New revised PDIM available at GMPARTSHOUSE
 

Personal Device Interface Module (PDIM)
This Personal Device interface Module (PDIM) allows the user to plug their remote audio devices (iPod, MP3 player, etc.) into the USB port. The PDIM allows for command and control of the remote audio device through the radio and steering wheel controls.

Here is a thread with the origional problems that were fixed http://www.camaro5.com/forums/showthread.php?t=31235


Price 156.98

To order please give us a call or you can order here in our Camaro catalog http://store.gmpartshouse.com/partlo...egoryID=161268

This is the latest design dont get one of the ones from some otherguys with the flawed software!!!!!

If you already have one with the old software we have the upgrade module for that too price is 110.06 and can be ordered here http://www.gmpartshouseusa.com/partl...egoryID=161268

What is the p/n of the pdim you are selling? Thanks

20940641 for the complete add in kit or
20927509 for the module to upgrade an old unit

Get your PDIM from GM Parts House.

Dont be fooled get the latest edition!

Awesome eddition to seamlessly integrate your MP3 player

Question: When buying just the upgrade module, do we need to take our car back to the dealership to have it re-programmed? Or is this upgrade module plug-n-play?

It appears from the service procedure that it will be plug and play

we can also install these as well if you are local or willing to travel

get yours today

for the updated part you are selling i have a question. I had the PDIM installed at my dealership. if I buy the udated part and want to install it myself what needs to be done? Is it the part thats in the console that needs to be replaced?

If it is already installed all you'll need to do is replace the module and it will still work. I 2 new part number modules to test in mine tomorrow and then I will post the hardware and software versions and I will make sure it works as just a plug and play.

Ok to the good stuff.

My build date was 5/29/2009 so I had part number 20840958 installed. The hardware version is CB/CC.

http://www.gmpartshouse.com/2010-camaro/20840958.jpg

http://www.gmpartshouse.com/2010-cam...0958-CB-CC.jpg



I have seen references to part number 20927509. This hardware version is DA/DX



http://www.gmpartshouse.com/2010-camaro/20927509.jpg

http://www.gmpartshouse.com/2010-cam...7509-DA-DX.jpg



I have also seen a new part number 20985421 in the catalog. This is version DB/DB.



http://www.gmpartshouse.com/2010-camaro/20985421.jpg

http://www.gmpartshouse.com/2010-cam...5421-DB-DB.jpg



This is not anything I've picked up off the internet. All 3 modules, versions and pictures were done by me today with my own personal vehicle.

If you don't have the PDIM and you buy the latest PDIM kit, 20940641, it will come with part number 20927509 (DA/DX). I know this because I just got a 20940641 kit on Friday and opened it and the part number on the module is 20940641.

It does appear to me that GM will be adding the new number, 20985421 to that kit, but it has not been done yet.

There is all of the good news.

The bad news is, if you have a 2010, the latest part number in any catalogs, with GM or reference material is 20927509 (DA/DX). If you get it done under warranty for a 2010 you will only be allowed to get 20927509 or the claim will bounce.

If you have a 2011 and you don't have part number 20985421, then you can get it and warranty will pay for it.

So the current PDIM add-on kit does not have the new part number in it as of this moment. I do believe, however, that it will shortly.

Personally, with the 2010's, I don't know why GM just doesn't change all of the part numbers over to the latest one, 20985421. The 2011 module works in the 2010 as that is what I did today. Any other questions, just ask. I'll answer if I know the answer!

Very nice writeup buddy I see someone was busy this weekend

Order you PDIM today!

When will you have the new part number 20985421, I want to replace my PDIM in my 2010? Thanks!

We can get them now please feel free to give me a call or shoot me an email patrick@gmpartshouse.com

so let me make sure i understand this.....I have a early 2010 2SS that has a PDIM from the factory so to get the newest version do i need the upgrade or do i need to replace my early PDIM?

You need the 20985421 PDIM.

That is correct. Gene plugged them all in to see which ones worked and have the latest info. He's the man isnt he!

Is there a DIY for replacing the PDIM? I have no idea where it is and how to change it

I will make one up to post up

thanks

your only source for the pdim

no programing required

With the new revised kits, or are you saying if you were upgrading from an older to a newer module?

If you're adding the PDIM to your vehicle you will need programming. If you're upgrading your module, no programming is needed.

order yours today

Will the pdim with an iPhone allow me to make calls through the stereo? Or do I need Bluetooth for that?

The Blueetooth on this is to only stream the music from your phone to the radio. The OnStar Bluetooth module is for the wireless calls.

What specifically is fixed with this PDIM. I added the PDIM to my 2010 1SS. I experience crackling when I browse other songs, while playing a song. I also get a pop up on the iPhone 4 saying that the accessory isn't supported, even though it seems to work.

Will these issues be fixed?

are PDIM upgrades covered under warranty on a 2SS?

only if there is a problem

The main issue was with the use of memory sticks and them not being fully read but I have heard of this poping sound and I believe this is fixed as well

order yours today

pleanty in the warehouse

ok i have a 2010 2ss without on star ( not in america ) and the hands free dosent work i only can use bluetooth for music but my friends 2011 2ss has hands free

what parts do i need to make hands free work ??? ( i checked i have a mic )