2010 trunk SS emblem to replace bowtie. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

0stones0 · 01-31-2022, 06:02 PM

I’ve looked high and low for these and can’t find a thing. Anyone have one of these lying around? Would need to cover the holes from the bowtie.

Thanks

MSgt O · 02-01-2022, 04:00 PM

I took my trunk bowtie off and it was glued on, no holes to cover

myold88 · 02-01-2022, 04:46 PM

Early '10 Camaro has holes, not sure when they went with the glue on emblem.
Have you tried to get it from your Chevrolet dealer's parts dept?

1JEWLDSSRS · 02-01-2022, 04:52 PM

My 2011 Camaro was built July 2010, so the hole thing was prior to that as mine was attached with 2 sided automotive tape,

0stones0 · 02-01-2022, 06:15 PM

Think around mid 2010 they got rid of the holes. Mine was built July 09.
Spark’s is no longer producing and the only other thing out there left from them is for 2014-15, which won’t work on my 2010. Hence, I’m hoping someone might have one lying about they’d care to sell.

1JEWLDSSRS · 02-01-2022, 06:35 PM

Quote:

Originally Posted by 0stones0

I’ve looked high and low for these and can’t find a thing. Anyone have one of these lying around? Would need to cover the holes from the bowtie.

Thanks

I searched everywhere too, and this is all I can find. They are stainless and you could paint them whatever color you want, if desired. It doesn't say what the dimensions are, but you could always call them to check. If they are big enough and since they are not connected, but separate pieces, you just might be able to cover up the holes. As cheap as they are, it might be worth a shot. I have purchased lettering from these people and was a good experience. I had a set of old school "cowl induction" emblems on my hood for a bit. Here ya go sir.

https://www.rickscamaros.com/camaro-...ails_tab-title

ADVMax · 02-01-2022, 07:47 PM

yup, I was wondering about just covering and sealing the holes as well. Figured it may be an option. Find a stick on and see if it covers the holes. Dab a spot of silicone in the holes and stick ‘er down!

1JEWLDSSRS · 02-01-2022, 08:11 PM

Could also cover it with a tail panel blackout piece, or even paint the panel piece,then install whatever you like!!

Camaro2ss2010 · 02-01-2022, 08:13 PM

Quote:

Originally Posted by 0stones0

Think around mid 2010 they got rid of the holes. Mine was built July 09.
Spark’s is no longer producing and the only other thing out there left from them is for 2014-15, which won’t work on my 2010. Hence, I’m hoping someone might have one lying about they’d care to sell.

Reach out to emblem pros. Send them a picture of the design and the specs that you want it in. I’m sure they can make one to fit your needs.

0stones0 · 02-02-2022, 03:41 AM

Thanks for the info fellas.
I’ll keep hunting and see if emblem pros can build something for a reasonable cost. Lots of places have the small ones but so far, no one with the correct size.

fireman1153 · 02-02-2022, 04:10 AM

I was once told that the SS emblem off of the trailblazer SS was the right size to cover the holes but I never ordered it and just filled mine with black plugs for now.

NOT A 45 · 02-02-2022, 03:17 PM

The performance cars from the mid 80's to early 90's (if you can call them that) all had red bow ties. So I took red vinyl wrap and made the gold parts of mine red. It looks pretty sharp. Matches my 45th anniversary stripes.

1JEWLDSSRS · 02-02-2022, 04:36 PM

Quote:

Originally Posted by NOT A 45

The performance cars from the mid 80's to early 90's (if you can call them that) all had red bow ties. So I took red vinyl wrap and made the gold parts of mine red. It looks pretty sharp. Matches my 45th anniversary stripes.

That sounds really cool, but I think he is wanting the larger "SS" letters to go on there, he is taking his bow tie off..

0stones0 · 02-02-2022, 05:24 PM

Quote:

Originally Posted by 1JEWLDSSRS

That sounds really cool, but I think he is wanting the larger "SS" letters to go on there, he is taking his bow tie off..

+1 Exactly. Thanks for clarifying sir!

01-31-2022, 06:02 PM	#1
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,571 View My Garage	2010 trunk SS emblem to replace bowtie. I’ve looked high and low for these and can’t find a thing. Anyone have one of these lying around? Would need to cover the holes from the bowtie. Thanks __________________

02-01-2022, 04:46 PM	#3
myold88 Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008 Location: 2018: Lakewood Ranch, Fl. Posts: 8,162 View My Garage	Early '10 Camaro has holes, not sure when they went with the glue on emblem. Have you tried to get it from your Chevrolet dealer's parts dept? __________________

02-01-2022, 04:52 PM	#4
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 13,687	My 2011 Camaro was built July 2010, so the hole thing was prior to that as mine was attached with 2 sided automotive tape, __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

02-01-2022, 06:15 PM	#5
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,571 View My Garage	Think around mid 2010 they got rid of the holes. Mine was built July 09. Spark’s is no longer producing and the only other thing out there left from them is for 2014-15, which won’t work on my 2010. Hence, I’m hoping someone might have one lying about they’d care to sell. __________________

02-01-2022, 08:11 PM	#8
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 13,687	Could also cover it with a tail panel blackout piece, or even paint the panel piece,then install whatever you like!! __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

02-01-2022, 04:00 PM	#2
MSgt O Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021 Location: Cheboygan, Michigan Posts: 906	I took my trunk bowtie off and it was glued on, no holes to cover

02-01-2022, 07:47 PM	#7
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	yup, I was wondering about just covering and sealing the holes as well. Figured it may be an option. Find a stick on and see if it covers the holes. Dab a spot of silicone in the holes and stick ‘er down!

02-02-2022, 03:41 AM	#10
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,571 View My Garage	Thanks for the info fellas. I’ll keep hunting and see if emblem pros can build something for a reasonable cost. Lots of places have the small ones but so far, no one with the correct size. __________________

02-02-2022, 04:10 AM	#11
fireman1153 Drives: 2010 Camaro SS Join Date: Feb 2018 Location: Panama City, FL Posts: 82	I was once told that the SS emblem off of the trailblazer SS was the right size to cover the holes but I never ordered it and just filled mine with black plugs for now. __________________ 2010 Camaro 2SS/RS - 416 stroker, F1A-94 procharger, BTR blower cam, Big Red race valve, AGP intercooler, Alky dual nozzle kit, ZL1 fuel pump with DSX Aux pump, DSX flex fuel sensor, Bosch 210 injectors, Mcleod RXT1200 clutch, MGW flat stick, Tick Performance Level 3 trans, DSS 3.5 aluminum driveshaft, Strange S60 rear, DSS 1400hp axles, Texas speed 1 7/8 headers, X-pipe and MBRP muffler delete, BMR lowering springs, BMR trailing arms and toe rods, Poly motor mounts, RevShift trans mount instert, rear sub frame braces, Tuned by Joey at Pure Fabrication in Panama City, FL

02-02-2022, 03:17 PM	#12
NOT A 45 Drives: 13 CAMARO 2SS LS3-04 SILVERADO LS3 Join Date: Dec 2021 Location: SOUTHERN MARYLAND Posts: 801	The performance cars from the mid 80's to early 90's (if you can call them that) all had red bow ties. So I took red vinyl wrap and made the gold parts of mine red. It looks pretty sharp. Matches my 45th anniversary stripes.