20’s on a Clone Z28!!

[Scotty D]

I have just about everything to do the z28 body . Front splitter, front and rear fender flares & side skirts . The only thing I do need is the rear valance ! But want to know if anybody has done 20x11 in the front & 20x12 in the rear for rims !! Just like the look of 20’s better !!
Thanks

[1JEWLDSSRS]

I have a 2011 SS and have the Ferrada FR3's on my Camaro, the fronts are 20x10.5 and rears are 20x11.5 and they fit just fine. Oh and I'm lowered 1.25 all 4 corners..

[Scotty D]

But ,I want the same offset or close to a Z28 cause of the fender flares . I know the offset from the Z makes them poc out a little

[hazy]

why would you go 11 wide front and 12 in rear?

you can get a set of replica 20s with 10 wide front, and 11 wide rear no issues. add that extra inch to each one, and you're probably gonna have a real hard time with fitment up front

here's a thread with quite a few pics.

if you go with these, 20x10 +23 and 20x11 +43, then you'll probably have the setup that you're looking for

[Scotty D]

I have a 1LE with 20x10 & 20x11’s I want the same size if not a little wider to the Z28 specs!! And I don’t want to use 1” spacers ..Again I’m doing the Z28 fender flares ! My wheels will not stick out like the Z’s specs

[hazy]

I think your challenge is going to be the fact that z28 wheels are 19" diameter. Not sure I have anything helpful to add, but below is a thread where the OEM z28 wheel specs are discussed, as well as viable alternatives. Might be worth checking out

https://www.camaro5.com/forums/showthread.php?t=380676

[Scotty D]

Think ,I may just have to do the z28 19’s or spec out something by making some calls

[1badchicken]

I would recommend trying to stick with 19's wheels with the Z28 offset. Is there a specific reason why you want to stick with 20's vs 19's? Unless your ordering your wheels custom you might have a problem finding the specific offset in a 20 configuration unless you plan to use spacers.

I had my original 21 Green Flash wheels on when I first had mine installed.

[C-redfly]

I was debating on 19s or 20s for my Z28 convertible clone. I got Forgestar F14 super deep all around in 19x11 and 19x12 because I wanted the oem Z28 size. I used a 305/30 and a 325 /30. I coulda went 20s and used a thinner sidewall tires. He’s a few pics. I would say get the wheels from Forgestar custom made in the size 20, that’ll be cool.

[SSEssence]

your clone vert is beautiful!

[Katech_Zach]

Scotty, you will be able to make a 20x11 and 20x12 work.

[Leonardbb]

Originally Posted by 1badchicken

I would recommend trying to stick with 19's wheels with the Z28 offset. Is there a specific reason why you want to stick with 20's vs 19's? Unless your ordering your wheels custom you might have a problem finding the specific offset in a 20 configuration unless you plan to use spacers.

I had my original 21 Green Flash wheels on when I first had mine installed.

Could you resend your pictures. I have custom made 22” I’m putting on

[Scotty D]

Originally Posted by Leonardbb

Could you resend your pictures. I have custom made 22” I’m putting on

Cant see your pics bud

[Leonardbb]

Originally Posted by Scotty D

Cant see your pics bud

I was asking the guy above for his pics. I have stock 20s on now with the flares and I just ordered some 22s and wanted to see what his looked like