07-12-2015, 10:40 PM | #1 |
Drives: 2011 2SS/RS Join Date: May 2014
Location: Niagara Falls
Posts: 732
|
Purple headlight colour?
So I have OEM halo headlights installed on my car and have had them since about the beginning of May and haven't had any issues with them until recently. The driver's side would tend to not turn on automatically, but then when I'd flick the auto lights off then on it would come on. Now just recently the light itself is a light purple colour instead of the OEM colour. Could someone possibly shed some light on my dilemma please!
__________________
"Scarlett" the Black Widow
BTR Stage 4 Cam, FTI 3600 Stall Converter, GM 3.91 Gears, GPI Intake Mod V2, CAI Cold Air Intake, SLP 25% Underdrive Pulley, LS3 Conversion, PRC Ported/Polished Heads, Stainless Power Long Tubes w/off-road pipes, Borla Atak Cat-Back Exhaust, Tru Cool 40K 482rwhp/425rwtq, Built and tuned by Champion Motors |
07-12-2015, 10:42 PM | #2 |
Account Suspended
Drives: 2015 Redhot 1LE Join Date: Feb 2013
Location: Westchester NY
Posts: 1,409
|
The light is failing or you have an electrical problem/harness unplugging slowly
|
07-12-2015, 11:00 PM | #3 |
Drives: 2011 2SS/RS Join Date: May 2014
Location: Niagara Falls
Posts: 732
|
Figured it was something like that. What a PITA to do though, hate having to remove the whole bumper to get to the headlights..
__________________
"Scarlett" the Black Widow
BTR Stage 4 Cam, FTI 3600 Stall Converter, GM 3.91 Gears, GPI Intake Mod V2, CAI Cold Air Intake, SLP 25% Underdrive Pulley, LS3 Conversion, PRC Ported/Polished Heads, Stainless Power Long Tubes w/off-road pipes, Borla Atak Cat-Back Exhaust, Tru Cool 40K 482rwhp/425rwtq, Built and tuned by Champion Motors |
07-13-2015, 02:46 PM | #4 |
Drives: 2013 Corvette Base Coupe 3LT Join Date: Aug 2014
Location: Spring
Posts: 34
|
If the bulb is going out you dont need to remove the whole bumper to replace it. I just swapped mine this weekend. Took maybe 15 minutes for both.
now if it's the harness, thats a who different issue.
__________________
2013 Velocity Yellow Corvette Base Coupe 3LT
2011 Rally Yellow Camaro 2SS/RS Coupe - SOLD |
07-13-2015, 02:57 PM | #5 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,785
|
I think I read the ballast going bad can make the light glow higher in the spectrum, i.e. blue or purple instead of white, but those ballasts can nip you pretty good so be sure the lights are off before you mess with it.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
07-13-2015, 03:12 PM | #6 |
Homeless Life Chose Me
Drives: LS3 (sold 4/21) Join Date: Nov 2014
Location: Streets of Philly
Posts: 3,650
|
Take a picture I wanna see
__________________
Pity a man in familiar places, who yet feels like a stranger.
|
07-13-2015, 05:53 PM | #7 |
Drives: 2011 2SS/RS Join Date: May 2014
Location: Niagara Falls
Posts: 732
|
I'll try playing around with it this weekend and see what the issue is, hopefully nothing too costly. Thanks for your input! And I tried to snap a pi with my phone but you wouldn't have been able to see it so I didn't even bother.
__________________
"Scarlett" the Black Widow
BTR Stage 4 Cam, FTI 3600 Stall Converter, GM 3.91 Gears, GPI Intake Mod V2, CAI Cold Air Intake, SLP 25% Underdrive Pulley, LS3 Conversion, PRC Ported/Polished Heads, Stainless Power Long Tubes w/off-road pipes, Borla Atak Cat-Back Exhaust, Tru Cool 40K 482rwhp/425rwtq, Built and tuned by Champion Motors |
|
|
|
|