02-09-2014, 07:59 PM | #1 |
Drives: 2011 camaro 1ss synergy green Join Date: Oct 2013
Location: Augusta, GA
Posts: 7
|
Question about interior trim from RPI.
I'm thinking about getting this
I have a camaro 1SS http://www.rpidesigns.com/shop/item.aspx?itemid=3133 however it states in bold: We have found out through the years that if your Camaro has felt door liner inserts, that our holes will not line up with your holes. You will need to drill new holes. If you have standard door panels, you will be fine, simply bolt into place. This might seem like a stupid question but it's my understanding that "felt" is fabric. I want to make sure I can install these before I buy them. Here is the side panel of my car. http://imgur.com/ZF9ASxV and here's a closer pic http://imgur.com/Uj6tnaf Can anyone tell me if I will be able to install these? Last edited by Kurmit909; 02-09-2014 at 08:23 PM. |
02-09-2014, 08:16 PM | #2 |
Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011
Location: The Central Coast
Posts: 909
|
I installed them in the RS, it was very simple.
__________________
Past: 2011 RS, 2013 ZL1 Current: 2016 2SS |
02-09-2014, 08:22 PM | #3 |
Drives: 2011 camaro 1ss synergy green Join Date: Oct 2013
Location: Augusta, GA
Posts: 7
|
okay and you had the same panels I have now?
|
02-09-2014, 08:41 PM | #4 |
2010 2SS RS
Drives: 2010 2SS RS (L99) Join Date: Aug 2013
Location: Wilmington, DelaWHERE
Posts: 749
|
Looks great!
Are those the stock speaker covers?
__________________
~ Build Thread | 371HP & 390 TQ
Performance Mods: K&N Cold Air Intake | Pypes Cat-Back Exhaust | Aluminum Paddle Shifters | VaraRam Wedge | Cross Drilled/Slotted Rotors | Hawk HPC Pads | M.M. Ported Throttle Body | Kooks 1 7/8 Headers w/ High Flow Cats | Dyno Tune @ RPM Cosmetic Mods: Rally Stripes (style1, style2, style2.2) | Splitter | Painted Calipers | Door Projector Lights | Front-Emblem Delete | Cup Holder Lighting | Quarter Window Covers | Phantom Grille | Ghosted Side Markers | Tinted Fog Lights | ZL1 Rockers | Tail Light Bezels |
02-09-2014, 08:54 PM | #5 |
Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011
Location: The Central Coast
Posts: 909
|
Yes, I had the fabric, just be careful when removing the fabric because there is sound absorbing material underneath that can tear easily
__________________
Past: 2011 RS, 2013 ZL1 Current: 2016 2SS |
02-09-2014, 08:55 PM | #6 |
Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011
Location: The Central Coast
Posts: 909
|
Thanks, and yes they are
__________________
Past: 2011 RS, 2013 ZL1 Current: 2016 2SS |
02-09-2014, 09:02 PM | #7 |
Drives: 2011 camaro 1ss synergy green Join Date: Oct 2013
Location: Augusta, GA
Posts: 7
|
Awesome! thanks!
|
02-09-2014, 09:35 PM | #8 |
Smoked by a GIRL
|
I installed those in my 1SS. Not all the holes line up but with a little work, it fits just fine
__________________
2014 2SS/RS Summit White w/ IOM interior "Powder 2.0"
|
02-10-2014, 08:48 AM | #9 |
Drives: 2012 Camaro SS Best Run - 10.93@125 Join Date: Feb 2012
Location: San Tan Valley, Arizona
Posts: 515
|
I too installed them on my 1SS. I wasn't very pleased with the overall fit of the panels. I can honestly say that I plan on getting the entire GM door panels later and having panels that fit nicely.
__________________
|
|
|
|
|