Installing a JDP tow hook today
1 Attachment(s)
Just wanted to share what I'm doing today. My lovely wife got me a tow hook for Christmas and encouraged me to install it today. So I've never done this nor did it come with instructions but after a few google searches I felt i could do it. I was most nervous about removing the front fascia. After it was removed I'm not sure why I was so scared lol. It was super easy. Here is a few pics of where I'm at...
|
1 Attachment(s)
This was the easy part. Make sure you mark where you want the hook BEFORE removing the fascia.
|
1 Attachment(s)
My only hiccup to this point was this connector. I had the front end literally off and didn't disconnect this. I had to hold the front end in one hand and unplug this with the other. No fun....
|
Ok so everything is done and I think it turned out well. I had to remove the front end a couple times to get the hook aligned just right. I'm really surprised this hook didn't come with a template for drilling holes. There are plenty of reference points to go off of. I would of cut an hour off the install time had I not had to adjust the hook so many times. This was my first time ordering from JDP and everything went great. They are good people to deal with.
|
1 Attachment(s)
.
|
1 Attachment(s)
Another angle
|
tow hook
great job! i have to do mine here shortly.
|
Thanks!
|
How did you measure to figure out where to drill holes? Or did it come with a template?
Looks great! |
Installing a JDP tow hook today
Quote:
If you read his DIY you'll see he said there was no template and what he did to measure the holes. Sent from my AGM, 2SS/RS |
Installing a JDP tow hook today
Dup post
Sent from my AGM, 2SS/RS |
BigBlock before I took the bumper off I used I long pic to mark where the hook should go. Basically centered it so it'd come through the grill. Once I drilled the holes where I marked them I installed the tow hook. It has Oblonged holes so you can fine tune where it comes through the grill at. As long as you're patient it'll turn out fine
|
In the second picture you can also see where I marked the support with a sharpie.
|
This is on the to-do list with the new ZL1 bumper in the spring. Looks good!!
|
All times are GMT -5. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.