Eagle Eye Headlights with VLED Turn Signals - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CG'sSS · 09-01-2010, 02:27 PM

Quote:

Originally Posted by erk5000

So it seems as this mod is only for non-RS models... Correct me if I'm wrong. Like I said before, my turn signal has 3 wires. Black, blue, and brown/purple. My halo red wire power source is spliced into the brown/purple wire. The resistor is spliced into the blue wire and the other end in the black wire as you can see in my picture. My parking/turn signals come on once I flip the light switch To the right once or all the way & also when I press the fog light button.

There it is my question is answered. When I first read your OP it seem like you only had the same 2 wires as I did. But now i see that you have the 3rd wire (brown/purple). Well i am verified that i can modify my plugs to run that a 3rd wire through to make this mod work for me. Appreciate you guys keeping up with my post. THANK!!!

erk5000 · 09-01-2010, 02:46 PM

No problem. Keep me updated on how it turns out for you.

GreenMonster · 09-01-2010, 06:37 PM

i have a question would i need to remove my grill to install the turning signal lights or can it be done from the hood or under the car ?

erk5000 · 09-01-2010, 08:51 PM

Quote:

Originally Posted by GreenMonster

i have a question would i need to remove my grill to install the turning signal lights or can it be done from the hood or under the car ?

You do not have to remove your grill. You can install them with your hood just open.

GreenMonster · 09-01-2010, 09:27 PM

Quote:

Originally Posted by erk5000

You do not have to remove your grill. You can install them with your hood just open.

Excellent....!

Luttinger · 09-02-2010, 08:40 AM

And how do you get a 3rd wire into the plug?

CG'sSS · 09-02-2010, 11:18 AM

Quote:

Originally Posted by Luttinger

And how do you get a 3rd wire into the plug?

The plug is 2 pieces the one were the wires run in and the other is were the bulb is pluged into. When you do this you will see the 3 prongs on the bulb piece and the 3 female inlets on the wire side. The middle one is not being used. I took off the reed cover on the wire side and made a hole (heated the tip of an ice pick). I am currently searching on parts to run a wire in to this middle hole. I'll post pictures when I get home to give you a better visual of what I am talking about.

EDIT: I will be using this spare middle inlet to run a 3rd wire with a constant 12V source from my headlights so that the white LEDs come on as they should with my driving lights.

erk5000 · 09-02-2010, 12:43 PM

That's a smart idea CG'sSS.

Luttinger · 09-03-2010, 03:30 AM

Let us know the outcome.

CG'sSS · 09-03-2010, 03:47 AM

Alright fellas took me about an hour or so, just taking my time so I wouldnt blow anything up and taking pictures for everything I did.

here are the pictures:

LEFT SIDE

RIGHT SIDE

CG'sSS · 09-03-2010, 03:54 AM

Videos of finished installation. Just click on picture to take you to the video in photobucket.

erk5000 · 09-03-2010, 06:08 AM

CG'sSS, that is an amazing job you did! Big props to you brother!

Support@OracleLights.com · 09-03-2010, 09:08 AM

Nice install and thank you for posting pictures! This will help a lot of people out when trying to install the switchbacks!

Luttinger · 09-03-2010, 02:24 PM

But the turn signal is quite to less.

09-01-2010, 06:37 PM	#59
GreenMonster Its all about the U Drives: 2010 SGM Join Date: Mar 2010 Location: Miami Posts: 1,671	i have a question would i need to remove my grill to install the turning signal lights or can it be done from the hood or under the car ? __________________ C5.SFC5//FacebookSFC5\\SFC5.TK

09-02-2010, 08:40 AM	#62
Luttinger Drives: Camaro SS/RS Join Date: Sep 2009 Location: Germany/near Munich Posts: 152	And how do you get a 3rd wire into the plug? __________________ Camaro SS/RS, summit white, Afterburner Taill., GMPP exhaust, 22inch Forgiato Inferno, T-Rex Grille, KW V1, RK Carbon Diffusor...

09-03-2010, 03:30 AM	#65
Luttinger Drives: Camaro SS/RS Join Date: Sep 2009 Location: Germany/near Munich Posts: 152	Let us know the outcome. __________________ Camaro SS/RS, summit white, Afterburner Taill., GMPP exhaust, 22inch Forgiato Inferno, T-Rex Grille, KW V1, RK Carbon Diffusor...

09-03-2010, 03:47 AM	#66
CG'sSS Drives: 2010 2SS/RS and 1985 L98 Corvette Join Date: Sep 2008 Location: Buckeye, AZ Posts: 94 View My Garage	Alright fellas took me about an hour or so, just taking my time so I wouldnt blow anything up and taking pictures for everything I did. here are the pictures: LEFT SIDE RIGHT SIDE __________________ Since June 19, 2009 Owns: 2010 Camaro 2SS/RS IBM w/ SIM Rally Stripes w/ SIM GRFX Still Owns: 1985 Corvette

09-03-2010, 03:54 AM	#67
CG'sSS Drives: 2010 2SS/RS and 1985 L98 Corvette Join Date: Sep 2008 Location: Buckeye, AZ Posts: 94 View My Garage	Videos of finished installation. Just click on picture to take you to the video in photobucket. __________________ Since June 19, 2009 Owns: 2010 Camaro 2SS/RS IBM w/ SIM Rally Stripes w/ SIM GRFX Still Owns: 1985 Corvette

09-01-2010, 02:46 PM	#58
erk5000 Drives: 2010 Camaro 2SS L99 SIM Join Date: Feb 2010 Location: Oceanside, CA Posts: 1,036	No problem. Keep me updated on how it turns out for you.

09-02-2010, 12:43 PM	#64
erk5000 Drives: 2010 Camaro 2SS L99 SIM Join Date: Feb 2010 Location: Oceanside, CA Posts: 1,036	That's a smart idea CG'sSS.

09-03-2010, 06:08 AM	#68
erk5000 Drives: 2010 Camaro 2SS L99 SIM Join Date: Feb 2010 Location: Oceanside, CA Posts: 1,036	CG'sSS, that is an amazing job you did! Big props to you brother!

09-03-2010, 09:08 AM	#69
Support@OracleLights.com Drives: www.CamaroLighting.com Join Date: May 2010 Location: New Orleans, LA Posts: 3,245	Nice install and thank you for posting pictures! This will help a lot of people out when trying to install the switchbacks!

09-03-2010, 02:24 PM	#70
Luttinger Drives: Camaro SS/RS Join Date: Sep 2009 Location: Germany/near Munich Posts: 152	But the turn signal is quite to less. __________________ Camaro SS/RS, summit white, Afterburner Taill., GMPP exhaust, 22inch Forgiato Inferno, T-Rex Grille, KW V1, RK Carbon Diffusor...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eagle Eye Headlights with HIDs	erk5000	Cosmetics and Lighting Modification Discussions	234	03-03-2013 11:29 PM
new eagle eye halo headlights	tallmantony	Cosmetics and Lighting Modification Discussions	51	01-29-2012 09:11 PM
Photoshop Request: Tinted Headlights & Foglights	SamSS	Camaro Photoshops / Renderings Forum	13	02-22-2010 12:35 AM
Turn signals / parking lights	Becustom	Cosmetics and Lighting Modification Discussions	4	09-09-2009 09:53 PM
I can see!	The_Blur	Off-topic Discussions	31	07-01-2009 02:19 AM