You are browsing camaro5 
 |
|
05-30-2015, 08:07 PM
|
#1 |
|
2012 RS 2ss
Drives: 2018 ZL1 2012 2SS WhippleCharged Join Date: Feb 2012
Location: Kansas
Posts: 414
|
Dual Stripe Heat Extractor Installed Over a Whipple
There is a DYI for the NON Positive Displacement Blower Cars.
Thought I would share the results of putting one over a Whipple . Also haven't seen anyone who added the stripes on the vent. Even Moving the vent back a few inches wasn't enough to clear the Body and Throttle body area. The area under the second and third Hex section has approx. 1/2 to 3/4 inch of material being ground off. Moving the Hole in the Hood forward by an inch may have reduced the amount of mesh being ground for clearance, but I had to start somewhere . There is no way any usable amount of the rain drain was going to fit, so I added an aluminum closeout panel to improve the looks.  Haven't finished yet but needed a break so decided to post current progress. 
__________________
 2018 ZL1 A10 and 2012 2SS RS Whipple-Corsa-RotoFab-ZL1 Diff 3.73 Pfadt ZL Stage 3 Suspension+ |
|
|
|
05-30-2015, 08:32 PM
|
#2 |
|
Flying da helicopter
|
That looks pretty good. I want to do this, but I don't want to have to modify it. I was thinking about ordering the SLP vent which will fit over my SLP supercharger, but it looks like cheap plastic with a big logo on the top.
|
|
|
|
|
05-30-2015, 09:33 PM
|
#3 |
        
Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008
Location: Portland, TN
Posts: 2,952
|
That looks amazing!
__________________
2017 Krypton Green SS 1LE
Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins |
|
|
|
|
05-30-2015, 10:09 PM
|
#4 | |
|
2012 RS 2ss
Drives: 2018 ZL1 2012 2SS WhippleCharged Join Date: Feb 2012
Location: Kansas
Posts: 414
|
Quote:
Curious , what was your impressions going from Whipple to Twins ? Was that a single change or other items at the same time ?
__________________
2018 ZL1 A10 and 2012 2SS RS Whipple-Corsa-RotoFab-ZL1 Diff 3.73 Pfadt ZL Stage 3 Suspension+ |
|
|
|
|
|
05-30-2015, 10:22 PM
|
#5 |
|
Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008
Location: Portland, TN
Posts: 2,952
|
I enjoyed the Whipple more, but I never got a chance to turn up the boost with the twins. Broke the posi in the 9" kit I had when I took it to the track. Never got a quarter mile run in. With the manual trans, the twins sucked to launch. Fell on it's face until it hit boost. Nothing a launch controller couldn't fix. The Whipple is much better for show. No one could even tell I had the turbos. Lots of piping with the turbo setup too.
__________________
2017 Krypton Green SS 1LE
Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins |
|
|
|
|
05-31-2015, 12:38 AM
|
#6 |
  Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
Looks really good with the stripes added! Definitely different from the normal vents. What are you going to do about water getting in though?
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
|
|
|
05-31-2015, 12:38 PM
|
#7 | |
|
2012 RS 2ss
Drives: 2018 ZL1 2012 2SS WhippleCharged Join Date: Feb 2012
Location: Kansas
Posts: 414
|
Quote:
Don't think rain is a problem when the car is rolling down the road. But I'm trying to fashion a Quick install Plexi cover. So if i'm on a trip and need to park outside or putt around town it could be closed off. Work in progress. 
__________________
2018 ZL1 A10 and 2012 2SS RS Whipple-Corsa-RotoFab-ZL1 Diff 3.73 Pfadt ZL Stage 3 Suspension+ |
|
|
|
|
|
05-31-2015, 01:21 PM
|
#8 | |
|
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
Quote:
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
|
|
|
|
06-27-2015, 09:02 PM
|
#9 |
 
Drives: Black with silver stripes and 22s Join Date: Aug 2010
Location: Bonnyville Alberta
Posts: 116
|
Has anyone tried this with a magnuson supercharger yet? Only reason I ask is I have one sitting here. Just worried it won't fit.
|
|
|
|
|
06-28-2015, 06:41 AM
|
#10 |
 
|
Nice job !
|
|
|
|
|
06-28-2015, 10:11 AM
|
#11 | |
|
2012 RS 2ss
Drives: 2018 ZL1 2012 2SS WhippleCharged Join Date: Feb 2012
Location: Kansas
Posts: 414
|
Quote:
SLP makes one that fits over their Supercharger , might check it out.
__________________
2018 ZL1 A10 and 2012 2SS RS Whipple-Corsa-RotoFab-ZL1 Diff 3.73 Pfadt ZL Stage 3 Suspension+ |
|
|
|
|
|
05-02-2016, 02:01 PM
|
#12 |
|
2011 2SS LS3 Auto
Drives: 2011 Camaro SS Join Date: Feb 2015
Location: Phoenix, AZ
Posts: 63
|
Hey guys do you know if the SLP Part #: 620032 will work without "modifications"? They devised it to be shallower to accommodate thier supercharger on 2014 + models. I have a TVS 2300 and I'm installing it on a 2011 hood.
__________________
2011 2SS LS3 Auto Blue Camaro
Rotofab CAI, Magnuson TVS 2300 & OD cog, L99> now LS3 with custom cam, 1000 cc injectors for E85, flexfuel & secondary fuel pump, ZL1 tank fuel pump, ADM FPCM, Kooks LT headers with high-flow cats, Magnaflow 3" exhaust, catch can, Alkycontrol methanol system, Z28 wheels with Nitto NT05 tires, BMR cradle bushings, sway bars, trailing arms, adjustable toe rods, end links, lower control arms, and 1.25 drop springs, Aero force gauge, wideband sensor gauge in two-hole pillar pod. E85 - 675 HP/643 Tq & 91 - 604 HP/579 Tq, 10.6s ET on MT slicks at 132 mph. |
|
|
|
|
05-03-2016, 01:42 PM
|
#13 |
Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE Join Date: Feb 2014
Location: The Left lane PHOENIX AZ
Posts: 2,626
|
Outstanding work .
__________________
OLD GUY FLYING FAST AND LOW
|
|
|
|
|
|
|
|
 |
|
|
