07-30-2012, 01:31 AM | #57 |
Drives: Camaros................ Join Date: Oct 2006
Location: Seven Fields, PA (Pittsburgh)
Posts: 4,523
|
Your ZL1 has a comprehensive warranty.
While we certainly don't want you upset with the car - and we apologize for the fact that there seems to be an issue with the insert, know that we cover things such as this with the warranty that comes with the ZL1.
__________________
|
07-30-2012, 10:13 AM | #58 |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Took the car to the dealership this morning. They didn't bat an eye. Just said "we're going to place this order now we just don't know how long it will take to get the part since this is a difficult part to get. It could be a week, a month, or six months"
I told them that was unacceptable. I came home and called Chevy customer service and informed them of my extreme displeasure and they said they would call the dealership to work with them on expediting the part. I was given a case number and my reps direct contact info and to expect a call later today. We also went over acceptable fixes. I told them my first and most important was a direct replacement. A second acceptable was a temporary painted one while they wait for the exposed. And the least acceptable was a painted replacement with a $600 refund. We'll see what happens.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
07-30-2012, 10:16 AM | #59 |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Oh and thanks to fbodfather and Brandon for replying to my PMs regarding the matter. I know you guys are busy.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
07-30-2012, 10:51 AM | #60 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,936
|
I doubt they'll do this, but even if they offered I would leave it alone until the replacement is available. The more they touch your car, the more opportunity for something else to be messed up. Hopefully, the part will come in soon.
|
07-30-2012, 10:59 AM | #61 |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
I know that they wouldn't do that one most likely. I just wanted to stress how much a direct replacement is on the importance scale and how least I wanted to swap a painted one in there even with a refund.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
07-30-2012, 11:38 AM | #62 | |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Quote:
Brandon Chevrolet Customer Service
__________________
For information on the GM Privacy Statement, please visit http://www.gm.com/privacy-statement.html
|
|
07-30-2012, 12:14 PM | #63 |
Drives: 2017 Jeep Rubicon, 2016 Z06 Join Date: Jun 2012
Location: Abbotsford B.C. Canada
Posts: 547
|
The best time to inspect the insert would be when it is hot as there will be some expansion and if there are any fissures it will be more noticeable. When the insert is cold it would be more difficult to see any small fissures as they would be closed as the product would be contracted.
I hope the designers knew what they were doing when using dissimilar materials on the hood, being from the Fibre industry I have seen some poor placement of the products. On another note, it would almost be impossible for the part to crack after it was cured, this happened as it was made, probably a poor release from the mold. If your part is good now you are golden. |
07-30-2012, 12:29 PM | #64 | |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Quote:
Good to know man. Like I said, I found mine with the car cold (so to speak) sitting in a hot garage. I also went back and looked at pics right after delivery from the dealership and you can see the cracks/blemishes there and the car was driven for all of 5 minutes.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
|
07-30-2012, 03:37 PM | #65 |
Perma Grinning
Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012
Location: Schaumburg, IL
Posts: 452
|
So a post about a damaged part started on a SUNDAY . . . get THREE pages of complaints . .
The dealer is ordering you a new insert and this STILL isn't good enough? Good grief . . . some people are NEVER happy I cannot believe that you bothered Scott with such a issue ON A SUNDAY! It's not like the dealer said they would not do anything . . . I just cannot understand the over the top expectations of today's car buyers . . sorry . . |
07-30-2012, 03:56 PM | #66 | |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Quote:
First, I found this on a Sunday made a post about it and PM'd two people who have the means to make sure its corrected. Second, the three pages are full of people checking their cars and reporting theirs are ok and in one other case that they have significant more damage. And in the first page there are people telling me that the pictures are not showing up. Third, these are obvious manufacturer errors, from the part supplier, that should have been caught during QC on the car. If it wasn't checked for QC, why was the car held for a month after it was built until it was shipped. Fourth, we dropped a significant amount of money on these cars and they should be as close to perfect as possible. I don't see people with base model vettes complaining of issues like this and they drop similar amounts of cash. Fifth, If this is the start of an issue GM needs to know about it to either A. find a new part supplier or B. make sure that the deployed fleet and future ZL1s don't suffer from the same defect. GM asked me what an acceptable remedy was. NOT the dealer. My dealer has been great and has done their job. I was talking with GM to let them know about a potential issue. They asked me what I wanted as an ultimate remedy. Sixth, if you read the thread you would have seen that I was happy with what the dealer did for me. They straight up ordered the part with no question nor hesitation. What I was upset about was that there was no time table given on when to expect a repair (Would a six month wait be acceptable to you?) nor could they tell me if the cracks would get worse with driving effectively grounding the car. Again, would that be acceptable to you? Seventh, making a post and sending Scott a one PM on a Sunday does not constitute "bothering". If I had barraged him with PMs and incessant nagging that would be bothering. Eighth, I posted a sincere thank you to both Scott and Brandon (Chevy Customer Service), to which Brandon replied. Thank you. Good day.
__________________
FOR SALE: 2013 ZL1 Message me if interested Last edited by G-Oil Guy; 07-30-2012 at 04:18 PM. Reason: added an 8th point. |
|
07-30-2012, 04:03 PM | #67 |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
I can't understand having such issues and delays with the hood inserts back in 2012, then fast forward to 2013 models and I have to deal with having a huge 1.5" crack in mine from normal use of what I can only assume is from opening and closing the hood.... I think it is something that should be brought to everyone's attention that this is happening, cause it shouldn't be. If G-Oil hadn't already created this post this weekend I would have. If my dealer's service guy calls me back and states they will order a new insert then I will be perfectly happy, and hopefully I'll have better luck with a new one. The thing I'm worried about, and others are probably worry about is getting the run around from our dealers on this type of issue.
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
07-30-2012, 04:09 PM | #68 | |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Quote:
I got to chatting with Maureen while ordering my new floor mats and she said she tried to order someone an insert because they had the painted one and the GM people requested photos of the damaged one. She also looked at some stuff on her end (she didn't tell me what) and mentioned that in her opinion she thought they should be able to expedite one to me quickly. So we'll see what happens.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
|
07-30-2012, 04:57 PM | #69 | |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Quote:
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
|
07-30-2012, 06:40 PM | #70 |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Just got back from the dealership. Took like 30min, but after the body shop guy talked to enough of the right people they are going to order in a replacement ECF insert through warranty (no ETA for the part). They are also going to have their vinyl guy come and repair their tech's mishap with my dash when he was installing the footwell lighting kit. My poor car, I haven't even had it a week yet.
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
|
|
Tags |
damaged insert, defects, exposed carbon fiber, insert cracked |
|
|