2010 Camaro engine bay showing DI 3.6L V6 LLT engine ?
3 Attachment(s)
You decide.... I think yes!!
First engine bay photos. Also featured on homepage. CLUES: -- "LLT" letters on some hoses indicate GM's LLT engine (the direct-injection 3.6L V6) -- throttle-body size / shape and bolts holding it on -- three fluid reservoirs in the same locations Attachment 4916 http://www.camaro5.com/forums/attach...9&d=1211479044 http://www.camaro5.com/forums/attach...0&d=1211479044 comparison engines.... Attachment 4917 Attachment 4918 |
so does this mean the v6 is not going to be direct injection?
|
I'd say the engine cover and exhaust says nothing about DI, only that it is the 3.6L.
|
1 Attachment(s)
I believe with 99% certainty that that engine IS the Direct Injected V6:
Attachment 4912 Note the two main similarities: 1: the hump at the rear of the intake manifold, 2: and the vacuum tube going into the manifold. :bow: Direct Injection :drool: |
Quote:
woah, didnt notice that, badass. |
Thats the answer I was waiting for.
But damn, where are all these pics comming from. |
Does the non DI have the vacuum hose (can't tell with the covers on)? The hump...now that is something I missed. By George, I think you are right.
|
Another thing to look for is the Throttle-Body size and shape and the bolts holding it on. Also the three fluid reservoirs are in the same locations. Lots of little cues. Including the servo-looking mechanism on the side of the throttle body!
Hower, one unrelated thing that's cool to see is that the hood is NOT supported by a prop-rod! Cool! I like that! Prop-rods scream "cheap" to me! |
Never thought i would be so excited about a hump on top of the engine.
I do think it is the DI 3.6 not only because of that but the disciples wouldn't have stressed the performance of the V6 if it wasn't around 300hp. |
What are the chances they will put a nice cover on the Camaro's V6 like that?
|
I hope this photo wasn't suppose to get out because there is a reflection of a face in the car.
|
That looks like DI to me - look at the intake casting flash and TB. Looks very encouraging :D
|
That is a very shiny silver camaro color that we have not seen. This could be a final production vehice shot... The first one seen :)
|
Looks black to me.
|
All times are GMT -5. The time now is 04:37 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.