and I’m looking Schematic/wiring diagrams. I have used google search and have not had Any luck. Hoping someone has a copy, a link to a good Source. Thanks |
01-17-2018, 01:44 PM | #2 | |
EMERALD COAST CAMAROS
Drives: None Join Date: Feb 2010
Location: Cridersvile, OHIO
Posts: 2,973
|
Quote:
2nd question are your drl's on with your Hids. If the answer to the last question is yes then maybe the harness has come loose in the right wheel well.
__________________
|
|
01-17-2018, 04:15 PM | #3 |
Buckeye
Drives: 2013 2SS RS 1LE Join Date: Apr 2012
Location: Tucson
Posts: 272
|
Or maybe both bulbs are burned out? I would pop a new bulb in one of them to test. Or pull one of the bulbs out and connect it to a 9V battery. If it doesn't light flip the bulb around. If it still doesn't light, bad bulb. If the first bulb lights then I would also check the other bulb and the wiring harness.
__________________
|
01-17-2018, 06:35 PM | #4 |
Drives: 11 camaro Join Date: Mar 2017
Location: Canton ga
Posts: 129
|
__________________
2011 1SS/ Thompson mtrsprts 416,Katech rotate assembly and cnc ls3 heads. Ferrera st. valves,BTR 685 Spr. F1A Procharger,3.70 pulley on 12 rib.Holley aux fuel pump,ZL1 fp and fpcm,dual alky control,Vmax TB,DSX E-85 sensor, fic1300 inj.Lsxperts custom cam,melling OP,mishimoto dual pass HX, ARH 2" headers, MD 4l80e, FTI 3200 stall,3:73 zl1 cradle, BC coil overs ,pfadt sway bars, EBC brakes and slotted rotors: 843rwhp tuned by LSXPERTS
|
01-18-2018, 01:24 PM | #5 | |
EMERALD COAST CAMAROS
Drives: None Join Date: Feb 2010
Location: Cridersvile, OHIO
Posts: 2,973
|
Quote:
__________________
|
|
01-18-2018, 05:56 PM | #6 |
Drives: 2010 SS and 2005 Acura TL Join Date: Jul 2015
Location: West Palm Beach Fl.
Posts: 30
|
Here is what I found. Both wires that feed power to the DRL have no power. Ohm'ed out both wires from the BCM all the way to both bulbs and wiring is just fine. used a jumper to send power to the bulbs and they both work. checked all fuses and they are good. So is the BCM bad? I believe it may be bad. Anyone have any experience with the BCM?
|
01-18-2018, 06:53 PM | #7 |
Drives: 13 Camaro Join Date: Oct 2016
Location: Colorado
Posts: 315
|
Aren't they only on when the car is in drive?
|
01-18-2018, 08:00 PM | #8 |
Drives: 2010 SS and 2005 Acura TL Join Date: Jul 2015
Location: West Palm Beach Fl.
Posts: 30
|
|
11-28-2019, 04:43 PM | #9 |
Drives: black and brown Join Date: May 2018
Location: tx
Posts: 1
|
i have the same exact issue no power anywhere except at the BCM. did you find your issue?
|
11-28-2019, 06:55 PM | #10 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 368
|
Emergency brake also must be off
|
|
|
|
|