[jlr0042]

Snagged a couple of great deals on an MSD intake manifold and Soler 100mm throttle body, so selling my old LT2 intake manifold and LT5 throttle body. Now open to selling IM and TB separately.
Ran on car for 15K miles
For both: $300 obo + shipping and fees.
LT2 IM: $230
LT5 TB: :130
LT2 IM + LT5 TB
LT2 intake manifold is ready for installation. Has the underside cut out, the back brake booster fitting installed, and the snout has been ported for the LT5 95mm throttle body. I did have concerns that the porting made the snout too thin, so I went back with some Permatex Black Plastic Bonder to reinforce the snout. LT5 throttle body is mounted using an ICT Billet Gen 5 LT5 95mm Throttle Body Adapter Plate. I hit the seam between the adapter plate and the LT2 IM with some Black RTV Silicone Gasket material to make sure it is well sealed. Also have all the normal snout and runner gaskets installed. I'll be throwing in the tubing and hose clamps needed for all the vacuum lines, but I do recommend buying different tubing, mine kept cracking after a couple of months.

Also have a Soler 95mm to 87mm throttle body adapter.
Asking $35 shipped.
Soler Adapter Pics

[J.A.Black]

I'm interested. I have a 95mm throttle body but I'll take yours as well if you're not willing to separate. How much of a difference have you noticed with the 100mm and msd compared to the LT2 and 95mm? Also, is the LT2 ported other than the mouth?

[jlr0042]

Originally Posted by J.A.Black

I'm interested. I have a 95mm throttle body but I'll take yours as well if you're not willing to separate. How much of a difference have you noticed with the 100mm and msd compared to the LT2 and 95mm? Also, is the LT2 ported other than the mouth?

Only the snout is ported, runners are untouched. I didn’t have a long enough burr to try porting the runners.

I just did the swap yesterday and haven’t had an opportunity to do a hard WOT run. Partial throttle does seem more responsive though. From what I understand, going from the LT2 IM/LT5 TB setup to a 100mm+ TB/MSD or Hi Ram setup is more noticeable when cammed or boosted, which I have plans to do.

[jlr0042]

Bump and price drop, now open to splitting IM and TB.

[lt4camaro]

Has the throttle body been touched? no porting or smoothing? is it a OE part ? can you take a picture of the black plastic housing with the part # on it. I would assume the adapter goes with it?

[jlr0042]

Originally Posted by lt4camaro

Has the throttle body been touched? no porting or smoothing? is it a OE part ? can you take a picture of the black plastic housing with the part # on it. I would assume the adapter goes with it?

The throttle body is an untouched OEM part. Here's a pic of the side black plastic housing.

[lt4camaro]

Originally Posted by jlr0042

The throttle body is an untouched OEM part. Here's a pic of the side black plastic housing.

I sent you a PM

[Conner0388]

Still have throttle body?

[jlr0042]

Everything still for sale, responded to all IMs.

[J.A.Black]

Originally Posted by jlr0042

Everything still for sale, responded to all IMs.

PM sent