Transformers 3 spoiler? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

StevenBateman · 06-10-2014, 08:39 AM

ZL1 and Z/28 spoilers look damn good, link me to somewhere with good prices?

CamaroSkooter · 06-10-2014, 08:52 AM

I really thought this was going to be a thread about some inside information on the upcoming movie, and then I thought, "but the next one is the fourth movie," and wondered if this was just a really old thread resurrected.

Turns out, I was completely wrong

squat · 06-10-2014, 09:24 AM

Quote:

Originally Posted by CamaroSkooter

I really thought this was going to be a thread about some inside information on the upcoming movie, and then I thought, "but the next one is the fourth movie," and wondered if this was just a really old thread resurrected.

Turns out, I was completely wrong

Yes, yes you were sir.

CamaroSkooter · 06-10-2014, 09:35 AM

It's early, and I haven't had any caffeine yet.

hrpiii · 06-10-2014, 02:53 PM

looks like someone attached a park bench to the trunk.

BlckOut · 06-15-2014, 10:23 PM

actually one of the most complimented mods I've done. I got my high wing off ebay and saved a bunch too!

Name: ImageUploadedByTapatalk1402889018.407707.jpg
Views: 796
Size: 126.6 KB

Name: ImageUploadedByTapatalk1402889018.407707.jpg
Views: 796
Size: 126.6 KB

Name: ImageUploadedByTapatalk1402889035.189359.jpg
Views: 806
Size: 206.9 KB

StevenBateman · 06-16-2014, 03:39 PM

Quote:

Originally Posted by BlckOut

actually one of the most complimented mods I've done. I got my high wing off ebay and saved a bunch too!

Attachment 637225

Attachment 637226

I think that looks cool man. Where'd you get the hood?

BlckOut · 06-16-2014, 06:02 PM

Quote:

Originally Posted by StevenBateman

I think that looks cool man. Where'd you get the hood?

thanks! It's from Eric at MPD1 customs

StevenBateman · 06-16-2014, 06:43 PM

Quote:

Originally Posted by BlckOut

thanks! It's from Eric at MPD1 customs

how much did it run you?

BlckOut · 06-17-2014, 09:42 AM

Quote:

Originally Posted by StevenBateman

how much did it run you?

About $500 when I got it I believe

BlckOut · 06-18-2014, 04:18 PM

Quote:

Originally Posted by CreativeDawn

@Blckout

I had the same Quarter Panel GTS Styling Window Louvers you have on your Camaro My first purchase of them I put them on and used my body weight, let the car sit for about 3 hours and decided to take her for a spin. The passenger side popped off on the freeway at night and that was that! I complained and was shit out of luck because the company won't refund you if the tape is not still on the window.

I recently bought the louvers once again and the same damn thing happened....Now i'm stuck with two drivers side quarter window louvers. I complained again and now they're trying to figure out what to do for me. This sucks because i'm out almost 300 dollars. I like your car by the way, good looking vehicle.

I see you have the Technostalgia tail lights installed. I ordered those from Gen5 weeks ago and they haven't responded to any of my emails so now i'm trying to think if I should call my bank. They claim on their website that they're back in stock, but I now feel that they've forgotten to update that red bolt font alert.

I like your spoiler, very sharp and a lot better looking then the GM High Wing Spoiler. I recently ordered the Anvil Notch Spoiler because I like the way it looks with the 5thGen's lines.....Anyways take care!

thanks a ton! I am always had that fear about the side louvers:/ and I would call about the tails again. they are popular so they may be backordered, but they're worth the wait. hope everything works out! and it actually is the GM highwing

haha

06-10-2014, 08:39 AM	#15
StevenBateman Drives: 2011 2SS/RS Join Date: May 2014 Location: Niagara Falls Posts: 732	ZL1 and Z/28 spoilers look damn good, link me to somewhere with good prices? __________________ "Scarlett" the Black Widow BTR Stage 4 Cam, FTI 3600 Stall Converter, GM 3.91 Gears, GPI Intake Mod V2, CAI Cold Air Intake, SLP 25% Underdrive Pulley, LS3 Conversion, PRC Ported/Polished Heads, Stainless Power Long Tubes w/off-road pipes, Borla Atak Cat-Back Exhaust, Tru Cool 40K 482rwhp/425rwtq, Built and tuned by Champion Motors

06-10-2014, 08:52 AM	#16
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	I really thought this was going to be a thread about some inside information on the upcoming movie, and then I thought, "but the next one is the fourth movie," and wondered if this was just a really old thread resurrected. Turns out, I was completely wrong __________________ My VIN = 2G1FK1EJ9A9105017 Build Date: 04-23-2009 according to: http://www.compnine.com/vid.php

06-10-2014, 09:35 AM	#18
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	It's early, and I haven't had any caffeine yet. __________________ My VIN = 2G1FK1EJ9A9105017 Build Date: 04-23-2009 according to: http://www.compnine.com/vid.php

06-15-2014, 10:23 PM	#20
BlckOut mUrDeReD oUt! Drives: 2011 Camaro LT RS V6 Join Date: Feb 2012 Location: Florida Posts: 257 View My Garage	actually one of the most complimented mods I've done. I got my high wing off ebay and saved a bunch too! __________________

06-10-2014, 02:53 PM	#19
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,532	looks like someone attached a park bench to the trunk.