Jacking Points
Can anyone tell me where the jacking points are on a '67? I want to make sure I am doing it the right way. If anyone has a picture of where to jack it up, that would be even better!
:thanks: |
check the dimples on the body seem below the rockers
https://www.google.com/search?q=cama...F%3B1024%3B768 |
Jack the front end under the sub-frame cross-member under the engine, or under the spring seat area of the lower control arms. Jack the back under the center of the axle housing.
|
1 Attachment(s)
Don't use the front cross member with out using some type plate steal or wood block to capture the full area of the frame or it will cause it to dish in over time. It's not supported by anything and the steal is thin.
Not my car, but I did the same thing to fix mine a very common problem and how to fixed it. Attachment 485034 |
All times are GMT -5. The time now is 08:26 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.