Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - MRT | 2010+ Camaro V6 MRT Axle-Back Exhaust

- V6 Bolt-Ons & Tunes (https://www.camaro5.com/forums/forumdisplay.php?f=143)

- - MRT | 2010+ Camaro V6 MRT Axle-Back Exhaust - Version 2.0! Best Prices @ Auto Agenda! (https://www.camaro5.com/forums/showthread.php?t=176790)

MRT | 2010+ Camaro V6 MRT Axle-Back Exhaust - Version 2.0! Best Prices @ Auto Agenda!

2010+ Camaro V6 MRT Axle-Back Exhaust, Version 2.0

http://i784.photobucket.com/albums/y...da/MRTLogo.jpg

Best Prices Guaranteed, Will Beat Any Price!

http://autoagenda.com/uploads/images...177__large.jpg

The MRT Version 2.0 Axle-Back Exhaust for the 2010-2012 V6 Camaro offers presence and tasteful performance sound. Compared to the MRT Version 1.0 Axle-Back for 2010-2012 V6 Camaro, the Version 2.0 Axle-Back exhaust note sounds smoother, deeper and slightly quieter at idle. The result is a classic, muscular sound. In the high RPM range, the two exhaust systems sound similar. Listen to the MRT exhaust videos embedded below to hear the Version 2.0 system for yourself.

The MRT Version 2.0 Axle-Back features construction from the finest 304 stainless steel, making it light-weight and durable. Installation of the exhaust is simple and drill-free. The MRT Axle-Back clamps-on directly in place of the factory axle-back. 3.5" polished stainless steel exhaust tips are welded to the axle-back and included with purchase of the exhaust system.

This MRT Version 2.0 Axle-Back Exhaust (91A177) will fit the 2010-2012 Camaro V6, RS & LS Models. MRT also offers a 2010-2012 Camaro SS Axle-Back Exhaust System.

Product Features
● Made of the highest quality 304 stainless steel
● 3.5-inch polished stainless steel exhaust tips included
● Delivers a performance exhaust tone with presence
● Easy, direct bolt-on installation
● Fits 2010-2012 Camaro, V6 models

Installation Instructions

Order Here: http://autoagenda.com/2010-camaro-v6...st-version-2.0

Order Here: http://autoagenda.com/2010-camaro-v6...st-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6...ersion-2.0-gfx

Quote:

Originally Posted by Mr. aBouD (Post 6085896)

Got my MRT V2 today .. Amazing service .. 100% SATISFIED - Thanks !!!

Quote:

Originally Posted by BowtieBelle (Post 4285040)

Just got mine in! Great price with the free shipping :headbang: sounds BOSS. LOVE it!

Quote:

Originally Posted by Drew 2012 RS (Post 4911461)

Got mine yesterday......had muffler shop install $20...glad I did cause they had to modify to make fit on convertible.....and by the way it sounds FREAKIN' AMAZING....

Quote:

Originally Posted by lazyb22 (Post 3994463)

Got mine installed today. Wow what a clean great sound!!

Thanks guys.

Corey

Quote:

Originally Posted by Rob21sf (Post 4649773)

+1 for AutoAgenda, just got my MRT V2 and installed. Thank you Chris & Brian! :thumbup:

Quote:

Originally Posted by OKCwhiteKnight (Post 4361996)

Love my MRT 2.0's

Quote:

Originally Posted by deryk (Post 4661791)

Put my order in a few days ago and can really vouch for these guys' excellent customer service!:w00t:

Quote:

Originally Posted by The Magic Man (Post 4916361)

Received MRT V2.0 Yesterday. Had the MRT V2.0 welded on this morning before coming to work. I was the first one at the shop when they opened at 8:00am. Car goes up, old cans out, V2's welded on, car car goes down, and I have enough time to get to work @ 9 (a lil late-pulled in at 9:05) Shout out to Roman and Martin over at Speedway Muffler in Rowland Heights.

First impression during the 24 mile drive to work..... I LOVE THE SOUND and cant wait to pair it with the Vararam I have on order. Thanks to all those that posted their opinion re: weld vs clamp. I knew I would love the sound and more so, that no matter what this is the exhaust for me so no sense in clamping just to have it welded later..

Shout out to Chris and Brian at Auto Agenda for great price.

PM or Post w/ Any Questions!

Quote:

Originally Posted by rtcat600man (Post 4058839)

I installed my own MRT 2.0. Then took it to the people who built it and had them weld it on.

I have had many members on this and other Forums say this is one of the best sounding systems they have heard and by far the best sounding MRT 2.0 system.
Take a listen for yourself. Listen to these thru some headphones or ear buds.
Here is a few videos for you:

This one is from inside my Camaro on the way to the dragstrip.

This one is from inside my Camaro while at the dragstrip. Sorry about the Camera tipping.

This one is one that SCRMNG filmed for me while we were at the dragstrip. the last 30 seconds is me on a single pass.

This last clip is one that danrc28 put together when visiting me to hear a MRT 2.0 system. He went from Toronto to Florida and back stopping along the way picking up sound bytes. The video starts off with outside rev's, then an on ramp full throttle run, then an acceleration run from inside while talking about drone. Tape finishes with me passing the camera on the highway doing 3rd gear runs. Which has not been recorded by anyone else using the MRT (or at least I am not aware of anyone with this type of recording.) (rcat's)

Quote:

Originally Posted by Missionboi (Post 4567490)

Here is a video of my exhaust with MRT V2. (dont me to thread jack, just showing ;))
Of course it has more mods, but wow it sounds amazing!

All Orders Shipped!

Free Shipping from Auto Agenda!:rolling5thgen:

Quote:

Originally Posted by bigwayne3000 (Post 3929510)

How is this best pricing? Its the same pricing as on MRT website...

Listed at MAP, (Must Advertise Price) PM for Discounts!

PM or Post w/ Any Questions!

MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!

Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx

Made in the USA. :usa2:

PM or Post w/ Any Questions!

Just ordered mine from you this morning. I was wondering if you would happen to know what would be the best way/tool to cut my stock mufflers off myself? I'm trying to avoid having to take it to a shop and paying someone to do it when I can very well do it myself.

Quote:

Originally Posted by Saint Alban (Post 3985643)

We appreciate the order! We recommend a sawzall, will cut through like butter.