01-25-2024, 11:11 AM | #29 |
Tri-County Camaro SWFL
|
ZL1 6 piston brakes getting installed shortly. They were black. Had UNIT F14 POWDERCOATING powdercoat them to look like the stock 1LE brakes.
__________________
|
01-25-2024, 11:12 AM | #30 |
Anthony S
Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021
Location: Chiefland, FL
Posts: 889
|
Dang! Those came out looking fresh!
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181 Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links. |
01-25-2024, 12:13 PM | #31 |
Tri-County Camaro SWFL
|
Thanks, that's their approval picture before they ship. They killed it with the look. It's been a super easy process with great communication. I asked them to use Z06 vented pistons during the rebuild as well.
__________________
|
01-25-2024, 05:43 PM | #32 |
Tri-County Camaro SWFL
|
Finished product
__________________
|
01-25-2024, 05:47 PM | #33 |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 881
|
Who ever did that coating, did a jam up job! Gonna look sweet!
__________________
|
01-29-2024, 01:33 PM | #34 |
Anthony S
Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021
Location: Chiefland, FL
Posts: 889
|
vented pistons too? Looking good! That powdercoat does look sweet.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181 Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links. |
02-01-2024, 05:13 PM | #35 |
Tri-County Camaro SWFL
|
Unit F14 Powder Coating in Plano Texas.
Just received them the other day. They did a great job. Pricey but they did exactly what I wanted.
__________________
|
05-04-2024, 03:55 PM | #36 |
Tri-County Camaro SWFL
|
Brakes finally needed to be changed so I installed the ZL1 calipers and some stainless steel goodridge lines. Did OEM pads up front and Hawk DCT30s on the rear. Had the Hawks sitting around for years. Came out perfectly, looks like they are OEM 1LE brakes.
__________________
|
06-02-2024, 04:02 PM | #37 |
Tri-County Camaro SWFL
|
Finally got my Bald Eagle Machine front crash bar installed. Got to admit I've been putting this on the back burner for some reason. I didn't enjoy taking off my bumper for the twin install but it seemed much easier this time around. It required zero trimming of the bumper and cleared the drag race AGP intercooler. Here's the Pic of it installed. It's way lighter than the. OEM piece.
__________________
|
06-03-2024, 06:44 AM | #38 |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 881
|
That looks really good. That is a fine piece He had made.
__________________
|
06-03-2024, 11:43 AM | #39 |
Tri-County Camaro SWFL
|
It's very nice. I had it sitting in the box in my garage for months now. Didn't even realize how heavy the OEM bar is. I was skeptical of it clearing the intercooler and by the looks of the pictures. It fits perfectly with room to spare.
__________________
|
|
|
|
|