Any other members in Hawaii? - Page 81 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tterb0331 · 06-11-2011, 01:49 PM

Yeah, that's what my friends back in Hawaii mentioned. I noticed when you are looking for a specific type of vehicle, you tend to see a lot of them, vice when you're not paying attention. I didn't realize there were so many tacomas in Hawaii until I had one...

PMO is going to have a busy time starting next week, things are always a mess when 2/3 returns. Hope the guys don't give y'all too much hassle, ha.

When do they do the car show in aikahi? Is it the first Saturday of every month?

tterb0331 · 06-12-2011, 03:35 AM

Being a k9 officer would be a nice ass job.

I was with 1/3 for 4.5 years, just cross decked to 2/3 forbthis deployment, and I'm pretty sure the entire base knows 2/3 for being just that... Turds. They really aren't that bad on deployment, but they know how to party.

Thanks for the link. I'll be seeing you around soon.

taz · 06-12-2011, 04:01 AM

Ugh, accident in Hawaii Kai backing up traffic. Gave up and went out to dinner instead. Hope a good crowd at Mililani. Was heading out there before the accident backed everyone up.
Taz

808Camaro · 06-14-2011, 02:03 PM

I'm in with Craig!!! Thats 17 and 18 so we would need 3 more....to make 21

Hawaii_Subs · 06-14-2011, 02:22 PM

You guys are bad influences.

I put down my deposit, so add another name to that list

~James

silver96camaro · 06-18-2011, 03:08 PM

i've had my car since january and only been out once. i'd love to get out. if not today then maybe plan something for next weekend?

tterb0331 · 06-22-2011, 12:03 AM

Finally have internet up and running so you should see me on here a bit more often.

I got the Solo Performance High Flow Cats installed today, they sound amazing, my grin is even bigger.

808Camaro · 06-23-2011, 12:30 PM

Sorry to hear that Craig. Hope things work out for you...

Dean

Kreature · 06-23-2011, 08:59 PM

craig, I wouldnt mind helping you out on your install, just let me know when and ill try my best to guide you through the process.
I remember it took me the whole day because the video that AAC has of the bumper removal is wrong. There are actually 4 bolts to the side that hold the front bumper onto the fender instead of the 3 that AAC shows. I spent countless hours trying to figure out why the hell it wouldnt come off. I figured out later that i was missing one and i finally got it off(i got frustrated at one point where i thought about just yanking the dam thing off). Then, theres the headlight removal which is a PIA and that's a whole another story that i wont go into. Those were the only two time consuming problems that i had during my installation, hopefully it shouldn't take more than a few hours.

sting808 · 06-23-2011, 09:46 PM

Quote:

Originally Posted by Haole

Thanks, I just got them delivered to my door. I also saw the videos on the removal. My only problem is I don't have many tools. Just the basic craftsman socket set. The box is staring at ne right now but I'm fighting off the urge to open it until I'm doing the install.

I can help remove the bumper. The headlamp assembly looks like a PITA.

Torx bit, 7 - 12?mm sockets, body fasteners, and bumper comes off pretty easy, if you take off the tires. I tried it with tires on and can't see/reach bolts plus front rims are 20x10. Turning them doesn't help.

10-20 minutes to lift car and pull off bumper. I don't know about the rest of the steps. I can bring a jack, stands, tire chocks, etc. Have electrical tools and multimeter. Assuming the kit comes complete with all hardware...

Kreature · 06-26-2011, 04:08 AM

sorry for the late response, been pretty busy with work. ive got some time next weekend and maybe the weekend after that. i got a bunch of tools at home so you wont need to worry about that. just let me know when your ready.

Kreature · 06-26-2011, 04:41 AM

On a side note, can anyone recommend me an alignment shop thats familiar with "timing the bushings".

sting808 · 06-26-2011, 08:32 AM

Quote:

Originally Posted by Kreature

On a side note, can anyone recommend me an alignment shop thats familiar with "timing the bushings".

Island brake and alignment in Aiea. Hekaha warehouse area. A lot of the scca guys go there.

Kreature · 06-26-2011, 06:39 PM

Quote:

Originally Posted by sting808

Island brake and alignment in Aiea. Hekaha warehouse area. A lot of the scca guys go there.

thanks, im gonna give them a call.

06-11-2011, 01:49 PM	#1121
tterb0331 Chuck Thunder Drives: 2011 2SS Join Date: Jun 2011 Location: Oahu, Hawaii Posts: 73 View My Garage	Yeah, that's what my friends back in Hawaii mentioned. I noticed when you are looking for a specific type of vehicle, you tend to see a lot of them, vice when you're not paying attention. I didn't realize there were so many tacomas in Hawaii until I had one... PMO is going to have a busy time starting next week, things are always a mess when 2/3 returns. Hope the guys don't give y'all too much hassle, ha. When do they do the car show in aikahi? Is it the first Saturday of every month? __________________ "YAZZLE" USMC CAI, Inc Cold Air Intake Solo Performance High Flow Cats Flowmaster AT Catbacks QTP Electric Cutouts AAC Dual Color Halos, Halo Foglights (awaiting install)

06-12-2011, 03:35 AM	#1122
tterb0331 Chuck Thunder Drives: 2011 2SS Join Date: Jun 2011 Location: Oahu, Hawaii Posts: 73 View My Garage	Being a k9 officer would be a nice ass job. I was with 1/3 for 4.5 years, just cross decked to 2/3 forbthis deployment, and I'm pretty sure the entire base knows 2/3 for being just that... Turds. They really aren't that bad on deployment, but they know how to party. Thanks for the link. I'll be seeing you around soon. __________________ "YAZZLE" USMC CAI, Inc Cold Air Intake Solo Performance High Flow Cats Flowmaster AT Catbacks QTP Electric Cutouts AAC Dual Color Halos, Halo Foglights (awaiting install)

06-22-2011, 12:03 AM	#1127
tterb0331 Chuck Thunder Drives: 2011 2SS Join Date: Jun 2011 Location: Oahu, Hawaii Posts: 73 View My Garage	Finally have internet up and running so you should see me on here a bit more often. I got the Solo Performance High Flow Cats installed today, they sound amazing, my grin is even bigger. __________________ "YAZZLE" USMC CAI, Inc Cold Air Intake Solo Performance High Flow Cats Flowmaster AT Catbacks QTP Electric Cutouts AAC Dual Color Halos, Halo Foglights (awaiting install)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Welcome for new members. Come say hello!	Moose	New Member Introductions	1574	01-17-2024 08:07 AM
How many forum members does it take to change a lightbulb?	stovt001	Off-topic Discussions	28	05-26-2009 09:17 PM
# Of Members	TAG UR IT	Site Related Announcements / Suggestions / Feedback / Questions	25	03-16-2008 11:47 AM
1000 Members Strong! Welcome to Eleven11.	TAG UR IT	Off-topic Discussions	14	07-10-2007 10:27 PM

06-12-2011, 04:01 AM	#1123
taz Taz Drives: 2010 RS/SS Camaro Join Date: Aug 2008 Location: Honolulu, Hawaii Posts: 537 View My Garage	Ugh, accident in Hawaii Kai backing up traffic. Gave up and went out to dinner instead. Hope a good crowd at Mililani. Was heading out there before the accident backed everyone up. Taz

06-14-2011, 02:03 PM	#1124
808Camaro Drives: 1969 SS Coupe 2011 2SS Convertible Join Date: Jun 2009 Location: Honolulu, HI Posts: 114 View My Garage	I'm in with Craig!!! Thats 17 and 18 so we would need 3 more....to make 21

06-14-2011, 02:22 PM	#1125
Hawaii_Subs Drives: 2010 IBM SS/RS Join Date: Nov 2009 Location: Kapolei, HI Posts: 87	You guys are bad influences. I put down my deposit, so add another name to that list ~James

06-18-2011, 03:08 PM	#1126
silver96camaro Drives: 2011 cyber grey metallic camaro ls Join Date: Jan 2011 Location: honolulu, hi Posts: 222 View My Garage	i've had my car since january and only been out once. i'd love to get out. if not today then maybe plan something for next weekend?

06-23-2011, 12:30 PM	#1128
808Camaro Drives: 1969 SS Coupe 2011 2SS Convertible Join Date: Jun 2009 Location: Honolulu, HI Posts: 114 View My Garage	Sorry to hear that Craig. Hope things work out for you... Dean

06-23-2011, 08:59 PM	#1129
Kreature Drives: Summit White 1LT/RS Join Date: Jun 2009 Location: Honolulu,Hawaii Posts: 389	craig, I wouldnt mind helping you out on your install, just let me know when and ill try my best to guide you through the process. I remember it took me the whole day because the video that AAC has of the bumper removal is wrong. There are actually 4 bolts to the side that hold the front bumper onto the fender instead of the 3 that AAC shows. I spent countless hours trying to figure out why the hell it wouldnt come off. I figured out later that i was missing one and i finally got it off(i got frustrated at one point where i thought about just yanking the dam thing off). Then, theres the headlight removal which is a PIA and that's a whole another story that i wont go into. Those were the only two time consuming problems that i had during my installation, hopefully it shouldn't take more than a few hours.

06-26-2011, 04:08 AM	#1131
Kreature Drives: Summit White 1LT/RS Join Date: Jun 2009 Location: Honolulu,Hawaii Posts: 389	sorry for the late response, been pretty busy with work. ive got some time next weekend and maybe the weekend after that. i got a bunch of tools at home so you wont need to worry about that. just let me know when your ready.

06-26-2011, 04:41 AM	#1132
Kreature Drives: Summit White 1LT/RS Join Date: Jun 2009 Location: Honolulu,Hawaii Posts: 389	On a side note, can anyone recommend me an alignment shop thats familiar with "timing the bushings".