Looking to see if someone has some parts?

[brandon.rush1]

Hey everyone..just checking to see if anyone has any nuts and bolts for the under bumper trim. The part numbers are 11610747 and 11610748.. I really dont want to spend 70$ for 10 of these.. thanks for any help

[infernometallicSS]

They are really Spendy even gmparthouse. Let me guess you ripped the air valance off. It wouldn't be back but there is like 15 of those things I think.

[Iwantone2]

The "bolts" on mine fell off...went to Holmes Depot (where the homies work) and got some bolts, nuts, and washers for about 15 bones. Until I can justify spending $70+ for the GM ones, I hope that I don't hit anything serious!

[brandon.rush1]

Originally Posted by infernometallicSS

They are really Spendy even gmparthouse. Let me guess you ripped the air valance off. It wouldn't be back but there is like 15 of those things I think.

surprisingly I didn't but it looks like the previous owner did lol.. It's ridiculous how these things are like $7 each to replace..

[brandon.rush1]

Originally Posted by Iwantone2

The "bolts" on mine fell off...went to Holmes Depot (where the homies work) and got some bolts, nuts, and washers for about 15 bones. Until I can justify spending $70+ for the GM ones, I hope that I don't hit anything serious!

Lol... yea thats probably what I'm gonna have to do.. how can GM get away with charging so freaking much..

[Mongoose03]

http://parts.nalleygmc.com/products/.../11610747.html

http://parts.nalleygmc.com/productSe...hTerm=11610748

[brandon.rush1]

Originally Posted by Mongoose03

http://parts.nalleygmc.com/products/.../11610747.html

http://parts.nalleygmc.com/productSe...hTerm=11610748

I know where to find it but I refuse to pay that price...

[KnightRiderSS]

You are stuck if your want OEM....

nylon bolts and washers at any parts store..

I only lost one...but now that I know how much they cost I check them for tightness often...

[brandon.rush1]

Originally Posted by KnightRiderSS

You are stuck if your want OEM....

nylon bolts and washers at any parts store..

I only lost one...but now that I know how much they cost I check them for tightness often...

i guess home depot it will be unless i can find a camaro laying in a junkyard somewhere that may have some

[infernometallicSS]

Maybe if I understood the purpose of that cheap plastic piece it would be easier to drop the cash to buy break away bolts. Does anybody know the true purpose of it?

[clg_98ta]

You might give these guys a call... I buy a lot of the GM "Christmas Tree" type connectors from them.

www.clipsandfasteners.com

Nothing came up when I searched for your part number, but they might know an alternate part# if you call them. Or you can find something with the same dimensions on their site that'll work. With any part number you find, try an EBay search to see if you can buy a bag of 50 for $8.00 (I've done this for trim clips a few times).

http://www.clipsandfasteners.com/Bum...t_p/a11615.htm

[Chrisrp454]

Yes i do, i caught mine on one of the stone blocks the spike down, i did not see the steal rebarb sticking up above it at my mother's dr office. Well when i backed out it pulled the front of the fascia out above the parking light on the side, ripped the hole out where it bolts on. On the picture below its the hole above the parking light. I had glued mine with gorilla glue.
So that is what the break away ones are for, so the bottom rubber piece pulls off and not the fascia connections.

Originally Posted by infernometallicSS

Maybe if I understood the purpose of that cheap plastic piece it would be easier to drop the cash to buy break away bolts. Does anybody know the true purpose of it?

[infernometallicSS]

I know the purpose of the breakaway connectors. Just not the purpose of the rubber piece.

[K32 Camaro]

The rubber piece splits the air so there is less lift at high speeds.