08-30-2022, 11:35 AM | #1 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
2013/2014 ZL1 Roller For Sale
selling one of my ZL1's car was a thefrt recovery from cali car was put back to 100% stock to get recerted as a rebuilt title me and the car has gone through all the hoops to get the car good to go
car had 9800 miles when i got it about 13k now was no body damage as it was a theft i replaced motor and trans for a borrowed buddies setup all other parts that were missing were replaced with new down to gm bolts drove car for a summer its mint changed rear to 2014 led tails what you need motor trans drive shaft diff and axles front rotors and calipers has 2018 SS wheels now was selling some of the good parts as was gona make this a race car but its too nice to chop up looking for $12500 canadian about $9000 usd LAST AND FINAL PRICE Last edited by Blownfogger540; 06-15-2023 at 12:46 PM. |
03-08-2023, 10:43 PM | #2 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
TTT !
|
03-11-2023, 03:05 PM | #3 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
I don’t see it listed is it an auto ? Got more pics ? What’s your zip code need shipping to 77808 texas
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
03-11-2023, 03:06 PM | #4 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
What was the estimate to fix it ?
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
03-11-2023, 07:44 PM | #5 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
|
03-11-2023, 07:46 PM | #6 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
|
03-18-2023, 06:05 AM | #7 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
Yeah I looked at this seriously, and it would have to be some where around 5k to even come close to breaking even on it..prices are crazy right now..so you rebuilt it, and then took it back apart again, ??
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
03-18-2023, 01:56 PM | #8 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
well if you wana price stuff from ebay or face book and pay stupid prices then probs this is not for that purpose unless u have the in's
but realy you can buy a 100k v6 car for that |
03-22-2023, 12:04 AM | #9 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
No I wasn’t looking at stupid priced stuff, I really seriously looked into doing this, but eBay is a lot cheaper than the dealer, lol….
I will PM YA
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
03-24-2023, 11:26 AM | #10 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
Sent PM NEED YPUR NUMBER
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
03-28-2023, 01:59 PM | #11 |
Drives: ZL1 Join Date: Apr 2015
Location: Virginia
Posts: 19
|
Any idea what the process would be to bring it back into the US? I have a full drivetrain out of a wrecked car I need to stick in something.
|
03-28-2023, 02:24 PM | #12 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
yes you have to reg it with border customs has to wait a week for them to clear it pay the state tax and send it on its way car was a usa car and has epa sticker on hood still
|
05-08-2023, 10:30 AM | #13 |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,156
|
Is this still for sale?
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
05-08-2023, 01:34 PM | #14 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
|
|
|
|
|