H&R SPRINGS 1.4 F 1.3 R.....
 

Hello Everyone,
I planning to buy H&R springs, but im afraid that the drop is a lot? What do u think? 1.4 front and 1.3 rear?

What do u think of H&R springs?

Kindly submit your suggestions and Pics of ur camaro's lowered.

Thanks.

Have not personally felt their ride on the Camaro but the members that have posted about them say they are quite stiff. When you stop and think about it, they have to be considerably stiffer since they are quite close to the bump stops. Also, you might have problems getting a good alignment on the rear unless you buy the aftermarket alignment parts. The OEM adjustment is hit or miss with adjusting that far out. If this is your DD and ride quality is important to you, you might want to look elsewhere. As far as quality, I think they are close to Eibach. Meaing, they are more of a budget spring that doesn't have the quality of Pfadt or Pedders. Pfadt makes a 1.25in drop spring that looks great on the Camaro and the company is second to none. They also have fantastic customer service so you know you're 100% covered if you run into any problems. :thumbsup:

I ran H&R sport springs before in my previous car and they are quite stiff. Not that I mind though. I think a 1.4" drop is fine. Some of the experts here say that anything over 1.5" is when you run into issues.

Thanks alot guys i will think about it.

i have H&R's on mine... yes its stiffer, but the aggressive stance alone is well worth it.

So you recommend to install it. I see your car often near Costa riffa.. its looked great. keep it up.

it depends on what ur looking for... if you want to lower just for looks... then yes this is a great mod... if you want performance, handling AND the look, i would go with coil overs (assuming budget isn't a problem). springs are great for looks, the price isn't too expensive and they are a few hours work to install...

i live in that area... thanks :D

I have H@R i thought there was not much of a change. I recommend them.ck sig.Thats with 22's. Looks SWEET!

I also have H&R springs, the drop is just enough to get rid of the gap in the wheelwell, it does stiffen it up, but not bad.