02-12-2010, 02:21 PM | #1 |
Drives: "Modi" son of "Thor" Join Date: May 2009
Location: Waterloo, Ny
Posts: 65
|
GM Hot Cam
Anybody running one in an LS3 yet ?
If so, with or without a tune ? How does it behave ? Thanks
__________________
2SS/rs named "Modi"
Adopted & signed by Scott 8/15/09 Officially "Son #2 of Thor" |
02-12-2010, 02:52 PM | #2 | |
Drives: RSSS Join Date: Dec 2009
Location: DFW
Posts: 2,492
|
Quote:
Couple threads on it, search "Hot Cam". edited for broken link. Last edited by TommyTSquared; 02-12-2010 at 03:47 PM. |
|
02-12-2010, 03:34 PM | #3 | |
Get me my meds!
Drives: 2010 SS/RS M6 & solid black, baby! Join Date: Jun 2009
Location: Maple Valley, Wa.
Posts: 279
|
Quote:
__________________
Mods: ADM race CAI, Vector tune, ARH headers, Borla 'S' types, Revolution hood & chin, MGW short-shifter, T-Rex phantom grille
The legend continues... |
|
02-12-2010, 03:46 PM | #4 |
Drives: RSSS Join Date: Dec 2009
Location: DFW
Posts: 2,492
|
Hmm guess that searchid doesn't stay cached long. Here are the two most prominent threads:
http://www.camaro5.com/forums/showth...hlight=hot+cam http://www.camaro5.com/forums/showth...hlight=hot+cam |
02-12-2010, 03:58 PM | #5 |
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
There is still a need for this thread...
I have read those other threads, and I want to pull the trigger on this mod. I found a dealer that will install it without voiding the warranty. (but it's $2500 to do so...). However.... I am going to try to talk him down a little. With all the threads out there about hot cams, I have yet to hear a video of a 2010 Camaro LS3 with a GM Hotcam..... or...... see an actual rear wheel dyno curve. Robin Lawrence (from GM I think) seems to be the most knowledgable, as he has installed one in a stand alone LS3 and provided an engine dyno comparison of a bunch of cams.... http://www.gmhightechperformance.com...son/index.html... no videos though. ... I need to teach these guys how to make legible data charts in excel So this thread should be for........... Finding the 2010 Camaro Hotcam Video..... if one exists. If we wait a few weeks and still no video or dyno charts... I may have to be the first one to pull the trigger. I want more low end HP, low end torque, noticable lope (even with stock exhaust), and my factory warranty. Drivability is not a big issue to me... as long as I dont stall at the redlights. I am torn b/w 2 mod plans that will cost about $2500 each... 1) LT's, HF cats, cutouts (or catback) and tune 2) GM hotcam (w/ factory tune) + muffler and resonator delete
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. Last edited by Bell040; 02-12-2010 at 04:36 PM. |
02-12-2010, 04:14 PM | #6 | |
Enjoys a good train wreck
Drives: 2010 IBM Camaro 2SS/RS Join Date: Nov 2009
Location: Cincinnati, OH
Posts: 1,800
|
Quote:
|
|
02-12-2010, 04:17 PM | #7 |
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
... added a link and dyno chart to my first post
If I do end up with the hotcam, I will post some vids... but I will be out of car money, so a dyno will have to wait.
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. Last edited by Bell040; 02-12-2010 at 04:40 PM. |
02-12-2010, 04:19 PM | #8 |
Drives: 2010 IOM 2ss/RS Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,545
|
you had me at cam + warrenty... up until the 2500 part, ouch! i thought i read it was like 500 for the cam... 2000 to install? ouch.
|
02-12-2010, 04:22 PM | #9 | ||
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
Quote:
He (the service manager) said it would be 2-3 full days of labor for their best engine guy (20+ yrs experience). Also, the parts list is a little longer than just the camshaft itself. There is some kind of conversion part for the LS3 and some special bolts. quote from Robin... Quote:
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. Last edited by Bell040; 02-12-2010 at 04:56 PM. |
||
02-12-2010, 04:23 PM | #10 |
Drives: RSSS Join Date: Dec 2009
Location: DFW
Posts: 2,492
|
|
02-12-2010, 04:44 PM | #11 | |
Drives: "Modi" son of "Thor" Join Date: May 2009
Location: Waterloo, Ny
Posts: 65
|
Thanks for the info guys.
I am with Bell here. My dealer will cover me powertrain warranty wise if I use the GM cam, weather they install, or I do. Which is fantastic of them !! However, they cant cover with a tune, as the system connects your car directly to GM when they plug it in. So a tune is out of the question. Thus the reason for starting this thread, for the unanswered questions thus far, like what kind of street manners does it have - particularly WITHOUT a tune ? Quote:
__________________
2SS/rs named "Modi"
Adopted & signed by Scott 8/15/09 Officially "Son #2 of Thor" |
|
02-12-2010, 04:48 PM | #12 | |
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
Quote:
Is a cam calibration and a tune the same thing? If so, GM should be able to do this.... unless my sevice manager didn't do his homework before quoting me.... which is possible
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. |
|
02-12-2010, 05:49 PM | #13 |
Drives: "Modi" son of "Thor" Join Date: May 2009
Location: Waterloo, Ny
Posts: 65
|
Yep, same thing. If your dealer is willing to do that, the warranty would fall on their shoulders, as GM will automatically void you (as far as I understand) once it connects to their system. You just cant hide a tune from GM. Perhaps that is part of the increased labor price they are charging ? As far as I have researched so far, the new system that these cars are the first to use connects directly to GM for diagnostics and updates. The dealer has no control to hide a tune. Even a spare pcm wont work, they are tied to the vin and compare odometer readings to the other onboard systems.
The long and short is - reflash the pcm - lose the GM powertrain warranty period. What a given dealer wishes to warranty is their choice - and thier word. Be careful !! Everything above is based on reaserching mainly on this forum, and talking to my dealer. The truth is that nobody seems to be sure about this, and I choose to err on the side of caution. Lots of people are tuning their cars though, so we'll have to see what happens when some of them get into warranty issues
__________________
2SS/rs named "Modi"
Adopted & signed by Scott 8/15/09 Officially "Son #2 of Thor" |
02-12-2010, 06:08 PM | #14 |
Drives: 2010 2SS 6 Speed Man Join Date: Oct 2009
Location: Midwest
Posts: 1,329
|
Where is this coming from ? I smell camshaft ,and I want it ! .....more info please, I am pumped over this ....
If we give them twenty five hunnerd dollars for a cam at dealer level ,maybe the GM rep wouldnt spank us for puttin on long tube headers...
__________________
She's a Zaino Girl !
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cam basics | CamaroSpike23 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 76 | 11-25-2015 11:42 AM |
Hot air Intakes -By Kenne bell | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 66 | 02-08-2011 08:33 PM |
Cam Vs. Cam Vs. Cam | My First Camaro! | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 12 | 12-11-2010 01:54 AM |
List of Intakes that will work with the TVS-2300 MagnaCharger | JJ2010 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 26 | 03-19-2010 02:11 AM |
Great Read and Info on Oil Weight | Banshee | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 1 | 11-23-2009 09:03 PM |