MRT | 2010+ Camaro V6 MRT Axle-Back Exhaust - Version 2.0! Best Prices @ Auto Agenda! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AutoAgenda · 10-14-2011, 08:36 PM

2010+ Camaro V6 MRT Axle-Back Exhaust, Version 2.0

Best Prices Guaranteed, Will Beat Any Price!

The MRT Version 2.0 Axle-Back Exhaust for the 2010-2012 V6 Camaro offers presence and tasteful performance sound. Compared to the MRT Version 1.0 Axle-Back for 2010-2012 V6 Camaro, the Version 2.0 Axle-Back exhaust note sounds smoother, deeper and slightly quieter at idle. The result is a classic, muscular sound. In the high RPM range, the two exhaust systems sound similar. Listen to the MRT exhaust videos embedded below to hear the Version 2.0 system for yourself.

The MRT Version 2.0 Axle-Back features construction from the finest 304 stainless steel, making it light-weight and durable. Installation of the exhaust is simple and drill-free. The MRT Axle-Back clamps-on directly in place of the factory axle-back. 3.5" polished stainless steel exhaust tips are welded to the axle-back and included with purchase of the exhaust system.

This MRT Version 2.0 Axle-Back Exhaust (91A177) will fit the 2010-2012 Camaro V6, RS & LS Models. MRT also offers a 2010-2012 Camaro SS Axle-Back Exhaust System.

Product Features
● Made of the highest quality 304 stainless steel
● 3.5-inch polished stainless steel exhaust tips included
● Delivers a performance exhaust tone with presence
● Easy, direct bolt-on installation
● Fits 2010-2012 Camaro, V6 models

Installation Instructions

Order Here: http://autoagenda.com/2010-camaro-v6...st-version-2.0

Order Here: http://autoagenda.com/2010-camaro-v6...st-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6...ersion-2.0-gfx

Quote:

Originally Posted by Mr. aBouD

Got my MRT V2 today .. Amazing service .. 100% SATISFIED - Thanks !!!

Quote:

Originally Posted by BowtieBelle

Just got mine in! Great price with the free shipping

sounds BOSS. LOVE it!

Quote:

Originally Posted by Drew 2012 RS

Got mine yesterday......had muffler shop install $20...glad I did cause they had to modify to make fit on convertible.....and by the way it sounds FREAKIN' AMAZING....

Quote:

Originally Posted by lazyb22

Got mine installed today. Wow what a clean great sound!!

Thanks guys.

Corey

Quote:

Originally Posted by Rob21sf

+1 for AutoAgenda, just got my MRT V2 and installed. Thank you Chris & Brian!

Quote:

Originally Posted by OKCwhiteKnight

Love my MRT 2.0's

Quote:

Originally Posted by deryk

Put my order in a few days ago and can really vouch for these guys' excellent customer service!

Quote:

Originally Posted by The Magic Man

Received MRT V2.0 Yesterday. Had the MRT V2.0 welded on this morning before coming to work. I was the first one at the shop when they opened at 8:00am. Car goes up, old cans out, V2's welded on, car car goes down, and I have enough time to get to work @ 9 (a lil late-pulled in at 9:05) Shout out to Roman and Martin over at Speedway Muffler in Rowland Heights.

First impression during the 24 mile drive to work..... I LOVE THE SOUND and cant wait to pair it with the Vararam I have on order. Thanks to all those that posted their opinion re: weld vs clamp. I knew I would love the sound and more so, that no matter what this is the exhaust for me so no sense in clamping just to have it welded later..

Shout out to Chris and Brian at Auto Agenda for great price.

AutoAgenda · 10-16-2011, 11:41 PM

PM or Post w/ Any Questions!

Quote:

Originally Posted by rtcat600man

I installed my own MRT 2.0. Then took it to the people who built it and had them weld it on.

I have had many members on this and other Forums say this is one of the best sounding systems they have heard and by far the best sounding MRT 2.0 system.
Take a listen for yourself. Listen to these thru some headphones or ear buds.
Here is a few videos for you:

This one is from inside my Camaro on the way to the dragstrip.

This one is from inside my Camaro while at the dragstrip. Sorry about the Camera tipping.

This one is one that SCRMNG filmed for me while we were at the dragstrip. the last 30 seconds is me on a single pass.

This last clip is one that danrc28 put together when visiting me to hear a MRT 2.0 system. He went from Toronto to Florida and back stopping along the way picking up sound bytes. The video starts off with outside rev's, then an on ramp full throttle run, then an acceleration run from inside while talking about drone. Tape finishes with me passing the camera on the highway doing 3rd gear runs. Which has not been recorded by anyone else using the MRT (or at least I am not aware of anyone with this type of recording.) (rcat's)

Quote:

Originally Posted by Missionboi

Here is a video of my exhaust with MRT V2. (dont me to thread jack, just showing

)
Of course it has more mods, but wow it sounds amazing!

AutoAgenda · 10-19-2011, 12:04 AM

All Orders Shipped!

AutoAgenda · 10-25-2011, 10:12 PM

Free Shipping from Auto Agenda!

AutoAgenda · 10-25-2011, 11:06 PM

Quote:

Originally Posted by bigwayne3000

How is this best pricing? Its the same pricing as on MRT website...

Listed at MAP, (Must Advertise Price) PM for Discounts!

AutoAgenda · 10-26-2011, 07:00 PM

PM or Post w/ Any Questions!

AutoAgenda · 10-26-2011, 10:49 PM

MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!

Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx

Made in the USA.

AutoAgenda · 10-27-2011, 11:43 AM

PM or Post w/ Any Questions!

AutoAgenda · 10-27-2011, 04:09 PM

AutoAgenda · 11-07-2011, 10:35 PM

PM or Post w/ Any Questions!

Saint Alban · 11-08-2011, 08:38 AM

Just ordered mine from you this morning. I was wondering if you would happen to know what would be the best way/tool to cut my stock mufflers off myself? I'm trying to avoid having to take it to a shop and paying someone to do it when I can very well do it myself.

AutoAgenda · 11-08-2011, 11:26 AM

Quote:

Originally Posted by Saint Alban

Just ordered mine from you this morning. I was wondering if you would happen to know what would be the best way/tool to cut my stock mufflers off myself? I'm trying to avoid having to take it to a shop and paying someone to do it when I can very well do it myself.

We appreciate the order! We recommend a sawzall, will cut through like butter.

Saint Alban · 11-08-2011, 11:53 AM

Thanks

AutoAgenda · 11-09-2011, 08:47 PM

MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!

Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx

Made in the USA.

lazyb22 · 11-09-2011, 09:59 PM

Got mine installed today. Wow what a clean great sound!!

Thanks guys.

Corey

AutoAgenda · 11-11-2011, 10:57 AM

Quote:

Originally Posted by lazyb22

Got mine installed today. Wow what a clean great sound!!

Thanks guys.

Corey

Glad to hear it Corey! All of our feedback from everyone with this system simply love it!

AutoAgenda · 11-15-2011, 10:26 AM

MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!

Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx

Made in the USA.

AutoAgenda · 11-15-2011, 05:16 PM

We Appreciate The Orders!

PM or Post w/ Any Questions!

KickToTheJunk · 11-15-2011, 11:23 PM

pm price pls.

and next time, wear a seatbelt

AutoAgenda · 11-17-2011, 10:23 AM

Quote:

Originally Posted by KickToTheJunk

pm price pls.

and next time, wear a seatbelt

PM Sent!

AutoAgenda · 11-21-2011, 10:57 PM

MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!

Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0

Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx

Made in the USA.

rtcat600man · 11-22-2011, 08:43 AM

BUMP

rtcat600man · 11-22-2011, 08:44 AM

I installed my own MRT 2.0. Then took it to the people who built it and had them weld it on.

I have had many members on this and other Forums say this is one of the best sounding systems they have heard and by far the best sounding MRT 2.0 system.
Take a listen for yourself. Listen to these thru some headphones or ear buds.
Here is a few videos for you:

This one is from inside my Camaro on the way to the dragstrip.

This one is from inside my Camaro while at the dragstrip. Sorry about the Camera tipping.

This one is one that SCRMNG filmed for me while we were at the dragstrip. the last 30 seconds is me on a single pass.

This last clip is one that danrc28 put together when visiting me to hear a MRT 2.0 system. He went from Toronto to Florida and back stopping along the way picking up sound bytes. The video starts off with outside rev's, then an on ramp full throttle run, then an acceleration run from inside while talking about drone. Tape finishes with me passing the camera on the highway doing 3rd gear runs. Which has not been recorded by anyone else using the MRT (or at least I am not aware of anyone with this type of recording.) (rcat's)

AutoAgenda · 11-22-2011, 10:36 AM

Fantastic! Thank you for sharing!

The only exhaust work you have done is the MRT 2.0 Axle-Back?

rtcat600man · 11-22-2011, 11:02 AM

Quote:

Originally Posted by AutoAgenda

Fantastic! Thank you for sharing!

The only exhaust work you have done is the MRT 2.0 Axle-Back?

Your welcome.

So far to date.......correct. Soon to change over the winter thou.

10-19-2011, 12:04 AM	#3
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	All Orders Shipped! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

10-25-2011, 10:12 PM	#4
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	Free Shipping from Auto Agenda! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

10-26-2011, 07:00 PM	#6
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	PM or Post w/ Any Questions! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

10-26-2011, 10:49 PM	#7
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	*MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!* Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0 Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx Made in the USA. __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224 Last edited by AutoAgenda; 05-02-2013 at 10:05 PM.

10-27-2011, 11:43 AM	#8
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	PM or Post w/ Any Questions! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

11-07-2011, 10:35 PM	#10
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	PM or Post w/ Any Questions! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

11-08-2011, 08:38 AM	#11
Saint Alban Drives: '10 Black V6 2LT RS Join Date: Jul 2011 Location: Queens, New York (NY5thGen.com) Posts: 892 View My Garage	Just ordered mine from you this morning. I was wondering if you would happen to know what would be the best way/tool to cut my stock mufflers off myself? I'm trying to avoid having to take it to a shop and paying someone to do it when I can very well do it myself. __________________ http://ny5thgen.com/stalban.html

11-08-2011, 11:53 AM	#13
Saint Alban Drives: '10 Black V6 2LT RS Join Date: Jul 2011 Location: Queens, New York (NY5thGen.com) Posts: 892 View My Garage	Thanks __________________ http://ny5thgen.com/stalban.html

11-09-2011, 08:47 PM	#14
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	*MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!* Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0 Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx Made in the USA. __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224 Last edited by AutoAgenda; 05-02-2013 at 10:06 PM.

11-09-2011, 09:59 PM	#15
lazyb22 USCG Drives: 2012 LT1 RS Conv V6 Join Date: Sep 2011 Location: Antioch Ca Posts: 102	Got mine installed today. Wow what a clean great sound!! Thanks guys. Corey __________________ 2012 SIM RS Vert *MODS:* MRT V2 exhaust, CAI Intake, ADM Scoop, Roto-Fab Washer bottle relocation and TriFecta Tune WISH LIST: not in any order SLP Rear Quarter Panel Gills, Solo HFC, RX Catch Can, Vmax Throttle Body, Heritage grill, Afterburner taillights, Colorshifting Halos, LED side markers and Window tint.

11-15-2011, 10:26 AM	#17
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	*MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!* Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0 Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx Made in the USA. __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224 Last edited by AutoAgenda; 05-02-2013 at 10:06 PM.

11-15-2011, 05:16 PM	#18
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	We Appreciate The Orders! PM or Post w/ Any Questions! __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

11-15-2011, 11:23 PM	#19
KickToTheJunk Drives: 2011 Camaro LS M6 Mtv Hbo Ps3 Join Date: Sep 2011 Location: Huntsville, AL Posts: 99	pm price pls. and next time, wear a seatbelt

11-21-2011, 10:57 PM	#21
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	*MRT V2.0 Is By Far The Best 2010-2012 3.6L Axle-Back Exhaust System!* Lowest Price Guaranteed. Order Here: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0 Ground Effects Package Compatible: http://autoagenda.com/2010-camaro-v6-mrt-axle-back-exhaust-version-2.0-gfx Made in the USA. __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224 Last edited by AutoAgenda; 05-02-2013 at 10:06 PM.

11-22-2011, 08:43 AM	#22
rtcat600man having FUN now Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 6,279 View My Garage	BUMP __________________ MY BUILD

11-22-2011, 08:44 AM	#23
rtcat600man having FUN now Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 6,279 View My Garage	I installed my own MRT 2.0. Then took it to the people who built it and had them weld it on. I have had many members on this and other Forums say this is one of the best sounding systems they have heard and by far the best sounding MRT 2.0 system. Take a listen for yourself. Listen to these thru some headphones or ear buds. Here is a few videos for you: This one is from inside my Camaro on the way to the dragstrip. This one is from inside my Camaro while at the dragstrip. Sorry about the Camera tipping. This one is one that SCRMNG filmed for me while we were at the dragstrip. the last 30 seconds is me on a single pass. This last clip is one that danrc28 put together when visiting me to hear a MRT 2.0 system. He went from Toronto to Florida and back stopping along the way picking up sound bytes. The video starts off with outside rev's, then an on ramp full throttle run, then an acceleration run from inside while talking about drone. Tape finishes with me passing the camera on the highway doing 3rd gear runs. Which has not been recorded by anyone else using the MRT (or at least I am not aware of anyone with this type of recording.) (rcat's) __________________ MY BUILD

11-22-2011, 10:36 AM	#24
AutoAgenda Drives: 69 Camaro, 02 Escalade, 67 Eleanor Join Date: Nov 2009 Location: Scottsdale AZ Posts: 4,949	Fantastic! Thank you for sharing! The only exhaust work you have done is the MRT 2.0 Axle-Back? __________________ Click To Send Private Message \| Email: Sales@AutoAgenda.com \| Call 480-307-6224

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unofficial 1/4 Mile 2010+ Camaro Fast List	Merc	Dragstrip, Tracking, Autocrossing, Driving Techniques Discussions	195	05-09-2013 01:45 AM
2010 Camaro 6.2L headers and Exhaust systems	Xplosive Performance	Local Marketplace	82	01-31-2012 05:02 AM
Latest Camaro Products - March 2010	Sean@Phastek	V8 Bolt-Ons & Tunes	26	08-04-2010 04:42 PM
2010 V6 Camaro American MRT Muscle Sound Axle Back Exhaust Version 2.0	Puttnutt24	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	6	01-31-2010 06:11 PM