APF/Kenne Bell dyno#'s - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Will@Apf · 04-23-2010, 07:36 PM

All i have to say is WOW.. take a look guys

Video soon to come!

10aSSee D · 04-23-2010, 08:10 PM

Sorry i can't remember, is this the KB alone or supporting mods? How much boost?

Will@Apf · 04-23-2010, 08:19 PM

Quote:

Originally Posted by 10aSSee D

Sorry i can't remember, is this the KB alone or supporting mods? How much boost?

Kenne Bell 2.8 with 10 lb pulley graph showed almost 8lbs, custom APF tune, ARH headers and cat back w/cats...its a mean combo... we will be installing the new KB TB and hope it will not make much more

...this is a stock motor and we do NOT like to push them...

unless we are told too

SinisterSS · 04-24-2010, 06:05 AM

PUSH THAT BITCH!!! I tried to get Will to go for more while we were at the dyno, but I was shot down. Got a little TB coming from KB that APF is going to try out on the car soon. I wanna see if the stock motor can stay together at 625hp

.

navyblueSS · 04-24-2010, 10:15 AM

Very impressive.

*radz28* · 04-24-2010, 10:47 AM

Very intersted in seeing what that bigger TB will do... PLEASE keep us posted

Those are some impressive numbers!

Will@Apf · 04-24-2010, 10:49 AM

Quote:

Originally Posted by navyblueSS

Very impressive.

I feel the same way....I like them all, but Kenne Bell is first and only blower that has impressed APF...

garagelogic · 04-24-2010, 10:57 AM

I've had KB blowers on three different vehicles and they've always delivered the goods. Great torque down low and pleny of horsepower delivered in the higher rpm's. If you have a car that see's 95%+ of its time on the street and not the track, I can't think of a better way to go. It does pretty well at the track, too.

Great job guys!

*radz28* · 04-24-2010, 11:00 AM

Quote:

Originally Posted by garagelogic

I've had KB blowers on three different vehicles and they've always delivered the goods. Great torque down low and pleny of horsepower delivered in the higher rpm's. If you have a car that see's 95%+ of its time on the street and not the track, I can't think of a better way to go. It does pretty well at the track, too.

Great job guys!

When I think of KB, all I can see in my head is a Terminator screaming down the track on it's way to a 10-second 1320'. I remember hearing the SC over the full exhaust. That driver was coming out of the hole really easy too. If he'd have been aggressive, he woulda' run an even better number.

Good stuff

SinisterSS · 04-24-2010, 11:30 AM

radz, same here on the KB mustang memories! This one on the camaro is no where near as loud as the ones we ran on stangs, but the power is sick for a stock LS3.

Will, I tried to download the video's, but I am an idiot and cant figure it out. I may have to give it to you to post up if your good with that stuff. SORRY!

*radz28* · 04-24-2010, 11:36 AM

Quote:

Originally Posted by SinisterSS

radz, same here on the KB mustang memories! This one on the camaro is no where near as loud as the ones we ran on stangs, but the power is sick for a stock LS3.

Will, I tried to download the video's, but I am an idiot and cant figure it out. I may have to give it to you to post up if your good with that stuff. SORRY!

That's kinda' too bad. I like the whine, but, honestly, I heard that blower over the exhaust even after I was behind the car... That might get annoying, I suppose, but it was rad' as a spectator.

Hendrix-Engineering · 04-24-2010, 11:36 AM

Great Results GUYS........Ill see you this week Will,axles on the way,you difently need them with that combo.

SinisterSS · 04-24-2010, 11:48 AM

Cant wait to get the axles and clutch in!! Off to tha track to see what she can do!

Will@Apf · 04-24-2010, 12:55 PM

Quote:

Originally Posted by Hendrix-Engineering

Great Results GUYS........Ill see you this week Will,axles on the way,you difently need them with that combo.

Thank you sir!! and thanks for my new truck

04-23-2010, 07:36 PM	#1
Will@Apf Drives: corvette Join Date: Oct 2009 Location: Acworth GA Posts: 485	APF/Kenne Bell dyno#'s All i have to say is WOW.. take a look guys Video soon to come! Attached Images Last edited by Will@Apf; 04-23-2010 at 08:02 PM.

04-23-2010, 08:10 PM	#2
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Sorry i can't remember, is this the KB alone or supporting mods? How much boost? __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

04-24-2010, 10:15 AM	#5
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Very impressive. __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hot air Intakes -By Kenne bell	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	66	02-08-2011 09:33 PM
Kenne Bell Supercharger Release Special (FREE INSTALL)	Total_Perf_Eng	Forced Induction	33	04-16-2010 12:00 PM
Reputable Shops in So Calilfornia to install TVS2300	Wvallediego	USA - California	64	04-09-2010 07:24 PM
List of Intakes that will work with the TVS-2300 MagnaCharger	JJ2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	03-19-2010 03:11 AM

04-24-2010, 06:05 AM	#4
SinisterSS Drives: 2010 Inferno orange camaro SS Join Date: Jan 2010 Location: Canton. Ga. Posts: 408	PUSH THAT BITCH!!! I tried to get Will to go for more while we were at the dyno, but I was shot down. Got a little TB coming from KB that APF is going to try out on the car soon. I wanna see if the stock motor can stay together at 625hp .

04-24-2010, 10:47 AM	#6
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,787 View My Garage	Very intersted in seeing what that bigger TB will do... PLEASE keep us posted Those are some impressive numbers!

04-24-2010, 10:57 AM	#8
garagelogic Account Suspended Drives: 2010 Shelby GT500 Join Date: Jul 2008 Location: Tennessee Posts: 1,686 View My Garage	I've had KB blowers on three different vehicles and they've always delivered the goods. Great torque down low and pleny of horsepower delivered in the higher rpm's. If you have a car that see's 95%+ of its time on the street and not the track, I can't think of a better way to go. It does pretty well at the track, too. Great job guys!

04-24-2010, 11:30 AM	#10
SinisterSS Drives: 2010 Inferno orange camaro SS Join Date: Jan 2010 Location: Canton. Ga. Posts: 408	radz, same here on the KB mustang memories! This one on the camaro is no where near as loud as the ones we ran on stangs, but the power is sick for a stock LS3. Will, I tried to download the video's, but I am an idiot and cant figure it out. I may have to give it to you to post up if your good with that stuff. SORRY!

04-24-2010, 11:36 AM	#12
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	Great Results GUYS........Ill see you this week Will,axles on the way,you difently need them with that combo.

04-24-2010, 11:48 AM	#13
SinisterSS Drives: 2010 Inferno orange camaro SS Join Date: Jan 2010 Location: Canton. Ga. Posts: 408	Cant wait to get the axles and clutch in!! Off to tha track to see what she can do!