10-19-2021, 09:56 AM | #1 |
sorenvamps
Drives: 2013 Camaro LS muffler delete CAI Join Date: Oct 2020
Location: Arizona, Chandler
Posts: 1
|
camaro stabilitrak
usually I'm driving and when i want to speed here and there ill half throttle and when i come to a stop after that stabilitrack goes on and the thang starts jumping like a Malibu with cut springs (not actually but it jumps) and ive taken it to dealer and tried reading codes all that nothing..
|
10-19-2021, 10:58 AM | #2 |
Drives: 2010 Camaro SS Join Date: Oct 2020
Location: Newburgh
Posts: 164
|
This is a common issue with gen5. Moats common issue is a bad battery have it checked/replaced. If that's not it below is a link that covers just about every scenario. It helped me with my issue which ended up being a wiring issue.
https://www.camaro5.com/forums/showthread.php?t=527875 Sent from my SM-F916U using Tapatalk |
10-19-2021, 11:37 AM | #3 |
Drives: 2012 Victory Red LFX Join Date: Dec 2012
Location: west central Texas
Posts: 1,310
|
To my knowledge the V6s don't get the heat soak issues the 8s do. It seems like the majority of the time the stabilitrack is the first code thrown out there when its really an electrical slash battery related issue. Not always but usually.
__________________
2018 SS wheels, red Heritage grille, actual driving lights, ZL1 strut tower brace, GM Performance billet aluminum fuel door, front grille Bowtie delete, painted red rotors and calipers, 1/4 window American Flags, splash guards, AEM dry panel air filter.
|
10-20-2021, 10:47 PM | #4 |
My experience has been that Stabilitrak warning comes up for a number of reasons. I grenaded an engine and got Stabilitrak warning. I've heard it come up for various mechanical problems.
__________________
2010 2SS living in Los Angeles
replaced engine @ 93,000 miles w/ crate engine, camshaft by Comp Cams installed by me, replaced valve train parts, 1.4" BMR lowering springs ZL1 factory rims misc: drilled and slotted rotors, fresh air brake cooling system, new speakers, installed reverse camera, muffler delete |
|
10-20-2021, 11:05 PM | #5 |
Drives: 2010 ZL550& 2021 C8 Z51 Join Date: Feb 2010
Location: Near Philadelphia
Posts: 1,577
|
I had Stabilitrak light keep coming on. I found out that I was missing a body ground. Added a ground from bell housing to the body and all my problems went away. This actually fixed my transmission issues as well.
__________________
|
10-21-2021, 10:27 AM | #6 |
Drives: 2019 Camaro ZL1 2004 Pontiac GTO Join Date: Feb 2018
Location: Roscoe, IL
Posts: 134
|
I had this problem once. Loose spark plug wire caused it.
|
10-21-2021, 10:49 AM | #7 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
can be a million things. First step pull dtc codes. Very common is throttle body issues. Will throw stabiltrac on, limp mode, bucking.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
10-25-2021, 05:38 AM | #8 |
Drives: 2012 Camaro 2SS 2003 Silverado SS Join Date: Jun 2021
Location: New York
Posts: 6
|
Check spark in plug and wires. the rough ride and stabilitrack are indicators of misfire. I had a plug wire come off just so slightly it was intermittent but had very similar issue.
|
10-26-2021, 07:00 AM | #9 | |
Banned
Drives: 2010 LS Join Date: Feb 2021
Location: Pgh
Posts: 411
|
Quote:
POWER MODE ! Never got a stablilitrack error for misfires, and I had them for a while, till I fixed the problem. |
|
10-29-2021, 08:02 AM | #10 |
Drives: 2011 Camaro SS 2SS Join Date: Aug 2021
Location: Palm Beach
Posts: 4
|
I had this same problem after ring and pinion install and it was the wheel speed sensor.
|
10-29-2021, 08:54 AM | #11 |
|
Do you have magnetic ride?
__________________
|
|
|
|
|