V6 Guy's!!! Billet stall torque converter special!
 

The same quality construction as the V8 units through & through, but custom stalled for your V6. $599 plus shipping!!!!! NO core charge, this is NOT a retalled stock unit but a custom made unit!

Cut your ET .3-.5 sec with no other mod (traction not included) and usually ships w/in 48 hours of payment clearing.

PM me for details on ordering.

:thumbup::thumbsup:

Rod & Scrming need this!!

Figured the V6 guys would be all over this!

To damn funny...........here is the PM I sent both of them back at 1:09 PM.

:sm0::sm0::sm0::sm0:

torque convertor
http://www.camaro5.com/forums/showthread.php?t=119814

Rod, this could get you into the 12's N/A.

and mid 11's with spray.



John,

Maybe he can send you one for testing?



Have a good one guys,

Mike

LOL! I will probably work something out for John to test and eval, but the snow is there to stay for a few months so they are probably hibernating now. :thumbsup:

If John holds true to what he said, IVY is sleeping for the winter. I know mine is. He lives about an hour north of me and we just picked up 9 inches of snow yesterday, blistering cold, worse road conditions I have seen in 15 years or more.

BBBRRRRRRR! It was even down to 26 degrees HERE last night!

Has anyone tried this mod? I am very interested in doing a stall torque converter on my V6, i'm out to eat some 11 v6 mustangs, and I know that there aren't many out there that work for the 6l50.

And can we get a link to purchase this item?

Can you post more details please !!

These are not restalled OEM stock units, but custom made billet units that can hold 600 plus HP. The key is launching with the motor in its sweet spot and still have excellent driveability on the street plus lock-up economy on the highway.

No link to buy them just PM me for details. This will transform your car.

Auto or Manual ?

Torque converters are in autos only. Manuals have the clutch. :thumbsup:

OK!

Thanx for the lesson :thumbsup:.

What about the installation, do I have to open my gear box to install them and what kind of tunning they require?

Just need to drop the trans and swap out your stock one. Should be done by a qualified shop . Tuning is a user preference. :thumbsup:

I'll install it for $200 for anyone local. :thumbsup:

Very interesting. There are some V6 track guys here that need to be all over this.

I am interested, but I have no idea what this is


Edit : I did read your other thread

so is this something I should do before installing headers + tune

or after?

I would wait on the tune so you can tweak the shift points, etc. :thumbsup:

Rod1's is on the way to his shop and he should have the results soon!!!!

Somehow I saw that one coming.
Any suggestions on clutches for us stick people?

I will need a stock unit...cluth/pressure plate & flywheel to develop one. Anyone with one to donate for the cause let me know. :thumbsup:

Just to clarify, this is NOT a restalled OEM (stock) unit, but a billet unit built to the same specs as our V8 ones that we race with. NO CORE CHARGE!!!! You keep your stock unit to sell or do what you want with. :thumbsup:

Rod1 should be about ready to hit the track to retake his #1 spot in the V6 fastest list with this!!

Who wants a GP on these?

Rod1 is headed to the track this weekend. They are going to run with his current TC and then swap out the new RX unit and run again. Same track, hopefully same day.

Stay tuned for the results!!!!

Wewill do these for $599 now as a GP and NO core required!!!!

Those local, we will do them INSTALLED complete for $799 :thumbsup:

Waiting to here from Rod1 :thumbsup:

I barely stumbled onto this thread, lol....

More goodies from Tracy, and one I can afford! I'll have to look into this after I do my rear-differential swap and tune.

Gonna need a catch can soon, too.......

Bump!!

2-3 day lead time for a custom built unit that will shave .4 plus seconds off your 1/4 mile times and make it a beast on the street. :thumbsup:

No better mod for the$ as far as ET reduction. No core needed as these are not restalled OM units but custom made for the LLT A6.

We will install these for $250 labor plus fluids! :thumbsup:

We also have a complete V8 drivetrain to swap into any A6 cars w/traction issues for $2k complete installed. :thumbsup:

Have been shipping several a week so the users with this mod are growing and the feedback is a big plus. :thumbsup:

Get this mod!!!!! Lot's shipping on a steady basis and great result. Wake up that LLT's acceleration!! :thumbsup:

Watch them being made:

http://www.youtube.com/watch?v=uz1MrZ7YNDU
http://www.youtube.com/watch?v=w1GHp...eature=related

Get your orders in!!!!! built and shipped in 48 hours avg. :thumbsup:

Bump up for one of the best acceleration mods for the auto trans V6. :thumbsup:

Bump for the weekend!

PTKilla just installed one on his twin turbo car....excellent results. :thumbsup:

Sorry I have been absent the past week but I was in TX doing the twin turbo/RX Super Chiller build for the Whiteside Customs SEMA build....make sure to check out their threads! :thumbsup:

Here is a link to PTKillers thread:

http://www.camaro5.com/forums/showthread.php?t=180068

One of the best possible acceleration mods for the money.

Usually ship within 48 hours as each are custom built and NOT restalled OEM cores. NO core charge or core needed. :thumbsup:

If your local we will do the install for $250 plus fluids!!!!