Racing Brake 2 pc Rotors Installed
6 Attachment(s)
I installed my Racing Brake 2 piece rotors with open slots, Stainless steel braided brake lines and Hawk HPS brake pads today. The rotors save about 6 lbs of weight each. I already had Motul RBF600 brake fluid in the car. To replace the lines it only took about 6 ounces of fluid to bleed the new lines.
To break in the new pads, it took about ten 35 mph moderate pressure stops and another ten 55 mph hard stops to get the temps up. It was only about 25degrees outside at the time. The brakes have a very firm feel now compared to stock. Stock Rotor. The new thickness is 32mm. Minimum thickness is 30mm. Attachment 83966 Stock brake line. Attachment 83958 New Stainless Steel Braided line installed on front. Attachment 83964 Racing Brake 2 pc rotor, SS line and Hawk pads installed. Attachment 83960 Racing Brake 2 pc rotor with open slots. New thickness is 30mm. Minimum thickness is 28mm. Attachment 83965 Rear stainless steel line installed. Attachment 83962 |
Those look great! Do you have a pic with the wheels on?
|
Here's some more pics
3 Attachment(s)
Front rotor on car.
Attachment 84051 Front Rotors, SS brake lines, Front and Rear Pads. Attachment 84054 Pic of the rotor venting. Attachment 84053 |
I can see this becoming a popular mod considering these cars' weight issues. 24 pounds is even more impressive considering that it's all rotating mass. Who did you get those rotors from?
|
That's a good looking setup; those rotors look so much better than the stock ones. Besides the firmer feel, do they seem to grip better?
|
Quote:
Quote:
|
Nice write up. How much weight loss?
|
Those rotors look bad ass. Where did you get them and how much ?
|
I am putting mine on this week, can't wait! Will post pics.
What is the useful life on the Motul RBF600? Any idea of mile interval before you need to change it? |
Looking good. Can't wait to receive mine also!
|
Quote:
Quote:
http://www.racingbrake.com/CAMARO_SS...138-381-01.htm Quote:
|
Those look fantastic!!! 24lbs loss of unsprung weight is AMAZING!!! Great job.
This is next after i get my headers and tuner. |
Better be quick, not sure how long racing Brake is holding the Camaro5 discount!
They are working on the rear step currently. |
i put my rb rotors on last week i got the pedders stainless brake lines also and it brakes alot firmer now and looks better
|
All times are GMT -5. The time now is 08:47 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.