REAR TRUNK PANEL SS EMBLEM 2010 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Farmall · 08-30-2025, 09:09 PM

I bought one and the angle is not correct and the angle is not centered with the slight V shape of the trunk.

I am doing a blackout vinyl and would like to lose the bowtie. Any members done one recently with a quality part?

0stones0 · 08-31-2025, 09:49 AM

Not sure if this will help you or not but, this is what I did…

SS Emblem

iceman_cars · 08-31-2025, 11:45 AM

I ran into the same issue with an aftermarket piece, the angle just looked off. Ended up going with a GM one and it lined up way better. Might be worth tracking down an OEM or a higher-end repro if you want it to sit right with the V.

Farmall · 09-01-2025, 12:14 PM

Thanks for the help.
I am doing the retro SS emblems front and rear with the rear blackout.
The trunk is going to be repainted because of the paint damage under the stock spoiler I found while doing a GM ducktail spoiler swap.
The foot print of the old spoiler is larger and I think not enough two sided tape was used causing vibration.
I am going to return the Anvil purchase and I am thinking about the loose SS emblems on the vinyl wrap or welding the holes and then wraping.
The front emblem looks great.
The whole rear thing is frustrating.

08-30-2025, 09:09 PM	#1
Farmall Drives: 10 SS 6 Speed Join Date: Jun 2025 Location: Central OR Posts: 8	REAR TRUNK PANEL SS EMBLEM 2010 I bought one and the angle is not correct and the angle is not centered with the slight V shape of the trunk. I am doing a blackout vinyl and would like to lose the bowtie. Any members done one recently with a quality part?

08-31-2025, 09:49 AM	#2
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,571 View My Garage	Not sure if this will help you or not but, this is what I did… SS Emblem __________________

08-31-2025, 11:45 AM	#3
iceman_cars Drives: 2019 Chevrolet Camaro ZL1 1LE Join Date: Feb 2024 Location: usa Posts: 10	I ran into the same issue with an aftermarket piece, the angle just looked off. Ended up going with a GM one and it lined up way better. Might be worth tracking down an OEM or a higher-end repro if you want it to sit right with the V.

09-01-2025, 12:14 PM	#4
Farmall Drives: 10 SS 6 Speed Join Date: Jun 2025 Location: Central OR Posts: 8	Thanks for the help. I am doing the retro SS emblems front and rear with the rear blackout. The trunk is going to be repainted because of the paint damage under the stock spoiler I found while doing a GM ducktail spoiler swap. The foot print of the old spoiler is larger and I think not enough two sided tape was used causing vibration. I am going to return the Anvil purchase and I am thinking about the loose SS emblems on the vinyl wrap or welding the holes and then wraping. The front emblem looks great. The whole rear thing is frustrating.