03-23-2016, 02:52 PM | #15 |
Drives: 2015 ZL1 Coupe A6 & 2002 ZO6 Join Date: Apr 2014
Location: Pittsburgh, PA
Posts: 246
|
That's what I thought but sometimes pictures can be deceiving.....thanks.
__________________
2015 ZL1 A6 Coupe Crystal Red
ATI Balancer w/9.55 (22.5%) lower pulley, FIC1000 Injectors, Stainless Works 2" headers, Stainless Works Retro Cat-Back, V-Max Ported TB, Roto-Fab w/Big Gulp, Elite 2nd Gen Catch Can, Jannetty Tuned. 581 rwhp |
03-23-2016, 03:51 PM | #16 |
Drives: 2014 Black 2SS RS 1LE Join Date: Jul 2014
Location: Katy, TX
Posts: 4
|
HP Numbers?
What kinda HP were you making with this setup? Did you have any other mods besides cam and fuel mods?
|
03-23-2016, 05:22 PM | #17 |
630rwhp @ 10psi through stock exhaust. The back pressure of the stock exhaust was killing the power, but I didn't want to push much more than that on stock drivetrain anyway. I did have a custom grind cam also, but that's it besides supporting mods (fuel pump, injectors, tune, etc).
Sent from my iPhone using Tapatalk |
|
03-30-2016, 10:14 AM | #18 |
I could also sell the kit minus the turbos, wastegates, and blow-off valve if someone was just interested in the hot/cold side piping, intercooler, oil lines, washer reservoir, and oil return pump. That way you can build to fit your particular application with whatever turbos you want. I'll take $3400 for that set-up.
|
|
03-30-2016, 01:46 PM | #19 |
Drives: 2015 ZL1 Coupe A6 & 2002 ZO6 Join Date: Apr 2014
Location: Pittsburgh, PA
Posts: 246
|
Did you ever take those other pics? If so, could you please post them?
__________________
2015 ZL1 A6 Coupe Crystal Red
ATI Balancer w/9.55 (22.5%) lower pulley, FIC1000 Injectors, Stainless Works 2" headers, Stainless Works Retro Cat-Back, V-Max Ported TB, Roto-Fab w/Big Gulp, Elite 2nd Gen Catch Can, Jannetty Tuned. 581 rwhp |
03-30-2016, 02:08 PM | #20 |
Here is the hot side pics. The wastegate outlets are plumbed back into exhaust.
Sent from my iPhone using Tapatalk |
|
04-01-2016, 09:10 PM | #21 |
Supercharged LSX
Drives: 2011 2SS/RS Black/Carbon Fiber Join Date: Dec 2010
Location: City of Angels
Posts: 6,741
|
U have any videos with this kit on your car?
Sent from my iPhone using Tapatalk -
__________________
|
04-01-2016, 09:38 PM | #22 |
This is the only clip I can find. It's just a little rev clip...you can hear the turbos spooling down. I'll see if I can find anymore.
https://vimeo.com/161260845 Sent from my iPhone using Tapatalk |
|
04-01-2016, 09:43 PM | #23 |
Here are a few pics of the kit installed.
Sent from my iPhone using Tapatalk |
|
04-01-2016, 09:48 PM | #24 |
I took this right before I pulled the kit off. The car had been sitting for about a year.
Sent from my iPhone using Tapatalk |
|
04-01-2016, 09:57 PM | #25 |
Drives: 2012 2 ss camaro 45th anniversary Join Date: Jun 2014
Location: Long Island, NY
Posts: 63
|
What other parts are needed for the complete kit? the injectors etc.
|
04-01-2016, 10:04 PM | #26 |
The kit is complete, you'll just need ZL1 stainless steel lower manifold gaskets and supporting mods like injectors, fuel pump upgrade, tune, etc. I would recommend using a 3" exhaust also if you don't already have one.
Sent from my iPhone using Tapatalk |
|
04-01-2016, 10:34 PM | #27 |
Drives: 2012 2 ss camaro 45th anniversary Join Date: Jun 2014
Location: Long Island, NY
Posts: 63
|
PM sent
|
04-03-2016, 12:53 PM | #28 |
It finally stopped raining, so I've got the kit laid out for cleanup and packing. Here's a few more pics before I start wrapping it up...
Sent from my iPhone using Tapatalk |
|
|
|
|
|