Iceolator for Manifold - left over bracket
So I have installed this:
http://img.tapatalk.com/d/14/02/02/re8a6a6y.jpg And in the process it says to leave out the Front Manifold support bracket, and it's OK to do that... The one the chap is holding here with his left hand: http://img.tapatalk.com/d/14/02/02/etuqupu6.jpg http://www.camaro5.com/forums/showthread.php?p=7279607 But has anyone got an alternative Bracket we CAN put on? Sent from my iPhone using Tapatalk |
Just leave it there. You really don't need it. You can hold onto the bolt in case you ever return it to stock. If you want to use the engine cover, you can add a few washers under the little post to the left of the throttle body.
|
Disconnect the battery if your going to unplug the Throttle body. I just left the connection and set the throttle body to the side. Is that a 10mm or 25mm?
|
Iceolator for Manifold - left over bracket
Thanks EddieFuzz,
I have my CatchCan mounted via the Post so all should be good for the Engine Cover level. It is a 5/8"? Iceolator via. Apex ... it's NOT the 25mm it's the thinner one ... and a new Ported TB at the same time! :-) Sent from my iPhone using Tapatalk |
Great, you should really notice a difference. Two really good MODS, two of my first, your on your way...I just put Hotchkis front end links on...Have fun.
|
I just removed mine so it does not look like something's not right. I'd say remove it.
|
I saw this on another Forum Post ... but it was to do with the 25mm Iceolator ... not sure ours would give enough height.
http://img.tapatalk.com/d/14/02/02/5aha7eqa.jpg Sent from my iPhone using Tapatalk |
drill out both holes over standard size. to the next I think 3/8" and it will fit
|
Mine is left out & no problems. Never put the engine cover back on & like it like that!
|
That's to All :-)
What a Team! :-) Sent from my iPhone using Tapatalk |
1 Attachment(s)
I made an adapter for mine. A piece of 1/4 inch aluminum plate with 2 holes drilled in it and a piece of 3/4 inch aluminum round stock with 1 hole drilled through center. I realize it probably isn't necessary but it does give it a finished look.
|
More photos plz!
Drawings! Maybe Cake :-) Sent from my iPhone using Tapatalk |
|
Quote:
Looks like your support Bracket is on there? Sent from my iPhone using Tapatalk |
All times are GMT -5. The time now is 02:49 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.