G200Pilot, JRE 416 YSI A6 872 RWHP 730 RWTQ - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 03-27-2012, 03:18 PM

On 10/13/11 G200Pilot ordered my Forged 416 Blower Engine package, My Built 6L80E, A Vortech YSI, Vortech Cog Kit, and All Supporting components which We shipped To FL. for assembly.

On March 5th of this month, G200Pilots 2010 Camaro was shipped to us in CT. in Boxes with just My 416 sitting on the motor mounts, My Team Nick D, Tony C, and Teddy Jr. sorted through all the parts and started working to assemble this Project with Nick D. Doing the majority of the work.

On March 16th I was driving this car to put 500 miles on before I put it on the Dyno.

On March 22nd I put it on the Dyno and began to check the tune, on the third pull it put down 816 RWHP at 5900 RPM, took break for lunch and on the 4th pull the car started to break up, We went through the gamut of Plugs wires coils to no avail, then we pulled the injectors to find that there were tiny filings from the new Aeromotive fuel system even with a 40 micron filter, replaced the injectors added a 10 micron filter, and today March 27th Today, I finished checking the Tune on the Dyno and here are the Results.

This Tune Was Written at my Desk and required no adjustments on the dyno

JRE FORGED 416 LS3 BLOCK
JRE CNC HEADS
JRE SMOOTH IDLE BLOWER CAM PACAKGE
JRE CUSTOM AEROMOTIVE FUEL SYSTEM
JRE 6L80E
JRE PROTORQUE CONVERTER
JRE CUSTOM SCT TUNE
ID-1000S
VORTECH YSI 20 PSI
VORTECH COG DRIVE
JRE/VORTECH UPGRADE
DSS 1 PIECE DRIVESHAFT
DSS AXLES
JRE POSI MOD
JRE BILLET CAPS
3.45 GEARS
VP 104 UNLEADED

This is an 1100 Crank HP L99.

2010 SSRS · 03-27-2012, 03:25 PM

another Jannetty Monster Camaro

HufferSS · 03-27-2012, 03:40 PM

Congratulations George...that is awesome! That should wash the bad taste that "other" SC company left in your mouth.

x2martell24 · 03-27-2012, 03:43 PM

Damn Ted.... You are the master (and your team of course!!)

MANNYS2SS/RS · 03-27-2012, 03:51 PM

Congratulation George

and another great job by Ted, can't wait to see you running at the track.

G200 Pilot · 03-27-2012, 04:13 PM

Quote:

Originally Posted by HufferSS

Congratulations George...that is awesome! That should wash the bad taste that "other" SC company left in your mouth.

Thanks Huff! Ted tells me the IAT's were not even a factor! It's been a LOOONG time without my car...

JLE58 · 03-27-2012, 04:29 PM

Awesome work guys! Ted did you guys have to used 1/2 head studs or what?

JANNETTYRACING · 03-27-2012, 04:36 PM

Quote:

Originally Posted by JLE58

Awesome work guys! Ted did you guys have to used 1/2 head studs or what?

No just Standard ARP, a Good Tune and Good Fuel.

Ted.

JLE58 · 03-27-2012, 04:40 PM

Good deal!

Fiftydriver · 03-27-2012, 06:25 PM

Most impressive!!!

Good job guys. Good to know we can work with that L99 block!!!

Motion427 · 03-27-2012, 06:45 PM

I think the exhaust fumes got into Ted when he posted because we are in march and not may.(joke).Unless it was last year, Or he's in a hurry for summer.
Excellent work!!!!!!

Z_Rocks · 03-27-2012, 06:56 PM

Quote:

Originally Posted by JANNETTYRACING

On May 5th ...

On May 16th ...

On May 22nd ...

Ted, just curious, are you in "Back to the Future" time zone...?

JANNETTYRACING · 03-27-2012, 07:32 PM

Quote:

Originally Posted by Z_Rocks

Ted, just curious, are you in "Back to the Future" time zone...?

Definitely fumes and Excitement Mixed, That and we were talking about my Track Rental May 25th.

I fixed it

Z_Rocks · 03-27-2012, 07:40 PM

Quote:

Originally Posted by JANNETTYRACING

Definitely fumes and Excitement Mixed, That and we were talking about my Track Rental May 25th.

I fixed it

You're always full of energy & life...

03-27-2012, 03:25 PM	#2
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	another Jannetty Monster Camaro __________________ Jannetty Racing JRE Street Package

03-27-2012, 03:40 PM	#3
HufferSS I Wanna Go Faster!! Drives: 2011 2SS Synergy Green M6 Join Date: Apr 2011 Location: SC Posts: 3,323	Congratulations George...that is awesome! That should wash the bad taste that "other" SC company left in your mouth. __________________ Built by Vengeance Racing 9.31@154.81 mph Procharger F1-X RPM Level 7 4L80e + Coan Converter Hendrix 9" Rear Axle + 3.50 Gear ARH 2" LTs+3.5" Exhaust Fore Fuel System, Bogarts + Hoosier Slicks Pfadt Drag Pack Suspension My Build Thread \| Best Pass To Date

03-27-2012, 03:51 PM	#5
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	Congratulation George and another great job by Ted, can't wait to see you running at the track. __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi

03-27-2012, 06:25 PM	#10
Fiftydriver Drives: 2010 Camaro 2SSRS RJT L99 Join Date: Jun 2010 Location: Fort Shaw, Montana Posts: 1,242	Most impressive!!! Good job guys. Good to know we can work with that L99 block!!! __________________ Fiftydriver 2010 SSRS, RJTC, L99, Maggie 2300 SC, 3.4" pulley, Roto-Fab CAI, Dynatech Supermaxx LT headers, Dynatech High Flow cats, Corsa Cat back exhaust, Dual Elite Engineering catch can, MSD wires and Jannetty custom tune, JRE custom diff w/ posi mod, 3.91 LPE gears, Pfaht trailing arms, Pfaht trailing arm and Diff bushings, drop springs and sport sway bars front and back, Fesler dual guage pillar pod w/ AM Cobalt Boost and A/F guages. More to come!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jannetty Racing Vortech YSI makes 610 RWHP 545 RWTQ	JANNETTYRACING	Forced Induction - V8	55	06-05-2010 10:29 AM
561.6 RWHP 540.1 RWTQ in 2 days work	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	80	02-17-2010 03:47 PM
Jannetty Racing Unopened L99 Makes 545 RWHP 553 RWTQ	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	13	12-12-2009 11:13 PM
Cam Headers Intake Tune 446 RWHP 430 RWTQ	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	72	11-25-2009 04:09 PM

03-27-2012, 03:43 PM	#4
x2martell24 Drives: 2021 Camaro ZL1 Join Date: Mar 2011 Location: Hartsville, SC Posts: 216 View My Garage	Damn Ted.... You are the master (and your team of course!!)

03-27-2012, 04:29 PM	#7
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	Awesome work guys! Ted did you guys have to used 1/2 head studs or what?

03-27-2012, 04:40 PM	#9
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	Good deal!

03-27-2012, 06:45 PM	#11
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	I think the exhaust fumes got into Ted when he posted because we are in march and not may.(joke).Unless it was last year, Or he's in a hurry for summer. Excellent work!!!!!!